Workstation HP XW6200 need help.

Similar Questions

• VM Workstation new boy needs help!

  Hi everyone... first post so be nice...

  I'm trying to set up a unified base cluster Communications, I'mon the first server and I amtrying to get the job of network... I have install VMNet2 to bridge with a spare part nicon my desk so I can connect to the cluster for the world outsideand I need to configure DHCP on the network, but whenever I go settings DHCP it forces me to use a 192.168.255.0 subnetand I can not change it... any ideas? No one has experiencein general implementation CiscoCall Manager 6.0 or higher to help VMware</span >?

  Thank you all...

  Rich

  The bundled with VMware DHCP server does not provide DHCP addresses NAT and host networks only. The idea with deck is that it will get an IP address from the DHCP server on your local network or you use a fixed IP address, as is the case of a physical machine on the same LAN segment.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Need help to determine what caused several outbound connections domain workstation

  Need help to determine why my workstation area all of a sudden (in the last 4 days) seems to be launching many connections coming out of remote addresses of dllhost.exe.

  So far, I scanned the machine in safe mode with Malwarebytes, Malwarebytes Antirootkit, Superantispyware, Rootkit Remover (McAfee) and various other applications of identification or remove malware without success. The machine seems to be clean of malware.

  I use Sysinternals Process Explorer to view the file in question, but I can't determine how it is running. The file at the bottom of the screenshot below is the file in question. I've suspended in this shot, or there could be dozens of dllhost.exe initialized below the first.

  Using tcpview from Sysinternals shows that the process to connect to several remote IP addresses which, in many cases, are not identifiable via whois (or I do something wrong, which is quite possible).

  Is it possible to determine what triggers the executable which, in turn, seems to be calling outbound connections?

  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Need help to install on win xp SP2, hp 8300 elite raid drivers?

  I spent to win 7 on HP elite 8300 for win xp sp2. I did this because I had to install a specific software that only works on Windows xp sp2. And now I have the problem with the raid drivers. I need help how to install them, and I don't know if I downloaded the right one.

  Maybe the only solution is to insert sort this driver in the instalation of win xp cd because I don't have floppy drive.

  HP elite 8300

  SERIES:[personal information]

  PRODCT NO.: B0F31EA #AKQ

  Hello:

  Please read the info on the link below on how to integrate the SATA/RAID drivers.  Read the Intel section and read the document about how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The drivers from the link below allows you to integrate. Second listed file is what you need for XP 32 bit.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  The real driver you need is the controller RAID Intel® Express Chipset SATA Desktop/Workstation/Server. But all by wake.

• Need help to set up voice VLAN in SG300

  Hello

  I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

  interface gi25

  switchport mode access

  switchport access vlan 101

  switchport voice vlan 100

  Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

  The current configuration under Gi15 interface is as follows:

  interface gigabitethernet15

  activate the storm control

  broadcast storm control level kbit/s 10

  Storm-control include multicast

  port security throw trap 60

  maximum port security by 10 points

  port security mode max-addresses

  spanning tree portfast

  LLDP-med disable

  switchport mode access

  switchport access vlan 101

  ! next order is internal

  macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

  Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

  When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

  The $voice_vlan macro setting is not configurable by the user

  It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.
  

  I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

  switchport trunk vlan 101 native

  switchport mode trunk

  switchport voice vlan 100

  Cisco-switch macro description

  This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

  VLAN ID - VPT DSCP Source MAC address Interface

  1                    5          46       default           ----                    ---

  * 100 CDP e0:5f:b9:xx:yy:zz gi28

  Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

  Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

  Hello telecastle,

  The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

  (config) #voice vlan id 100

  * This will create the vlan 100

  VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

  State of vlan (config) enabled automatic #voice

  (config) #interface rank fa1-24

  (config-if-range) #switchport trunk vlan 101 native

  trunk (config-if-range) #switchport allowed vlan add 100

  * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

  CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

  CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

  Let me know if this helps.

  Cisco Small Business Support Center

  Randy Manthey

  CCNA, CCNA - security

• Need help developing 'a server scenario' - and MOA &amp; Stuff

  Hi all!

  I need help with the following scenario.

  I have several machines to virtualize via the DRAC or ILO, and I have to keep the local interation in a minimum possible.

  In some sites, I have only one server, do I need to create a virtual computer on a USB drive, install ESXi on this same machine and add to the ESXi virtual machine create earlier.

  I tried to use a CD multiboot I've done with the installer ESXi and MOA on the same disk, to eventually reach:
  1. create a VM with MOA (Windows 2008 R2) cold start
  2 - test this virtual machine with VMware Player on MOA
  3 - reboot
  4. install ESXi
  5 - create a VM 'work' of vsphere client (from my desktop over a wide AREA network)
  6 - start MOA on this work «VM»
  7 use moa to add my VM created in step 1 to the new ESXi

  
  I can't get to step 5, I can't find a way to import the virtual machine to ESXi, I tried adding converter 5 MOA Build, but no dice. Above all I do not see my ESXi host, or I get another error when you try to run the converter 5 4 or 3, the converter to connect on a Vserver, witch, I have not at this time here.

  So any who has any light for me or another possible scenario to reach my goal?

  Of course - there are several ways to do so.

  You say you have Workstation on your generation? -Then, you also have vmware-vdiskmanager.
  With vdiskmanager you can import VMDK in ESXi.

  Other options will need to use WinSCP to transfer the virtual machine - vmkfstools can be used if you are generating MOA with NFS support.

  Recently, I found a way to use the latest Converterversions so...

  If you like to meet via Skype and we know which option is best for your users

• need help for VMWARE 8 with Server 2008

  Hi, need your help for my current problem,

  I am currently using vmware workstation 8 for my MCITP LAB. I have windows 7 OS and host in vmware W/S I installed server 2008 and windows 7 Pro. I have a static IP for the host operating system (10.1.1.31 255.255.255.0 10.1.1.1) DNS - (203.X.X.35 203.X.X.36) and also, I configured two comments with a static IP address. Server 2008 - (10.1.1.191 255.255.255.0 10.1.1.1) DNS (127.0.0.1) have active directory and the DNS service is installed, and there also is the main DNS 127.0.0.1 and for the comments of Pro windows 7 - (10.1.1.192 255.255.255.0 10.1.1.1 (10.1.1.191), the primary dns is pointed to comments Server 2008) I use a bridge network for host OS and the two guest operating system, but when I tried to connect to the internet there is no connection as it is not the internet for the two guest operating system and there is no internal connectivity to the two guest operating system. virtual bridge Protocol option, it is also so please need your help to solve this problem, I can do my TP.

  the main solution, I need, that's how I use the PDC 2008 sever in same vmware W/S with three customer reviews OS I can do my work Practicle without buying a few physical computers. Please see the attached diagram-

  I have core I5 with Virtulisation

  8 GB Ram

  HARD DRIVE 500 GB

  Wireless WLAN cards

  DVD R/W

  Please need help as soon as POSSIBLE.

  Thank you and best regards,

  Martinuzzi

  OK, for the windows 2008, try to install the DNS service (Add Server Manager roles) in there... (you cannot point the others it as DNS if it does not act as DNS)

  also in it the IP configuration, set as follows:

  IP 10.1.1.31

  Subnet 255.255.255.0

  Gateway 10.1.1.1

  Primary DNS 10.1.1.31

  203.x.x.35 secondary DNS (you can also add the 203.x.x.36)

  Do the same for your guests to WIndows 7.

  Make sure all are workers and they can ping each other...

  If everything is OK, you should have internet on them...

• my iphone need help doesent work!

  my iphone need help doesent work! 5 minutes ago my iphone 4S felt on the ground and now it doesent start but I can still hear the sound of loading until I can do?

  PS: Sorry for my bad English, I'm from the Germany

  Try restarting it by maintaining deep-set buttons home and power together. It may take up to 20 seconds. If she does not return to life, better make an appointment at the genius bar to your Apple store.

• Need help to reinstall itunes

  Recently had to withdraw Windows 10 votes against 7, on doing so, iTunes didn't work.  I tried to remove iTunes, but get an error not found the path iTunes6464.msi. So I can't uninstall.  I tried to download the latest version, but when it comes to uninstall the old version it fails because it cannot find this file.  Need help to remove and reinstall so it can connect again my devices.

  See this user of ASC. See the section on deleting and reinstalling iTunes.  Troubleshooting problems with iTunes for Windows updates

• I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

  NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

  Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.

• I need help to recover my iphone

  I got my iphone 6 for more than two years know I default to set up factory reset me gives error tha my sim card is not supported, but I've been with you even with the phone sim card before I reset it please need help.the phone imei-* please help me.

  < personal information under the direction of the host >

  It sounds as if your iPhone may have been hacked for use with the carrier that you used, and now that you have updated, it is locked to the original carrier.

• Need help to install iTunes v12.4.3.1 Windows 10

  I've tried everything to make it work:

  1. I tried to disable my antivirus before installing

  2. I tried to install as administrator

  3. I have tried to uninstall all relevant applications of apple.inc, restart my pc and then install again

  4. I tried to update my Windows

  I had iTunes installed before on my Pc with Windows 10, but two days ago, I restored my pc and now I can't install it.

  Please I need help

  

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  There are three files to choose from if you need choose the one that matches the processor architecture of your system, which must be indicated in the error message.

  • Vcredist_x86. EXE - 32 bit systems
  • vcredist_IA64. EXE - Itanium processors
  • VCRedist_x64. EXE - other 64-bit systems

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• photos were deleted from my phone? !!! need help urgent pls

  So I'll start from the beginning.

  So at the beginning I had 5200 pictures and everything was fine, except that I couldn't take any pictures on Snapchat. So I decided to delete some pictures. Except sometimes just deleted photos would return as 2 seconds. And sometimes I would say 5 photos selected, but I couldn't see anything selected? Or I have to press SELECT again and again.

  at least one forward a few hours and I received on my phone, except that now it says I have only 3600 pictures! I lost a few photos, especially those previously on my phone, then some of the pictures I deleted months ago as last year are back. And I have pictures on my recently removed, but not the ones I lost!

  I feel that my phone is somehow back in time or something.

  And I lost a few photos of a wedding and I regret totally stayed so much (((pls est de toute façon??))

  also, I need help using http://www.ipad-converters.org/recover-photos-from-iphone/ this type also.

  Hello

  When you recharge an iPhone / iPad, it will be saved up to iCloud on wifi you

  Restore the original configuration.

  When configuring back it will ask you if you want to use iCloud backup say yes

  Use the backup of a time where you had all your photos.

  See you soon

  Brian

• After I updated my iPod wants a lock to activate I need help ASAP

  After I updated my iPod lack of activation I need help ASAP

  Help here > If you do not activate your iPad, iPhone or iPod touch after installing iOS 9.3 - Apple Support

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.