Workstation HP z230: z230 workstation

Similar Questions

• Workstation HP Z230: how to disable NVIDIA NVS 315 to use integrated DP and DVI ports

  My HP Z230 workstation was equipped with Windows 7 and an NVIDIA NVS 315 video card.  This card works satisfactorily; However, I recently acquired a monitor Asus PB287Q Ultra high definition (4K), capable of a resolution of 3840 X 2160 pixels.  The NVIDIA card DVI by default generates a graph of the 1920 x 1200 resolution. Therefore, I can't take full advantage of the ability of 4K of my new monitor.

  I tried to uninstall the NVIDIA card to force the PC to recognize the video hardware on the motherboard, but none of the monitors connected to the RFP or DVI ports displays video information.  In other words, my PC recognizes that the NVIDIA card (when connected) and nothing else.

  What should I do?  I'm a LabVIEW programmer and a 4K display is a tool powerful graphics-oriented environments.  Thank you for your help.

  Thanks for your reply, Paul.  I tried what you mentioned, but could not get DP working out until I went to the HP Driver download site and downloaded the Z230 Intel graphics drivers: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5367828 & swLangOid = 8 & swEnvOid = 4060

  Now I have a total of 5 outputs (2 DP and 3 DVI) video! I don't have to remove the NVIDIA cards and I full resolution 4K on the outputs video of DP!  Can not be more happy with my output video.  Now the problem is to convince my supervisor that five monitors high resolution are better than one (not-a-chance).  :-)  Once again, thank you.

• Need suggestion for USB Bluetooth adapter for HP Z230 workstation

  I just bought a workstation HP Z230, with an I7 processor.  I need to equip it with Bluetooth capability so that I can connect the computer to an old Palm Tungsten T2.

  There are gobs of USB Bluetooth 4.0 adaptors / dongles on the market, but in reading the comments of the buyer, they seem to everyone some type of problem with the problems of compatibility or installation on something.

  Anyone has a suggestion for a USB Bluetooth stick that works well with the Z230?

  Thanks in advance for any help.

  Terry

  I suggest to reachthe forum company businessand post your query there.

  Your HP Z230 workstation is a HP business class product and not a class of consumer device. It's the HP consumer support forum.

• 490 1 Workstation Z230 prodesk: BartPE freezes on Prodesk 490 G1 and Z230 Workstation

  Hi all

  My Prodesk 1 490 and Z230 Workstation cannot boot from BartPE Boot CD. It freezes when the Windows XP Logo appears.

  I tried to disable booting uefi, secure boot and stuff like that. Can someone tell me what is the problem here?

  solved. update the BIOS on both helped.

• HP Workstation Z230 - MT: Add a video card to replace the card onboard Z230

  Hello

  I tried to install several graphics cards / video in our Z230, but the result is always the same: error beeps and a power button flashes red. The new favorite card is an Asus Geforce GT640.

  System: HP Workstation Z230 - MT - 1 x Xeon E3 - 122, 3.2 GHz - RAM 8 GB - HARD 1 to - DVD SuperMulti drive

  -How to replace the map on board with another card (or better the Asus Geforce GT640) in the PCI slot?

  -should I disable the onboard in BIOS (if so, how? can't find no associated option)

  We define the screen resolution 720 * 576 second. The default secondary port is the display port, this port does not have such a resolution.

  -720 * 576 resolution is possible on one of the embedded video ports?

  Thank you!

  Hello:

  Your PC come is factory installed with Windows 8 or 8.1?

  If so, you must change both settings in the BIOS.

  You have to enable the legacy mode and disable the secure startup before you install your video card no HP.

• Z Turbo Drive 512GB (G3G89AT): support low-profile for Z Turbo Drive 512 GB in Z230 SFF Workstation

  Does anyone know how to get support low-profile needed to install a Turbo Z Drive 512 GB in a Z230 SFF workstation?

  I realized this quick Spec HP card for my desktop which is located at the following link:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123122

  I bought a kit of option (Nr G3G89AT) directly from HP by phone. I asked the seller HP if the package included support low-profile required for installation of this card in my small Z230 form factor. I mentioned that I thought HP might decided to not include this support as a cost reduction measure. After consultation with someone on the side of HP technology, my sales contact told me that the half-height support has been included in the kit. Unfortunately, when the kit arrived, he did not understand the necessary low-profile support, although the instructions for the kit explain how to remove the flange full height and replace it with the mid-height. I learn that HP doesn't have a part number for this support, it is not possible to order one of HP.

  The missing support wouldn't be a problem if the positioning of the screw half height brackets holes has been standardized. I learned from a search on eBay that the separation between the mounting holes on the maps of more than half-size is 54 mm, but the HP Z Turbo card has a separation of 51 mm between the holes. Therefore, I can't use a generic support for this card from HP.

  When I bought this kit option at HP, I had already purchased the same kit of Alinc Technologies in Austin, Texas. Alinc kit arrived without a low-profile support, but, because the wrong Bill was included in the delivery and the envelope holding the card opened, I assumed half-height support had been lost. To find out how to get support low-profile required for map of Alinc and whether this map was under warranty, I opened the number of cases of HP support: 4752621264. It is through this support effort that I ended up talking to a person of HP sales. I bought the second card Z Turbo Drive with the idea that I would use the first map as a spare. The SFF Z230 workstation only accepts one of these cards, I can use a single half-height for both cards support.

  If someone has the necessary low-profile support, I would be interested in buying it. Of course, I can change a generic low-profile with a hacksaw and epoxy support, but it's a very ugly solution.

  Thanks for any help you can provide.

  Thoth

  In order to get support low-profile necessary to use the Z Turbo 512 GB drive card in a workstation Z230 SFF, order must be for HP Nr G3G89AA (part No. 759771-001) instead of HP Nr G3G89AT.  The card supplied under the two numbers of HP product is Samsung P/N: MZHPU512HCGL - 000: 1, which is equipped with a flange full-height.

  URL for HP Nr G3G89AA: http://h30094.www3.hp.com/product/sku/10782034/mfg_partno/G3G89AA

  The tab "what's in the box" for this web page does not mention the inclusion of low-profile support, so I recommend that this product be ordered by phone and that the part number and product number is appropriate.  The representative business of HP needs to understand that the card is for a station of small form factor, then it will ensure that the low-profile support will be in the area.

  I would like to thank the staff of HP support for the courteous manner in which they dealt with this problem.

  Thoth

• Upgrade workstation Z230

  Hello, I would like to change my processor on my workstation z230 brand new.  I try to use a xeon e3-1270 v3 instead of the e3-1225 delivered v3, but the station will beep beep beep beep on startup with no display. When I look at my bios version I can see L51 Bios 1.02 5 25/06/2003). I downloaded the new version on hp ftp which should be version 1.02 from August 2013 but after him unzipped you can see it's the same bios version of June 2013.

  My question is: what should you do to install my E3-1270V3 xeon?

  and is there a place to download a new version of the bios?

  Thanks a lot for your help.

  Jack

  OK problem is now solved. The reason why my post was what beep xeon 1270-v3 doesn't have any BUILT-IN graphics card. and the xeon 1225-v3 comes standard has a componet INTEGRATED graphics. So my solution was to plug a nvidia quadro graphics card in the express slot pci and everything is ok now.

  problem solved...

• What software to a workstation HP Z230 would you recommend?

  I just bought a new Hewlett Packard Z230 Workstation with the intent to catch up on a big backlog (of the hundreds of hours) of family videos, I want to clean up and change.  This computer is configured as follows:

  Intel I7 4770 Quad Core 3.4 GHz (showing 8 processors in control panel/system/processor) current execution

  16 GB of ram

  C: drive of 256 GB SSD

  3 to 7 200 RPM drive D:

  video card nVidia Quadro K2000 with 2 GB of video ram

  Windows 7 Pro 64-bit

  When I bought this, I had planned on using Cyberlink PowerDirector because they announced that it works well with the features of this computer.  I downloaded a trial version of Power Director, and it satisfied my functional needs.  But he locked up three times in an hour.  When I wrote Cyberlink, they have asked for information like the DxDiag.txt file that describes my computer and blocks Windows event logs.  Their response was BAFFLING, because they said that they design their software to "level of consumer platforms", and since they test their software on "workstations", they may not recommend my use on the Z230.

  That said, I'm now looking for other software.  I used Pinnacle a lot in the past, but it has changed so much since the version I used, I'm not married to any brand at this stage.  In addition to the usual editing capability, I want to check that the software that I buy has specific abilities, I need:

  -Ability to video clips of cultures and expand others cropped 16:9 scene (because I have a few incroachment in video excerpts from the hood of the lens of a camera).

  -Ability to normalize audio levels of the different clips (some too loud or too quiet) before producing the video.

  -You want, don't not required: ability to burn DVDs or DVD on a computer other than the one where I'm editing.

  More, if not all, editing software has these capabilities now (PowerDirector and Pinnacle do), so this shouldn't be a problem, but I just want to check.

  Any help or advice would be appreciated.

  Thank you

  Terry Quinn

  Terry,

  Sounds like a ton of frustration!

  My comments:

  • You say you have hundreds hours of videos of family; you need a professional level solution, or you will simply be driven crazy!
  • I suggest to buy Premiere Pro CS6 (expensive but permanent license) or the first Pro CC rental (monthly subscription model). These two fully use your hardware (processor, memory, GPU and whole disks) for the best possible, editing experience - I highly recommend to choose one of the two options and do not look back. With many hours of video, you want to have a platform which publishes fine without having to make each scenario over and over again just for reading and gently rub.

    [sidebar: I do not work for Adobe, I don't do that professionally and I made photo and video editing as a consumer for more than 30 years well.] Announcement over these years, I had the chance to try a lot of different hardware and software solutions (well Yes, Panasonic / Sony bridge-to-bridge linear edition on hardware Hi8, VHS, SVHS, then Pinnacle and assisted Matrox solutions PC (signs $ 1000 added to the PC to handle DV and SD non-linear editing formats) [and for the last decade, using Pinnacle Avid Liquid / / first / only Vegas software solutions])

  • Your system is pretty solid, except for the video card (empty the Quadro and get a 2 GB card NVidia GTX 770). Add a matching 3 TB HD and make a record of 2 x RAID 0 set would give you much more speed and ability too in the field of training and is an upgrade I would propose as well. You don't have a lot of video indeed!

  You absolutely must talk about what your media here to get the best advice.  Are you using editing AVCHD, DV, Hi8, etc. ? It is very important to determine the level of the CPU, GPU and drive speed that best fits your need. Not all video is similar and consumer HD (AVCHD) is radically more taxing on a PC than mini-DV, for example. Since you say that you have hundreds of hours of video, I guess you aren't in 4 k yet!

  Kind regards

  Jim

• Workstation HP Z230 - update of the Bios does not, cannot restore bios

  OK, I've updated the bios, when he was busy just updating the screen went black. I left it for an hour and no change.

  Restarted the PC and it does not display anything, the Start button is now red and it beeps 8 times then start button goes blue for a while then red and beeps etc.

  Judge: (nothing has worked so far)

  1 according to the bios reset button

  2 download the lates bios update and tried to install the DosFlash via USB

  What else can I try? Thank you

  OK, problem solved. I eventually copied back Flash files on cd, machine to rebooted and it worked.

• Identify and verify Z230 HP workstation build-in the raid HARD drive

  Hi all

  I would like to know how to check the status of the hard drive with raid? (Se connect/disconnect/transfer/etc)

  In addition, how I read and open documents from the secondary hard drive to ensure its backup successfully, so that my main hard drive works at the same time.

  Help, please. Thanks in advance.

  You are welcome.  Thank you for the additional information.

  Here is a video that will explain a lot better I can of RAID 1.

  The answer to your question is, no. you'll see why when you watch the video.  If you see the drive in the Device Manager everything works correctly.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• keyboard driver of kU-1156 for W/8.1 64 desktop Z230

  (Note: HP expert Paul Tikkannen asked me to this post on these pages too.) Was posted previously too http://h30434.www3.hp.com/t5/Desktop-Hardware/bd-p/HardwareDPC )

  I got a workstation Z230 last week. It came with 2 DVDs that have W/8 and drivers on it (DVD 748764-A21 and 752204-B24). Using those I installed W/8.1 64 - bits and drivers. It does not install a driver for the KU-1156 keyboard that comes with the desktop (keyboard we International with a few special function keys). While the default W/8 Driver is installed. I checked the DVDs and there is nothing on them for any keyboard. The driver file SP44447.exe located on the HP Web site for this keyboard stops and a message saying that it only works on Windows 7.

  Some fake website (DriverArnea.blogspot) claims to have the driver, but the download link points to a .exe that contains anything other than the pilot.

  Any body can help?

  Problem solved: FN keys for this keyboard are supported by the standard Microsoft Driver. Some services did not work; Since my company tech guy set it to "automatic".

• Workstation guarantee

  I have a question! I bought HP Z230 and I want to upgrade my workstation with over-pants W5000 and OCZ RevoDrive, so I would like to ask you is it necessary to go to HP service for this type of upgrade, or I can put this material myself without losing the warranty or should I go to HP service?

  Thanks to the front!

  Best regards!

  Toma

  Hi, Toma:

  See the answer to Q17 on the link below.

  http://h40059.www4.HP.com/warranty/information/FAQ.php#17

• G1X32ET #ABB: keyboard driver of kU-1156 for W/8.1 64 desktop Z230

  I got a workstation Z230 last week. It came with 2 DVDs that have W/8 and drivers on it (DVD 748764-A21 and 752204-B24). Using those I installed W/8.1 64 - bits and drivers. It does not install a driver for the KU-1156 keyboard that comes with the desktop (keyboard we International with a few special function keys). While the default W/8 Driver is installed. I checked the DVDs and there is nothing on them for any keyboard. The driver file SP44447.exe located on the HP Web site for this keyboard stops and a message saying that it only works on Windows 7.

  Some fake website (DriverArnea.blogspot) claims to have the driver, but the download link points to a .exe that contains anything other than the pilot.

  Any body can help?

  Problem solved: FN keys for this keyboard are supported by the standard Microsoft Driver. Some services did not work; Since my company tech guy set it to "automatic".

• Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

  Hello!

  I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
  I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
  Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
  When I install it?

  Thanks for your support!
  Rgds
  Flamboyant

  Using Thunderbird on your second workstation - the only option would be to create a Pop email account
  so before you download anything, you must configure the account settings to "leave a copy on the server.

  Tools > account settings > account for Pop mail server settings.
  or
  Menu icon > Options > account settings > server settings

  • Letter: look for the e-news at startup
  • Letter: arrival of new messages every xx minutes
  • Select: automatically download new messages
  • Letter: Leave messages on the server '
  • Click OK

  E-mail POP accounts can only download the mail from the Inbox server.
  This will allow you to remove off the coast of the secondary workstation and leave it on the server.
  However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

• After the Server 5.1.5 upgrade network user cannot connect by most workstations

  Hi all

  Intro

  I upgraded one of my client of 10.6.8 Xserve server at El Capitan / app 5.1.5 server.

  The server is configured with the network homefolders and mobile homefolders. We also use PCS. The 10.6.8 configuration has worked perfectly and still doesn't work. But now it is time to move on.

  The upgrade process from was relatively smooth. I had to configure the interface network again, then check DNS (front / back) and I also had to re - install the SharePoint, including network sharepoint (via AFP) houses.

  Problem:

  Then, I started to test the connection as users of the network on client computers. I found that it was not possible to connect from most client computers.

  After entering the login credentials was refused immediately. As is the case when entering the incorrect credentials.

  On client computers, nothing has changed.

  Client computers running Yosemite 10.10.5 and some are running 10.6.8

  As soon as I reboot the Xserve 10.6.8 original that's all is back to normal.

  What does not work:

  Those who connect has worked well:

  • Mobile sync (on Unassigned Computers)

  • Log is as user network at home (on Unassigned Computers)

  • PCS worked fine. New settings have been made correctly. On all computers.

  • Automatically install some actions has worked well on all computers. It is a local administrator on the client computers. When connecting to the account, the network shares are mounted using PCS.

  • Resolution of the DNS of all client computers

  • DHCP works OK

  • Client computers running 10.6.8 seem to be not affected.

  At one point one of the workstations involved that did not work, started working.

  What I tried and not solve the problem:

  • Renew DHCP client

  • Removed liaison OD and put in place again

  • Trashed records managed preferences (these have been re-created correctly)

  Ideas on possible causes:

  The most logical causes of this behavior might be:

  (1) client computer cannot find the master OD.

  (2) the powers of negotiation fails.

  Since the Division of the OPPOSITION binding work, works PCS etc., the client computer is the master of the OD.

  The latter seems the cause more lickely. Ticketviewer does not show tickets. Ticketviewer by using the credentials of a user of OD manually requesting a TGT works very well.

  All advice is appreciated.

  Kind regards

  Nico

  Hi Nico,

  Maybe the problem is related to the AFP. Have you tried disabling AFP in Systempreferences and delete all shares. After this restart AFP and try to add shares again. Have a look at the access privileges. It is urgent to remove and re-add the userfolders on the server share.

  Good luck

  Peter.