Workspace URL parameter problem!

I have a URL like this:

http://localhost: 8080 / Workspace? startEndpoint = HelpDeskProcess.InitiationForm

The process name is HelpDeskProcess and the endpoint name is initForm

But when I type this URL in the browser it opens the workspace but it shows an error "'endpoint Invalid Id". "

Any suggestions?

Nith

Sorry, I meant check the TaskManager endpoint point :-) Endpoint Management

I don't check with IE8. However, IE 6 works for me. Can you try to lower the security settings of the browser or may be trying to add this : http://server: port in your list of trusted sites and see if that makes a diff. I know that IE8 has a lot of increased security constraints.

Tags: Adobe LiveCycle

Similar Questions

  • URL parameter problem

    Hello

    I'm new to the development of blackberry applications. I try to access a Web service, I can access using the http connection. When passing a parameter in the URL includes only one word then it works fine and answers correctly, but when I pass the same variable with a different value that contains several words separated by space, then it generates an error. I tried to pass the same URL in the browser, but the browser gives me good performance.

    I believe strongly that there is a problem when the parameter is sent. Please help me

    Thanks in advance

    If you only want to add parameters using percent encoding:

    http://en.Wikipedia.org/wiki/percent-encoding

  • Invalid URL parameter

    Hi all

    I'm developing an application using HttpConnection which should integrete with BES.

    Normally our application works through GPRS in airtel & Vodafone Mobile Connect Service to Vodafone.

    But now I want to integrete with BES. So, I followed the steps in the link below

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

    For example our URL is like this: http://hostort/app; deviceside = false

    Here, I get the error ' invalid URL parameter' in the device.

    Thank you

    Nithya.

    I agree with the previous posters - it is unlikely that he is BES device.  Given that you have properly connected with deviceside = true, a later connection with deviceside = false on a BES device, would have a split-pipe problem.

  • Empty workspace URL

    Whenever the workspace URL opening, he started as empty for DEV, remaining (UAT and Prod) are open

    Browser: IE9

    Version of Hyperion: 11.1.2.2

    Number assigned to: a user

    even the URL works for me, but the user only

    No popup error message

    Workspace_Error_screenshot_For_Oracle.JPG

    Any idea, please share

    Problem solved. Due to the Google toolbar that he asked the question.

    Now it works, once removed from Google toolbar

    Thank you

  • Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

    Hello
    Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
    I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
    * Foundation Services
    * HFM
    * FDM

    Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
    During configuration.
    (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
    (2) in addition, I have selected to configure Oracle HTTP server as a web server.
    These two steps were successful.

    But shared services and the workspace URL do not work. We get a 404 error.
    Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
    Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.

    When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
    Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.

    Can someone please suggest a solution for this.

    # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
    # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
    # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
    # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
    # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
    # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
    # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
    # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >

    Thanks in advance.
    TEJ

    Hi all.

    Thanks for all your useful contributions.

    Finally, the reconfiguration is successful.

    Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

    Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

    Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

    Finally, Shared Services and the workspace URL work correctly.

    http://servername:28080/Interop/index.jsp

    http://servername:28080 / workspace /.

    Kind regards

    TEJ B

  • Get the URL parameter in the Java code

    Hi all

    I have a strange problem. I have a JSF page with two controls:
    -InputText
    -Button

    <? XML version = "1.0" encoding = "UTF - 8"? >
    <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
    < f: view xmlns:f = "http://java.sun.com/jsf/core" xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" >
    < af:document title = "view12.jsf" id = "d1" > "
    < af:messages id = "m1" / >
    < af:form id = "f1" >

    < af:inputText label = "Label 1" id = "it98" value = "#{param.test}" editable = "always" / > "
    < af:commandButton actionListener = "#{bindings.przekierowanie.execute}" = "przekierowanie" text "
    Disabled = "#{!}" Bindings.przekierowanie.Enabled}"id ="cb1"/ >
    < / af:form >
    < / af:document >
    < / f: view >


    And I want to boot the InputText with URL parameter (param name is test - value = "#{param.test}" "). In the JSF page, all right. But after clicking on the button I want to read the value of InputText in Java Code, so I have URL:

    http://127.0.0.1:7101/application6-ViewController-context-root/faces/view12.JSF?test=ASD

    and my Java code that runs when clicking the button:

    public String przekierowanie() {}
    Map < String, String > map = FacesContext.getCurrentInstance () .getExternalContext () .getRequestParameterMap ();
    String tttValue = map.get('zoom') ("test");
    System.Err.println ("test:" + tttValue);
    Returns a null value.
    }

    but it does not work... Whenever I get nothing when I click on the button. Could you tell me why and how to get the value of InputTex in my java function?

    Store the parameter to a parameter of sight and access this setting from Java using EL code.
    Here is the main part (without java code):
    https://blogs.Oracle.com/Shay/entry/passing_parameters_to_an_adf_p

  • Dealing with a URL parameter to be used for a default value

    I have a page of results of detail (the CONTACTS Table Recordset), identified by the CONTACTID

    In the same page, I also have another dynamic relational table, showing all the associated notes that contact record (recordset CONTACTNOTES identified using CONTACTS. CONTACTID = CONTACTNOTES. NOTESCONTACTID)

    It works fine and I can update CONTACTS without any problem.

    My problem is to insert a new record CONTACTNOTES (of a simple URL link) also associated with the same record.

    The primary field (NOTEID) is an AutoNumber but I need to carry out CONTACTS. CONTACTID variable to use as the default value for the CONTACTNOTES url. NOTESCONTACTID.

    I think something like that...

    in the dynamic table on the initial results page, using (/ insertnote.php?) CONTACTID = <? PHP echo $row_recordlookup ["NOTESCONTACTID"];? >) as the link, setting the URL parameter.

    The page insertnote has a recordset insert form, related to the CONTACTNOTES table.

    Now, I don't know how to add this URL parameter as the default field value. Is it as simple as putting the $HTTP_GET_VARS ["CONTACTID"] in the field of the Init val in the property inspector?

    Sorry - worked on...

    On the new page of note insertion, I first created a Recordset, duplicate on the initial results page.

    When you create the form, it was easy then to insert {CONTACTS. CONTACTID} as a default value.

  • by the way the date in url parameter criteria

    Hello

    I want to filter a recordset before a certain date.
    Create the Recordset, if I use a value of execution of 27 November 06 # all records for this date are returned.
    However, when I try to spend the same information through the URL parameter it does not work.

    Is there a problem with this info by the way like this?

    Thank you, Mark.

    Not to be absoloutely fine. The problem is most likely to do with your SQL
    statement.

    A test are not all records. At the top of your page, try
    output from the SQL statement finished on the page to see what it looks like
    as. The problem is, you may need to add the symbols # manually. Expected
    look like

    "SELECT * FROM TableName WHERE DateField = #" & URLParameter & "#".

    HTH,

    Piers

  • Value of the URL parameter with: do not display correctly on the page

    Hello

    I'm working on a page with an interactive report. One report column is a hyperlink to another page (Page deletion). This link goes to an id and a title page delete such as its poster a confirmation message to the end user before to actually delete it. If the title contains a ': ' the text after the ":" is not displayed on the page (visible in the URL on top)

    Is it because that the ': ' separates parameters in a URL to the APEX and, therefore, the text after the ': ' is considered to be the following URL parameter?
    How can we solve this problem?

    Kind regards
    Priya Jetley

    A solution should be not only not to work with the parameters in the URL.

    Simply a process to pass values from one page to another as is:

    BEGIN
    IF: REQUEST = 'TEST' THEN
    P2_ID: = P1_ID;
    P2_TITLE: = P1_TITLE;
    END IF;
    END;

    In this case, your problem is solved, and it is safer because the user does not see what id is passed and can not manually put the id in the URL...

  • Help! : TypeError: Error #2007: url parameter must be non-null. in CS 5.5

    Hello

    Im doing some google ads on Flash CC but noted that google does not a flash drive which is above FP 10.1 so I saved to my Flash 5.5 and the encountered error tis swf files

    TypeError: Error #2007: url parameter must be non-null.

    Global / flash.net::navigateToURL()

    to MethodInfo - 1)

    I work in AS 3 CS 5.5 Mac and export to swf files in FP 9. I'm new on this point and im wondering if anyone can help me?

    Here is my code:

    Screen Shot 2014-02-07 at 10.59.23.png

    Thanks in advance!

    You shouldn't nest a function inside an event listener, let it stand on its own.  In addition, you should try to leave the variable stand alone to assign so that there is a better chance, she is ready when it is called. (these imports are not necessary if coded in the timeline)

    var url: String = root.loaderInfo, parameters.clickTAG as String

    clicktag.addEventListener (MouseEvent.CLICK, processCT);

    function processCT(event:MouseEvent):void {}

    navigateToURL (new URLRequest (url), "_blank");

    }

  • TypeError: Error #2007: url parameter must be non-null - HELP!

    Hey everybody. I (as well as everyone who posts a question here) am quite new to AS3. If I'm going crazy trying to figure out what is the cause of this error. I have a "jukebox" player that loads songs accordingly when the button is clicked. BUT it's my mistake:

    TypeError: Error #2007: url parameter must be non-null.

    to flash.media::Sound/_load()

    to flash.media::Sound/load()

    at lesson09_V2_S5_fla::MainTimeline/frame1()

    And here is my code:

    Import fl.events.SliderEvent;

    create instances of the three sound related classes that will be used for this project

    var snd:Sound;

    var channel: SoundChannel;

    var trans:SoundTransform;

    create variables to store the values for the power of the song and its volume and pan settings.

    var currSong:String;

    var currVol:Number is. 5;

    var currPan:Number = 0;

    Table of all songs in the current playlist.

    var songList:Array = new Array ("nothing on You.mp3","Grenade.mp3","Ride.mp3","Pretty Girl Rock.mp3","Tick Tock.mp3", "Dynamite.mp3");

    don't need to see the volume and pan controls until a song

    panSlide.visible = false;

    volSlide.visible = false;

    Headphones for the buttons of the song on stage

    song1.addEventListener (MouseEvent.CLICK, chooseSong);

    Song2.addEventListener (MouseEvent.CLICK, chooseSong);

    song3.addEventListener (MouseEvent.CLICK, chooseSong);

    song4.addEventListener (MouseEvent.CLICK, chooseSong);

    song5.addEventListener (MouseEvent.CLICK, chooseSong);

    song6.addEventListener (MouseEvent.CLICK, chooseSong);

    headphones for the volume sliders and pan

    panSlide.addEventListener (SliderEvent.CHANGE, panChange);

    volSlide.addEventListener (SliderEvent.CHANGE, volumeChange);

    sets the text of all the buttons of the song field to display the names of the songs in the songList array

    for (var i = 0; i < songList.length; i ++) {}

    var str:String = [i] songList have thong;

    Str = str.replace(".mp3","");

    var clip = this ["song" + (i + 1)] .title;

    clip. Text = str;

    }

    statement to define a song based on the song button was clicked switch.

    function chooseSong(e:MouseEvent):void {}

    Switch (e.currentTarget.name) {}

    case "song1:

    currSong = '... /MP3s/ ' + songList [0] as String;

    break;

    case "song2":

    currSong = '... /MP3s/ ' + songList [1] as String;

    break;

    case "song3":

    currSong = '... /MP3s/ ' + songList [2] as String;

    break;

    case "song4":

    currSong = '... /MP3s/ ' + songList [3] as String;

    break;

    case "song5":

    currSong = '... /MP3s/ ' + songList [4] as String;

    break;

    case "song6":

    currSong = '... /MP3s/ ' + songList [5] as String;

    break;

    }

    }

    If (snd! = null) {}

    Channel.Stop ();

    }

    SND = new Sound();

    SND. Load (new URLRequest (currSong));

    snd.addEventListener (IOErrorEvent.IO_ERROR, onError);

    function onError(e:IOErrorEvent):void {}

    Do nothing

    }

    Channel = new SoundChannel;

    TRANS = new SoundTransform (currVol, currPan);

    Channel = snd.play ();

    channel.soundTransform = trans;

    panSlide.visible = true;

    volSlide.visible = true;

    currVolume and pan values are used here for display in the text beside the sliders fields

    volLabel.text = "Current Volume" + int(currVol * 100);

    panLabel.text = "Current Pan" + int(currPan * 100);

    listen to the arrival of ID3 tags

    snd.addEventListener (Event.ID3, id3Handler);

    triggered when the id3 tags are available

    sets the info text field to display the information of the current song from id3 tags.

    function id3Handler(event:Event):void {}

    var id3:ID3Info = snd.id3;

    If (id3.songName! = null) {}

    songTitle.text = id3.songName + "\n";

    info. Text = "" Artist: \n"+id3.artist+"\n \n ";"

    info.appendText ("Album: \n" + id3.album);

    info.appendText ("\n\n" + "available at: \n" + "passionrecords \n.com");

    }

    }

    var format: TextFormat = new TextFormat();

    format.font = "Arial Black";

    format. Color = 0xFFFF00;

    format. Size = 14;

    format.url = " " http://www.passionrecords.com/ ";

    info.defaultTextFormat = format;

    uses the value of volume slider to control the volume

    function volumeChange(e:SliderEvent):void {}

    currVol = e.target.value;

    volLabel.text = "current Volume:"+ int(currVol*100); "

    TRANS.volume = currVol;

    channel.soundTransform = trans;

    }

    uses pan value of the slider to control pan

    function panChange(e:SliderEvent):void {}

    currPan = e.target.value;

    panLabel.text = "Current Pan" + int(currPan*100);

    TRANS. Pan = e.target.value;

    channel.soundTransform = trans;

    }

    Any help would be greatly appreciated! Thank you!

    This looks to another case of code not be placed where it should be.

    If this code is not in a function, then it executes immediately when the program starts.  At this point, snd is not defined, no said.  You do not create the instance until the line... snd = new Sound();   that, I believe, you have now moved inside a function.

    You might have to go through all the code to see what parts you always floating around this need of houses inside functions.

  • How to enter the germination of the URL parameter?

    How to enter the germination of the URL parameter?

    I found a thread:

    http://forums.Adobe.com/message/4898146#4898146

    But the link is down :/

    http://forums.Adobe.com/message/4715517#4715517

    I would like to pass a variable from a page to another

    Any help would be much appreciated

    SEB

    Hi, Seb-

    I have moved the discussion from archive to the Board Animate.  Then you should be able to click the link now.

    Hope that helps!

    -Elaine

  • Filter 2 URL parameter UNION joined table columns

    _Hi chaps,

    I have a code, which I can't seem to work, think I'm missing something somewhere.

    I want to access the two tables and filter them by column "FK_projid", which is located in a URL parameter "id".

    $colname_rsJobs = "-1";
    If (isset($_GET['id'])) {}
    $colname_rsJobs = $_GET ['id'];
    }
    @mysql_select_db ($database_conndb2, $conndb2);
    $query_rsJobs = sprintf (")
    (
    SELECT
    tbl_jobs. FK_projid,
    tbl_jobs. JobID,
    tbl_jobs. JobName,
    tbl_jobs. FK_langid,
    tbl_languaget.langtname,
    tbl_jobs.jobshipped
    Of
    tbl_projects
    INNER JOIN tbl_jobs
    ON tbl_projects.projid = tbl_jobs. FK_projid
    INNER JOIN tbl_languaget
    ON tbl_languaget.langtid = tbl_jobs. FK_langid
    )
    UNION
    (
    SELECT
    tbl_jobxml. FK_projid,
    tbl_jobxml. JobID,
    tbl_jobxml. JobName,
    tbl_jobxml. FK_langid,
    tbl_languaget.langtname,
    tbl_jobxml.jobshipped
    Of
    tbl_projects
    INNER JOIN tbl_jobxml
    ON tbl_projects.projid = tbl_jobxml. FK_projid
    INNER JOIN tbl_languaget
    ON tbl_languaget.langtid = tbl_jobxml. FK_langid
    )
    ("WHERE FK_projid = %s", GetSQLValueString ($colname_rsJobs, "int"));

    $rsJobs = mysql_query ($query_rsJobs, $conndb2) or die (mysql_error ());
    $row_rsJobs = mysql_fetch_assoc ($rsJobs);
    $totalRows_rsJobs = mysql_num_rows ($rsJobs);

    I get the error:
    You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near 'WHERE FK_projid = 3525' on line 32


    3525 is correct, but I do not know what prevents the code to work... ideas?

    I did have the chance to look at, but you have your select statements wrapped in parens. Try to remove those. Also, you have applied only where clause the the second statement of the Union. Is that what you want?

  • Several items with the PHP URL parameter

    Hi, I am a novice PHP, using dreamweaver only do any programming. I have a page showing 10 products, and within each product, I have a checkbox dynamic named "checkbox" which is linked to the product id. When the user selects multiple checkboxes, I want to display the results on the results page by using a URL parameter. I can get the page to send the url like this:

    CheckBox.php? CheckBox = 100000 & Case = 100100 & box = 100200 & box = 100300 & box = 1010 23Submit = Submit

    I can't figure out how to get more than one display item. I searched and read countless forum entries, but nothing I can work with.

    Here is the form on the home page;
    < do action = "checkbox.php" method = "get" name = "checkbox" > "
    < input type = "checkbox" name = "checkbox" value = "<?" PHP echo $row_rs_products ["Item"];? ">" / >

    On the checkbox.php page, the recordset is:

    SQL: SELECT *.
    PRODUCTS
    WHERE Item = 'products '.
    ORDER BY point CSA

    Variables:
    name of column-$1 _GET ['checkbox']

    Any help is appreciated.
    Thank you
    Roger

    huntlok1 wrote:
    > I get the page to send the url like this:
    >
    > checkbox.php? checkbox = 100000 & = 100100 checkbox checkbox = 100200 & checkbox = 100300 & che
    > ckbox = 101023Submit = Submit
    >
    > I can't figure out how to get more than one display item.

    It's like saying: I'll have a beer. No, I'm getting red wine. No, I'll
    have a cherry brandy. Uh, no, make it a flaming lamborghini.

    Each variable must have a different name. Otherwise, the last one being always
    WINS.

    Since you're using PHP, change the name of your boxes something
    like products []. The empty pair of brackets turn products into
    a table. In your page, you must then activate the table in
    something that your recordset can use.

    > On the checkbox.php page, the recordset is:
    >
    > SQL: SELECT *.
    > From products
    > WHERE Item = 'products '.
    > ORDER BY point CSA

    $products = implode (',', $_GET ['products']);

    SELECT *.
    PRODUCTS
    WHERE point IN ($products)
    ORDER BY point CSA

    --
    Adobe Community Expert David Powers
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Can you make Hyperion a workspace URL aliases?

    We use Hyperion 9.3.1 with WebLogic 9.1

    is there a way to make the workspace URL: \\servername:port\workspace an alias?

    It would be a benefit to our users using something like BFS typed in the URL IE address bar who forward them to the Hyperion servername and port specific.

    STC says:
    We use Hyperion 9.3.1 with WebLogic 9.1

    is there a way to make the workspace URL: \\servername:port\workspace an alias?

    It would be a benefit to our users using something like BFS typed in the URL IE address bar who forward them to the Hyperion servername and port specific.

    If you use IIS or Apache as web server with Weblogic, you can make an html page to redirect to the actual URL.

Maybe you are looking for

  • is it possible to export each chapter in FCPX like a movie without using the tool of the range separated

    I have a movie I created with 26 chapters in there.  I want to export all the individual chapters as separate movies.   I know it's possible by making each chapter using the tool of the range and export everything that is selected.  But, I'm looking

  • Safari now load of items from the new york times or IRS Web site

    Safari now load of items from the new york times or IRS Web site I tried to change the notifications including to get rid of all the I encouraged webgl and plug-ins

  • How more fractions in LabVIEW

    Hello! I have on question, how can - I plus some fractions in LabVIEW? Example: (40/100 * s + 1) + (50/200 * s ^ 2 + 102 * s + 1) How can I make this operation in LabVIEW? Thank you!

  • Multi option - Processing Core in the BIOS

    Hi guys,. I had questions about my r61e running Cubase 5 (creates audio glitches & etc.)-it seems that if I disable multi-process in Cubase it help & he suggested I should do the same thing in the BIOS. My question is - is this negative impact on my

  • Edit an Indesign script for me?

    Hi all!I'm fairly new to Indesign scripting and I have a script here that I would have changed.This script puts a several page pdf in an Indesign file and add pages as needed. From now this script appears in a dialog box that asks you what document I