Works Suite 2003 will not install on windows 7. compatibility issue?
Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.
I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?
· Which edition of Windows 7 you are using?
Works Suite 2003 is not compatible with Windows 7. Click on the link below.
You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.
Apart from this, you can install the program in compatibility mode and check if it works or not.
Make older programs in this version of Windows
See the article mentioned below for the minimum system requirements for the continuation of the work 2003.
Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003
Thanks and regards.
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
My F2110, all-in-One, will not install in Windows 7. Error message says will not be installed with the current operating system. I switched from Windows XP to win7, now my installation disc will not load in win7. The F2110 won't work with Win7 or Win8, only older operating systems?
Hello, welcome to the Forums! I hope you enjoy your experience
I saw your post on the question of facilities that you are experiencing with the use of the disc. There are downloadable drivers available for Windows 7 and Windows 8. The link is below for you!
I hope that this post has helped you!
Thanks for posting and have a great day!
TRUST KEYBOARD ELIGHT AND AULA BEFIRE ARE TWO PLUG-AND-PLAY BUT WILL NOT INSTALL ON WINDOWS 7
1. do you receive an error message or error code?
2 have you made changes on the computer before this problem?
3 is the issue limited only when connecting keyboards?
This problem may occur because of drivers are not installed properly.
Try the following and see if it helps.
Try connecting to another USB port and check if it is detected, or try to connect to another computer.
Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us Note: I recommend to install the drivers for the keyboard and check if it helps.
Remove and reinstall all USB controllers.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Keep us updated on the status of the issue.
Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.
The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea
Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_callerWhat can I do?
HP Deskjet 1056 will not install on Windows Vista
Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.
KB976569 will not install in Windows xp, error OX66A HELP
Follow the instructions in the link:
Codes error '0x8007066A' or '66' was to occur when you install updates of .NET Framework
I hope this helps.
HP Photosmart D110 printer will not install with Windows Vista?
(1) what happens when you try to install the printer?
(2) you get an error message?
Method 1: You can run the fixit available in the link below and check to see if that makes a difference
Problems printing and printing errors
You might want to know
Thanks and greetings
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I can't install CS3 will not install with windows 10 pdf dll file missing
Use compatibility mode.
6 Lightroom will not install on Windows 7 or 10 on new Dell computer. Error message is not Vista compatible.
Settle in the right forum.
Flash player will not install on Windows XP using Opera. Adobe Flash Player 11.5.502.149 has downloaded to my computer. Opera is the browser in use. Can you help me solve this problem?
I have good news! I managed to install Adobe Flash Player 11 by going to my temporary download folder and remove Adobe Flash Player 11, I then downloaded it once more. This time it installed on my computer.
I have windows vista service pack 2. Windows Update is set to auto update. The update for ms-works 9 will not install. I searched the online help but nothing useful. At least I know that there are others with the same problem. Hope you can find a fix for this problem... Thank you
See this response archived from a previous thread:
UTC/GMT is 04:56 on Sunday, April 22, 2012
I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.
I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.
I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck. I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result. At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.
I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.
I would really like to find a way to get the HP software to install. Someone has an idea?
Hello again Tom5223,
I see that we still have problems installing the printer on your computer.
I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.
Thank you for your time.
I am trying to reinstall Illustrator CS4 because it doesn 't start. But if I try to reinstall from Creative Suite disk it freezes and will not install. Running in safe mode, I get a message that it detects an error and you cannot continue with the installation. Please help, I need Illustrator to do my job.
uninstall, clean and reinstall by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
If you still have a problem, use a setup file downloaded,
- Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5.4 (win) 5.4 (mac) | 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit. I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts. No error message. I ran into several related issues lately. I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit. Said it ends, but nothing is installed. Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems? I spent hours trying to solve these.
OK, much better progress!
If the software is always installed, tell him you'll connect later.
Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.
Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.
Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."
Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.
One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.
I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro. Said A WLAN card is disabled. What? I don't know what that means. What can I do?
I suggest you follow the troubleshooting steps form the article and check if it helps.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
Also check with Skylink® support site for more information about the issue.
Maybe you are looking for
I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result. I got down to the wire with whiping the drive and now
Hello! Big problems, I fix a laptop from one of my friends. The problem of the DSB was full chrash :-((because she don't know howe to manage CCleaner and so be sure to remove "any Junk," she avtivated possibilities in the menu. Not much... Little les
Full WIFI signal, but less speed in win 7, another Win 7 PC connected to the same roter fastest watch. WHY...?
HelloIn the Waveform Editor, when I Zoom in directly on the waveform, the points become visible. I have 3 Q: -.What are these pointsThey can be changedHow can I select (with the Selection tool) anywhere on the waveform?I deselected waspish and yet I
I need to downgrade my account and I can't contact support online chat.I can't call because I have a very important speech impediment and I prefer to use based chat.Can anyone help? All I seem to get is the ability to post in the forums, but not to