Working space and the planning of the URL does not not after change of IP address

Hi all

I use 11.1.2.1 and recently the IP addresses of the servers have changed. Because of this schedule and the workspace URL does not work, although EE and shared services work. If I run the URL of space working everything freezes (EAS and shared services) and I have to stop/start services.

Please suggest how to solve this problem.

Thank you

MK

Well there is your problem then

Tags: Business Intelligence

Similar Questions

  • Satellite W30T-A378 from - touch pad and the keyboard does not work

    I have a problem with my laptop, the touch pad and the keyboard does not work.
    Can someone help me what is the possible cause?

    Thanks in advance.

    Hello

    I guess you checked if the Tablet has been properly connected to the docking keyboard.

    Have you tried to unplug and plug the docking again?
    Note: there is a latch on the left you have to move and in order to remove the tablet.

    Perhaps there is a connection problem.

  • CD drive does not open and the light does not work

    original title: single CD player problem

    The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

    My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

    When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

    I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

    WTFFF ideas? I really hope that its not the motherboard

    There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

    "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

    Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

    I tried to connect on a couple different SATA ports on the motherboard.

  • Internet and the sound does not work after uninstalling programs, System Restore also not work.

    I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

    I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    Copy the contents of the cd in a desktop directory.  install from this directory.

    or

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Satellite C850D-11 q - keyboard and the Touchpad does not

    The laptop is a little more than a year and worked ok until recently.

    Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

    He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

    Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

    Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

    Any ideas appreciated?

    Thank you

    Hello

    > Finally cleared the HARD drive and restored windows 8 only
    I hope that you created before Toshiba recovery disks you have formatted the system.
    Did you?

    The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

    > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
    Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
    That is why in most of the cases the keyboard problems could be the causes of physical problems.

    However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

    > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
    BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

    I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
    But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

    So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
    Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

  • HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

    Hello!

    I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

    (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

    Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

    When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

    Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

    It will take a little while for the circuit drain the load on my battery but...

    Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

    Hello @GregPDesWHP,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your laptop is not on, and I'd be happy to help you in this case!

    In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    I hope this helps!

    Concerning

  • CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

    Original title: Ms. Sue Somerville

    CANON PIXMA MG3250 PRINTER

    Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

    I lost instructions and can't download the manual though, like many others I tried for hours!

    I used little of this printer and just need to do simple, but urgent tasks.

    Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

    I don't know about spacing in your message.  Heh

    This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

    These are the Microsoft forums.

    Here is the Canon forums:
    http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

    Here is a link to the manual for the device:

    http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

    I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

    1. Make sure that the power is turned on.

    1. Load a sheet of A4 or letter paper format in the front tray.

    1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

    1. Print the nozzle check pattern.

    (1) press on the button in Maintenance for poster has.

    (2) press the color or black.

    The ground of review of the nozzle will print.

    1. Review the rationale for control of the nozzle.

  • I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

    pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

    Wow!

    So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

    Follow the procedure below:

    • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
    • Make sure that there is no entry of Adobe on the inside.
    • Then copy and paste the Hosts file in folder etc.
    • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
    • When you are prompted, the authentication by password Mac,
    • Be sure to select the option Replace ...
    • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
    • In the affirmative. launch creative cloud application and load the list of Apps and check.
  • Arm, wrist and the screen does not light.

    I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

    Hello

    It is a community of support based on the user.

    To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

    https://www.Apple.com/feedback/watch.html

  • HP Officejet Pro 8600: Recently a fax pops up when I try to print photos and the picture does not print

    We have a printer all-in-one HP Officejet Pro 8600 operating from a desktop HP with Windows 7. Recently, in the last two weeks my wife told me, we cannot print photos. The documents appear to be printed without a problem, but when trying to print a photo we get a window titled 'Send Fax - HP Officejet Pro 8600'. We have never used or even hung fax capablitly since we have owned this printer (maybe 2-3 years). All of a sudden, this window is displayed when we try to print a photo and the photo does not print.  I can't tell you that my wife did not hit accidentally a wrong button somewhere down the line, but she says she does not. I tried to attach a screenshot of the window, but for some reason that it does not take it. It's probably something very simple, but technically challenged myself, I can't understand. Help, please.

    Thank you

    Vince Pellerito

    Print picture of what program?  Some programs to keep their own default values for the printer.  It seems that the default printer for the printing of the photo program has been set to Fax.  Try to open the program, select the Officejet Pro 8600 as the printer rather than the Officejet Pro 8600 fax.

  • Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

    Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

    The phone is new (5 days). It's a wedding?

    If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

    Restore your device from an iCloud or iTunes backup - Apple Support

    Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

  • T410 doesn't start, white screen and the keyboard does not power on.

    Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

    I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

    This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

    Thank you very much

    Pete

    It's the original configuration of your laptop:

    ThinkPad T410 2522BF1
    i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

    I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

    Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

  • code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

    code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

    [Moved from the community centre of Participation]

    Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

    Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

  • I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

    I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

    Hello

    1. what operating system is installed on the computer?
    2. what web browser are you using to play the games online?
    3. don't you make changes to the computer before the show?

    If you use Internet Explorer, then I suggest you to try the steps from the following link:

    The problems of games online using Internet Explorer
    http://support.Microsoft.com/kb/2528246

    Additional information:

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Solve game problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

    Troubleshoot display with Microsoft games
    http://support.Microsoft.com/kb/263039

Maybe you are looking for

  • iOS 10 phone and Message App freeze or Slow

    Hello Updated to iOS 10.0.1 on an iPhone 6 s more. T-Mobile carrier. After upgrade, phone app may be slow or unresponsive. Message app too slow or not responding. Voice mail in the application page phone also buggy. Do not easily play or delete messa

  • NB300 - error creating recovery USB stick

    Hello I just bought a NB300 and have now tried twice to make the Recovery Media Creator with a 8 GB USB and it totally destroyed two sticks of memory new! I followed the instructions, it gets to the bit on formatting the memory stick then comes up wi

  • The only thing that I hate ICS

    OK, so after a week of use ICS they one thing I can't stand is the music player. Those on GB was better. One on GB would always remember what song I was even after a reboot. ICS forget after I stop the player and come back say 20 minutes later. Somet

  • Copy the file on CD - read-only?

    Windows XP When copying files (Word and Excel) to a CD - are the files once on support are automatically marked read-only. The files are not reported as such on the disk. This creates unnecessary confusion from people I pass the CD to. Is - this "dro

  • Port of VPN PPTP WRT120N

    I'm trying to connect to the network through Microsoft PPTP VPN on port 1723, however when I add "Of Applications and games" on the router (chosen in the menu drop-down), it shows as port 1720 and is not connecting. If I port manually before 1723 bel