"Workflow" for FCPX AIC

Similar Questions

• "Workflow" for Slow Motion DSLR

  Hi, I've been experimenting with the creation of idle smoothly in a calendar of 1080/25 and questioned on the best workflow. (I used a Canon 70 d, stipulating that 50 frames per second at 720)

  So: Chronology 1080/25 Pro Res FCP7 (majority of the 1080/25 source footage)

  I want to add a short section of idle and for that I shot in 720/50 - but of course it is made at 25 frames per second when added to the timeline and playback is stuttering when 50% of the speed value.

  So I sent the clip (at 50%) to 4 Motion and applied optical flow - this provided a smoother playback

  (I tried to optical flow on a clip of 1080/25 to 50% but reading stuttered slightly)

  I just wanted to confirm if it is the best workflow for idling smoothly.  Also when I tried to apply the optic flow on a second Motion 4 already 'optic flow"selected clip, but when I clicked on that nothing happened - I had to close out Motion and start over with the clip under a new name.

  SMOOTH SLOW MOTION OF 60 P USING CINEMA TOOLS

  http://library.CreativeCOW.NET/ross_shane/slow-motion_cinema-tools/1

• Where are the fonts for FCPX located?

  Hello

  Where are the fonts for FCPX in my MacBook Pro to mid-2015?

  There are 3 files for fonts: System/Library/Fonts, Library/Fonts, ~ Library/Fonts.

  It seems to be Library/Fonts, but I see that some are not used in FCPX, so I want to be sure. If I'm right, why some is used in FCPX? Looking for don't not to add them, just curious.

  The best

  Elmer

  All fonts are system fonts, no specific applications.

  Fonts can be of different Types of fonts.

  FCPX uses only specific fonts Types, not all types, the system recognizes.

• different workflows for different users

  Hello

  I want to create different workflows for different users in bcc atg. As for example I login as a Bishop, I create the project, I can add assets, when the author, I have simple step like deploy to production.  When I login as a normal user, I must follow the normal flow. for this what are the steps that I followed and what files are xml I have change for the commercial user interface.

  Hello

  Finally, I got the interface user of Merchandising for my custom workflow.  to do this, I added a configuration as speedWorkflow.xml file

  PUBLIC "-Technology Group, Configuration of the Application of CCI Inc.//DTD //Art / / IN".

  "http://www.atg.com/dtds/application-configuration/application-configuration_1.0.dtd" > ""

  atg.remote.commerce.Resources

  merchandising.activity.displayName

  atg.controlcenter.view.DividedApplication

  Profile of $accessRight$ sitecatalogread: read; Profile of $accessRight$ sitecatalogfull: read;

  Profile of $accessRight$ mediaread: read; Profile of $accessRight$ mediafull: read; Profile of $accessRight$ storecontentread: read;

  Profile of $accessRight$ storecontentfull: read; Profile of $accessRight$ storesread: read; Profile of $accessRight$ storesfull: read;

  Profile of $accessRight$ promotionsread: read; Profile of $accessRight$ promotionsuser: read;

  Profile of $accessRight$ promotionsfull: read

  / ATG/Remote/ControlCenter/service/GenericDividedApplicationInitializer

  10

  /Common/commonWorkflow.WDL

  atg.remote.commerce.Resources

  merchandising.activity.displayName

  atg.assetmanager.common.view.AssetManager

  / ATG/Remote/trade/service/MerchandisingAssetManagerInitializer

  / ATG/Remote/trade/assetmanager/ContentConfiguration

  /Common/commonWorkflow.WDL

  ApplicationConfigureManager.properties

  & applicationFiles =.

  /ATG/remote/ControlCenter/service/speedWorkflow.XML

• Effective workflow for adding images

  I use RoboHelp HTML 2015 to the author of guides to the user for software products.  My workflow for creating often involves the capture and the addition of images, I have written a text in HR.  For example, I could

  • Write several paragraphs about a topic in HR
  • Make a screenshot of the software product using SnagIt to save the PNG file in a subfolder of the project named Images.
  • Back to HR and click the Image button to insert an image in Design view.

  This is the point where my workflow slows to a crawl, and I'm looking for suggestions on how to reduce the number of steps/click.  The next part of the workflow looks like this:

  • In the Picture dialog box, I navigate to the subfolder that contains my images and the new PNG file.
  • Given that I have not used the new image in a project document yet, the name of the file does not appear in the list of files.
  • I click on another PNG file that was used and manually change the name to match the name of my new image file.
  • The preview window displays the new image, and I click OK to insert the image into the document.

  We try to use a lot of images in our user guides, these extra steps end up adding a good amount of time for the process of creation.  They also distract the task at hand - the creating user's guide.

  There are two things that would make it a lot faster for me.  The first would be for me to be able to say HR folder I want to find my image files so that I don't have to navigate every time I insert a picture.  The second would be for HR to show me the image files, even if they have not been added to a document in my project.

  Does anyone have any suggestions on how to speed up my work flow while keeping the capacity of the author/capture/add images at the same time?

  Thanks for your help.

  Ben

  Hello

  Yes, I feel your pain on the bit to type a few characters as Paul suggested. I begged the developers of this feature for a long time while now nothing does not.

  I see two ways that you can consider which would probably improve this workflow. Both are eerily similar.

  In the first approach, you have a window Explorer Windows open on your site and images. So when you want a picture, you more pop to this window and just click and drag the image in the editor.

  In the second approach, the pod Resouorce Manager allows you to basically do the same thing I told in the first approach. The only real difference here is that you first need to configure the pod of Resource Manager to point to the location that you want to use.

  See you soon... Rick

• IOM: How to create workflows for demand

  11 GR 2 IOM 11.1.2.2

  How to create a workflow to IOM, where an administrator (except xelsysadm) in IOM is able to add a user to a role.

  Links to documentation, tutorials etc. would be useful.

  I guess you're looking at approval workflow.

  The following can be used:

  Development of Workflows for approval and commissioning Manual - 11g Release 2 (11.1.2)

  In addition, many enjoy exercise of the SOA approval workflow is available by oracle.

  ~ J

• Audio workflow for Skype necessary records

  Hey everybody,

  My name is Quin and I did a podcast in my spare time. I use Adobe Audition for both multitrack and registration work, and a recent addition, I did the podcast is recording Skype calls with some people. I wanted to bring in Audition to work with, but I found it quite difficult. First of all, Skype audio settings are (as shown in the screenshot below) quite limited.

  The same files they are audio only - are saved in .mov format and I when I put them in hearing, they are open as stereo audio files with four channels (I think it's the phase) even if they audio seems to be exactly the same in both channels.

  

  I use the range markers to find audio clips I want to insert into the multitrack view. Records that I do at home (inside the application of hearing) with microphones and an apogee Duet, the sound comes out like this:

  

  This audio is really easy to segment and a non-destructive mix in audition multitrack mode. I can use a Bus, and transform this audio in stereo simply (the audio appears in both channels)

  What I'm trying to discern is the best way to take the first section of the audio (with four channels) and send it to the multitrack. When I take a marker of the .mov file range convert and send it to the multitrack mode, multitrack audio levels are far away. Only half of the audio comes as amplified and I can't use a bus to mix to the point where the noise levels are correct. It looks like this, which is not at all what the original noise levels were recorded (see the first screenshot of the display of waveform above):

  Does anyone have a suggested workflow for how I can convert this audio so it aligns the recordings that I make at home? I tried several methods, but they all seem quite long and contrary to intuition and I would really like to hear some busy people more professionally on how I can do that, ideally, reducing to a minimum the number of destructive changes I make to the original audio file. If I do an initial conversion, it's cool, in which case I'd like to hear some suggestions on how to do the same.

  Thank you very much for your time and help,

  Quin

  It is quite easy to get rid of the duplicates. If you click on the track controls (the L R boxes and on the RIGHT side of each track) you can turn off each duplicate, and then they will appear gray on the screen. Then go Ctrl + A to select the entire file and then Shift Alt + C to copy the selection to a new. Only the operating range will be copied, so you'll end up with just both sides of the conversation in stereo, which is what you want. You must save this, and it becomes your working copy. There is another advantage to this as well - will now change you a copy of the original and the original will remain untouched, so you can always go back to it. It is still considered to be good practice!

• Flash website using the conversion (Greensock/Starling/Away3D libraries) to HTML5. Is there an efficient workflow for this kind of mass conversion?

  Hello!

  I read that demoralize him articles everywhere on the great navigators pushing Flash to the side and supporting the HTML5 for awhile now. I have a personal site that I keep and put a decent amount of work using the design. At the heart of the site is driven by external classfiles AS3 using Greensock libraries. Also, I went 3D with 2D content content using the Framework Starling and Away3D libraries. I am researching the possibilities of creating the same types of drawings in HTML5, if possible. Greensock already fully supports HTML5 with its new libraries GSAP. Starling and Away3D I'm not so sure...

  I would love to continue to grow in the same method, using FlashCC, but this is already limited to only desktop browsers. That's fine with me, if it remains bearable on workstations, but at this point I don't really know how well supported Flash will remain same in desktop browsers. I must admit that my real job keeps me pretty busy that my search time is quite limited, so I might be way off the coast.

  Is there any known and efficient workflow for the transition from a site that only uses external AS3 classFiles and 2D or 3D to the HTML5 canvas content? Is this even worth it if I'm comfortable with only to have the support of desktop browser? It seems to me that, at least in the office environment, Flash will retain a strong foot.

  I use the package full creative suite + FlashDevelop as my toolkit and have been reading upward on the discussion of FlashCC targeting HTML5 canvas. It's really interesting to me, but at the same time it seems to work with SWF movies which contain all their ActionScript. It is not the structure that I followed at all, and it wouldn't really work-able at the port just the classFiles external back into SWF movies since not all the .as files has a SWF that is directly related. In other words, I wonder if it is still possible for me to consider a transitional workflow to HTML5 canvas? It seems at some point I might have to bite the bullet and refactor everything from the beginning, which I must admit is not an appetizing idea.

  I just want to start a discussion with Adobe and other creators out there using entirely external .as files and juggle several libraries in their Flash projects for the future. I want to see what workflows are out there to conquer this kind of problem and if supported in the desktop browser environment is even really a problem.

  -Cheers and sorry for the wall of text

  I think you should read more and worry less. Microsoft include Flash Player in IE and Edge. Google include Flash player in Chrome. Firefox Announces recently committed to the development of a Flash plugin, even if they cease to support other plugins. I don't think that Apple will stop supporting plugins at all.

  Thus, all current users of your will see your site for at least the next few years.

• Workflow for specific products/catalogues

  Hi people. I use BC to a customer for over a year now. Online store has been produced all downloadable, so it worked pretty much on autopilot and all customers had to worry about was it supply new content on a regular basis, which was the issue of the use of BC. Problem is the client now wants to introduce one or two products that need to be delivered physically and she must be organized manually.

  My plan was to implement a workflow that automatically sends the customer whenever one of these products is bought. The problem is, I can't seem to find a way to attach a workflow to a specific product in the catalogue. The only option seems to be to set up a workflow for all orders, which means that the customer receives hundreds of emails about download purchases that she didn't need. Of course, you then run the risk of missing a manual delivery e-mail in among others. Clearly I'm missing something obvious (again). Can someone help me?

  In short, how can I get a notification if someone buys A product, but not if they buy products B, C, D, E...?

  Oh man that is rude. I really don't think there is a way to manage the workflow based on a catalogue/product in particular.

  However what we can do is set up your customer in the CRM, and then use drop shipping to warn when a physical product is purchased.

  inside, it is a notice of workflow, just a little less dynamic.

  Catalyst for help | Implement a drop shipping

• Workflow for the deployment TIME of the catalogue.

  Hi team... Am new VCO and I'm not able to find the workflow for the deployment of a paralyzed man in a VDC among the models in the public catalog of vCloud Director. Kindly direct me to the right workflow, method or script if it is available.

  Welcome.

  It's called Instantiate. VAPP model

  Christophe.

• Workflow for the external Site visitor?

  I'm trying to find out what workflow is used when someone visits the external website AND begins its application process. I'm not able to locate the correct workflow.
  
  Thank you, Al

  Unlike SSHRC, iRecruitment don't use workflow for all its transactions. Specifically, iRecruitment uses workflows for the following operations:

  * Offers (sending, outfit and applicant responses) - IRCOFFERWF
  * Vacancies (new and edit)-IRCWF
  * Registration ex-employee (IRCREGWF)

  I don't think that iRecruitment has a workflow for internal or external from the application process, although I think that there is a "workflow" OTA for any applicant who assessment during their application process.

• Check the workflow for 11.5.8

  Hello
  
  We need to know if there any way to validate the workflow (working or not) without using the Application on Oracle Financials 11i Manager (11.5.8).
  
  Our instance of Test OAM is not working properly because there is a JSP error. But we need to test the functionality of workflow for the approval of bills.
  
  At the moment we do not have the functionality of workflow in production, that it is the first time, it must be tested.
  
  Thank you!

  Hello

  Please refer to this document.

  Note: 378281.1 - How does one check that the sender of the Notification does not work properly?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=378281.1

  Kind regards
  Hussein

• Configuration of the workflow for the warehouse does not work

  Hello
  I m trying to create a workflow for a data warehouse, but for that I need to set it up.
  When you go to the Workflow Configuration Wizard, it does not work. any idea?

  Be a little more specific. What is the error you get?

• How to start create breakthroughs of the plugins for FCPX?

  I searched on the advances of the plugins or how to work with 3d to create a plugin for the final Assembly, but without hope of all results on the existing plugins.

  I don't know if there is a community or tutorials to get started with FCPX advanced plugins.

  ... define "Advanced."

  Some say, some of my plugins, for example SCRBBL (contains 3D) is advanced, I would not say so...

  I learned my skills by

  • read the manual

  • asking silly questions to the CSA and fcp.co

  • read books, a classic "how to cheat in motion said.

  • Watch the tutorials of rippletraining, f.mahoney, Simon Ubsdall, mentioning the best

  • Finally buying a few tuts rippletraing

  ... the real business application to understand the Apple pluginSDK (needs free registration as a "Developer") which would add paint clean routines, math, logical operators, design own = programming user interface elements

  ... my humble opinion, it would be advanced manufacturing = beyond me plugin

  good advice is the section query of this Office and, once again, fcp.co

• Best way to convert H.264 to ProRes for FCPX

  Hello! I'm about to get a DJI Osmo device that records in H.264 codec, and I did research on disorders that FCPX will have to try to change this sequence. While some people say that FCPX takes care of everything, most of the comments say that the conversion to ProRes format would be the best way to deal with the stress of editing.

  Apple has a converter for ProRes? FCPX has the ability to convert (If Yes, please explain how and where to do this), or is the only way to do this conversion through a third-party software?

  You have to may not convert H.264 at all, depending on your hardware, and you certainly do not need a third party converter. FCP can transcode at the stage of import, or after you begin your project.

  There is a full trial that you can download and see for yourself how your Mac handles your images.

  Good luck.

  Russ