Work offline with CC during extended periods out of 99 days +.

Similar Questions

• How can I disable always 'work offline' for specific files/folders in Vista?

  Help files offline with all the challenges of Vista, but most of the time it works.  However, I have a number of files that are currently available offline that I no longer need to use offline.  I followed the normal steps of the click right and is going to click on the button "Always work offline", but it is disabled (grayed out).  I thought it might mean that I'm out of sync, but after a synch-all, the selection is always disabled.  Is there a way to Vista to do this?

  Hello DTelford_GSI,

  Thank you for using the Microsoft Answers forum.  The link below explains how to correctly disable offline files in Windows Vista.

  http://blogs.technet.com/askds/archive/2009/03/12/how-to-properly-disable-offline-files-in-Windows-Vista.aspx

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• VMWare Player-Challenge with network installation to enable the work offline connection-thanks in advance for any help

  Thank you very much in advance for all advice here.

  My situation:

  Developer of novice using a laptop Windows 7 with Ubuntu Server on VMWare Player.

  Customer need and server side development progress on the computer laptop while at home and outside (travel, sometimes without internet/Wi-Fi connection)

  I tried NAT, Bridged, Host-only, and can't seem to find an approach that works offline...

  More details below...

  My question

  How to configure the network to use VMWare player for development while home/away (PCI offline without an internet connection)?

  Thanks again

  Tony

  Other details

  My laptop runs Win7, I use Google Chrome, PuTTY, WinSCP client-side

  My hardware router has an IP address 192.168.0.1

  My VMware - Server Ubuntu - is configured to use the DHCP protocol

  Online I mean a wireless connection to the router and the internet

  Offline - I mean wireless internet connection/no

  Networking networking

  Works ok online. Does not work in offline mode

  When online, I get IP 192.168.0.7 ifconfig in vmware... I can ping the router from the virtual machine and ping the server ubuntu from the command-line to Win7

  Offline... Ping from VM to the router and Ping from Win7 to VM fail.

  NAT networking

  Does not work online or offline

  When 'online' I get IP 192.168.91.128 to ifconfig in VMware, I can ping the router hardware virtual machine ok. When I ping the server ubuntu command line of Win 7 I Request Timed Out

  In offline mode, I get the same IP 192.168.91.128 to ifconfig in the virtual machine. I can't ping the virtual machine hardware router... Destination Host Unreachable. When I ping the server ubuntu command line of Win 7 I have inaccessible Destination host

  Host-Only

  does not work for me either online of offline...

  While online, that is to say that I can get the IP... 192 168 110 128 but the virtual machine can't ping router... Network unreachable. Win7 cannot ping server... Request Timed Out

  While offline, I get the same address IP 192 168 110 128, but VM is unable to ping router network unreachable. Win7 cannot ping server... Destination Host Unreachable

  On the screenshot-VMnet1 as VMnet8 - have APIPA (assigned automatically free private) IP addresses, which should not be the case. Unfortunately I can't tell you what is the cause! Could be something of a facility fails to a VPN client. What you can do, is click on the 'Restore defaults' button in the editor of virtual network or re - install VMware Player (uninstall, reboot the host and reinstall "as Administrator").

  If you have access to the virtual network editor depends on the VMware Player version you are using. With some older versions - which had the "vmnetui.dll" in the installation folder - it was possible to start to operate:

  rundll32.exe vmnetui.dll VMNetUI_ShowStandalone

  André

• When I type in Photshop CS6 extended period is to go before the word instead of after.

  When I type in Photshop CS6 extended period is to go before the word instead of after for example 'I went to the .farm' I did have this problem before, just the last two weeks.

  Please tell us how to change it. I can not type because of this.

  You solved my problem, I just switch between two RTL or LTR when I work with different languages.

  Thanks a ton!

• Why is the hitTest function works only with attachmovie?

  Hello.

  I need help. I can't get the hitTest to work for my script below.

  I tested using movieclips created on stage at design-time and collided during execution. hitTest, works very well in this situation.

  But if I use the attachmovie command and create a movie on stage during the performance, the video cannot hitTest with other clips. The hitTest just doesn't work.

  Please help me by recommending changes. I don't know what to do. It is not that difficult.

  Thank you.

  -Aslan

  """"""""""""""""""""

  The script below is essentially to create instances of enemymc, and he will fall vertically, hitting a movieclip target_mc which is set at design time. Please help, out of ideas.

  """""""""""""""""""""

  var enemyTime:Number = 0;

  var enemyLimit:Number = 20;

  onEnterFrame = Function)

  {

  enemyTime ++;

  trace (enemyTime);

  if(enemyTime == enemyLimit)

  {

  var enID: Number = Math.Random ();

  enemy_mc = _root.attachMovie ('enemymc', 'en' + enID, _root.getNextHighestDepth ());

  ["fr" + enID] _root ._x = int (Math.random () * Stage.width);

  _root ["fr" + enID] ._y = - 5;

  _root ["fr" + enID] .onEnterFrame = function()

  {

  var chk:Boolean = false;

  var currMov:MovieClip;

  ce ._y += 5 ;

  currMov = this;

  if (this.hitTest (_root.target_mc, true))

  {

  trace ("the enemy detected a success.");

  }

  if (this ._y > (Stage.height - 10))

  {

  this.removeMovieClip ();

  }

  }

  enemyTime = 0;

  }

  }

  If you have two targets mc then they must have different instance names and you must hitTest for each of them.

  If (this.) HitTest (target_mc1) | this.hitTest (target_mc2))
  {
  trace ("the enemy detected a success.");
  }

  And if you need to deal with them in different ways depending on who gets the success, just use two separate tests.

  As far as why my way and not your way, I have to be honest and say that I spent time trying to get your way to work and by trial and error, I ended up with, that's what you see.  I thought that the biggest change took place (which means he started work) when I changed the hitTest to not include the "true" setting, which I think is applicable to the use of corrdinates, and not an object.  But when I started your code and changed only this line, it still does not work, so something else in my revised code also applies.

  I didn't like using the random calculation for falling objects, which may have been part of the problem.  That will produce a fractional value with a point decimal, and names of the instance with dots in them are probably an accident waiting to happen (ex: en0.27365514)

  If you want to know what changes were absolutely necessary for its work, start with your code and the hitTest change first and then see what must be done to get things working properly.  I was tempted, but I had other things I wanted to do, so I got what I got the job.

• Procedure crashes and closes with ORA-04021: timeout period exceeded while waiting for

  Hello
  
  I am facing a problem in which calling a procedure in a package hangs in "EXECUTE IMMEDIATE" and after a long time out with ORA-04021: timeout period exceeded while waiting.
  I faced the problem in an existing package. Then, I tried a little test and could reproduce the problem.
  Test script is:

  kallo:DZHLHFC1> cat test.sql
  
  CREATE OR REPLACE PACKAGE BODY timeout_test AS
      PROCEDURE execute_immediate( p_cmd VARCHAR2 );
  
      PROCEDURE execute_immediate( p_cmd VARCHAR2 ) IS
      BEGIN
          EXECUTE IMMEDIATE p_cmd;
      EXCEPTION
          WHEN OTHERS THEN
              dbms_output.put_line( 'Command failed: '||p_cmd );
              dbms_output.put_line( 'SQL error message is: ' || SQLERRM );
      END;
  
      PROCEDURE revoke_priv(p_object_name VARCHAR2) IS
          l_cmd VARCHAR2(1000);
      BEGIN
          l_cmd := 'REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"';
          execute_immediate(l_cmd);
      END;
  
  END timeout_test;
  /
  show err
  TIMING START
  REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"; -- Check if command is syntactically correct
  TIMING SHOW
  
  set serverout on size 100000
  TIMING SHOW
  exec timeout_test.revoke_priv('TIMEOUT_TEST');
  TIMING SHOW

  When it is running, I get after release:

  Package created.
  
  Package body created.
  
  REVOKE EXECUTE ON timeout_test FROM "CSG_SUPP_LHOWNER_WRITE"
  *
  ERROR at line 1:
  ORA-01927: cannot REVOKE privileges you did not grant
  
  Elapsed: 00:00:00.01
  Elapsed: 00:00:00.02
  Command failed: REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"
  SQL error message is: ORA-04021: timeout occurred while waiting to lock object
  LHOWNER.TIMEOUT_TEST
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:15:03.03

  I did some analysis and conclusions next concluded that it hangs in "EXECUTE IMMEDIATE".
  1 TOAD "browser session" shows the current statement for this session as a course of execution with "EXECUTE IMMEDIATE"
  2. no lock appear in "browser"->"tab locks session."
  3. If I comment "EXECUTE IMMEDIATE", it comes quickly.
  
  Is - this problem with a programming or an oracle bug?
  
  Thank you and best regards,
  Hey

  Hello

  I think I found the reason.
  I'm changing the grants on the same package (TIMEOUT_TEST) which I am running.
  If I change object_name in order that it works.

  Kind regards
  Hey

• Music apps can work offline on FFOS? And email?

  Hello

  Don't completely grasp the concept focused on the web (for the most part, but not completely) and I would like to know - the music app works offline, get music on my microSD card? And e-mail app, it works in offline mode (can I read already found and read emails without connection to the internet)?

  Best regards, best community out there

  Hello

  Thanks for joining Mozilla Support about your problem.

  Music apps can work offline on FFOS? And E-Mail? / /
  Yes. Apps for music and e-mail can work in offline mode.

  • Music application can fetch the music files from your micro-SD card.
  • You can read the emails already opened without connecting to internet using the Firefox OS email application.

  Thank you.

• How to "work offline"?

  It's crazy, but I can't find out how to work in offline mode. I just have to shut down the internet. Where did put the option work offline?

  You can also find the item menu to work offline in the list of drop-down tools developer.
  You can find the developer tools button in the list of the menu button Firefox '3-bar' and the possible drag this button on a toolbar.

• Portege R600-140: message says: device would work better with USB 2.0

  R600-140 win 7 prof
  I plug in a device of capture usb video and a popup appears saying (roughly)

  + This device would work better with USB 2.0 - Click here for a list of usb ports.

  I thought all the usb ports 2.
  I just checked the drivers in the Panel, and I thought they are all up to date.

  The laptop supports without a doubt USB 2.0 ports.
  I guess that this message can appear for many reasons: for example the USB device malfunction.
  Also the problem of USB port could be responsible for such error.

  So as the first workaround I recommend you remove the USB hubs and controllers in the Device Manager list.
  Open the Device Manager, look for the controllers and USB hubs and uninstall the driver.
  Reboot the laptop

  Usually the system will begin to recognize USB devices.

  Note: during this procedure, all external USB devices must be disconencted

• What wireless router works well with Satellite A200-401

  On the point of buying a computer laptop Satellite A200-401 can anyone suggest a good affordable wireless router that works well with this?

  Steve

  HM, this is a strange question because I doesn´t depends on the machine, the card information wireless installed. But in general a Netgear router is always a good choice... they are reliable, Don t need a lot of power and you can expand your network with these special Nergear '"Externders = range.

  I have a Netgear WGR614 and it works like a charm, it has everything you need.

  Here´s a link:

  http://www.NETGEAR.com/products/RoutersandGateways/GWirelessRouters/WGR614.aspx

  Check it out. :)

  Welcome them

• Output TV does not work properly with my new Satellite A100-812

  Hey everybody,
  A little, I have a problem with my new laptop if not satisfactory.
  The only thing that does not work (except some progs) in Vista is out of my tv.

  After many hours spent trawling the net, I came across different solutions, but none worked.
  The A100-812 has a geforce Go7600 who has taken TV svhs.
  First, I tried to connect to my tv through my old cinch cable. It took me 2 days before I gave up and bought a new svhs cable. Cable that works now and after a hell of a lot of attachment,

  I finally have a working tv. Except that its black and white. I used the click right-> NVIDIA Control Panel and changed the signal. I live in the Netherlands, where B/PAL is the standard. But even in trying all the different types of signals I don't get any color.

  Someone else has had this problem and solved? I downloaded the nvidia latestet drivers and I'm desperate, I bought the laptop to make it work!
  Any suggestion is more than welcome.
  See you soon,.
  Retriever

  Hello

  the problem is that the nvidia drivers are still not final. I have an A100 and desktop system and two systems have problems with tv output. It s Yes, probably a clear driver problem.
  After many surveys, I found many comments in the forum of nvidia, where users are desperate and angry about this issue.
  Thus, the only choice is to change XP up to what nvidia will release some drivers work... that s my way.

  Cheers to a disappointed user nvidia

• How do I know if a site Web Builder software work well with Windows

  I create websites in My spare time for a little extra income I wanted to know how do I know if a software will be safe and work Weel with Windows.i ask because I am thinking to buy a new one from the site Builder that's Coming Out and the last thing I need is a computer crashing here is the software in Question self build product review can someone tell a way to ensure that its windows compatible? and if not how to know? Thank you

  You'd better post this question in the Forum of Windows answers to the following address

  http://answers.Microsoft.com/en-us/Windows

  In any case, for compatibility with Windows 7, you can use the Windows 7 Compatibility Center website at the following address

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Good bye.

• When a download is in progress (for eg. 50% complete) and I put in 'Work offline' mode in Internet Explorer, this will affect the download?

  Query 'work offline '.

  When a download is in progress (for eg. 50% complete) and I put in 'Work offline' mode in Internet Explorer, this will affect the download / download will stop and I have to restart the download again? What would be the status in a scenario like this?

  I think you might have to restart the download.  You can test and see, but with XP, I think it will start from scratch.

  Steve

• Tools / box offline - Windows Live showing always work offline and I have to change it everytime I go to my email

  Problems with Windows live, always showing offline connection and must change whenever I send.

  Under Tools, work offline area was checked when I went to check if it is on. When I removed the checkmark, a big red x is now in the box. This also causes problems with my emails on windows live. Is there a solution?

  CrystalBall © SEZ...

  Windows Live Mail Tools | Accounts | Mail | [account] | Properties | Connection | Always connect to this account... (uncheck/disable this option).

  In these forums, you will find support for Windows Live Mail: http://answers.microsoft.com/en-us/windowslive/forum/livemail