Would be - a lens wide angle work here?

Similar Questions

• Camcorders that can adapt to a lens wide angle?

  Can someone help me please? I'm looking for a camcorder wherein I can fit a lens wide angle to cover a wider area. can someone tell me what are the camcorders sony I can set a goal wide angle. Also I would like to know what lens wide angle corresponds to this particular model. On a side note, I already have a CX380 HDR, but it seems I can't attach a lens wide angle as it has no son. Thanks for your help.

  I discuss with a representative and it gave me these two links. It gives you the lens and compatible camcorders that work with the lens. Hope this helps other too.

  http://ACCY.sonydigitalimaging.com/products/model/VCL-HGE08B

  http://ACCY.sonydigitalimaging.com/products/model/VCL-HGA07B

• I own the Canon SX HS 50 and love it, however, I like the lens wide angle on the SH SX60

  Canon sx hs 50 is a bit amazing camera with the possibility of zoom to large and clarity.  I had a little more than a year.  The new sx 60 SH has some new features that I like... the lens wide angle and the creation of custom effects.  However, the stability of the camera is very fragile when zoomed out.  I question the value of the upgrade of the 50 to 60.

  My shots are more abstract... by zooming in on the structures, eyes, etc.  I can take pictures of my car with the 50 but not sure that this would be possible with the 60.  I appreciate any input... or is there another cannon with the lilke long zoom of 50 with some of the features of the 1960s.

  Thanks a lot for your comments,.

  I don't have one. But you said you've tried, so I guess you tried in store right? In-store, normally the brightness isn't enough so the shutter speed will be slow and you will see shake. In addition, setting the device also comes into play here too. The best way, take the 50 SX with you to the store, set the similar to your 50HS 60HS. Then take the photo and compare. Sometimes, in the store settings are not optimal.

• lens wide-angle compatible with Canon eos Rebel t5 for $300 or less

  I'm looking for a good wide-angle compatible with my Canon eos Rebel t5 camera. I'm on a tight budget and would like to spend $300 or less on the lens. If you have any recommendations, please let me know.

  FutureSailor wrote:

  I'm looking for a good wide-angle compatible with my Canon eos Rebel t5 camera. I'm on a tight budget and would like to spend $300 or less on the lens. If you have any recommendations, please let me know.

  The STM IS to Canon EF-S 10-18 is your clear choice.

• Taking wide angle, inside still shot s for rental properties with my Rebel T3i

  I am the owner of the apartments and really struggled to get good shots of small rooms. My Rebel EOS T3i came with the EFS 18-55mm and 55-250 mm lens kit. I took a few photos wide-angle still rooms with lens 18-55 mm EFS, but my apartment rooms are usually quite small (think of the living rooms of 12 x 12 and small bath, etc.).  I just want to be able to adapt a bit more in the picture I'm getting right now, and I just can't back up far enough in the room. A slight distortion is OK. I saw some pictures of the great Hall with an adjustible 10-22mm, but I don't know if I need an adjustable lens, and it seems that they cost much more. Someone recommended using a fixed lens. Any ideas on a good objective fixed size (if all goes well at a reasonable price) which should work well with my camera to this effect.  I am a newbie so sorry if I did not give sufficient details. Ideas that you can give me would be great.

  EF-S 10-22mm lens lens is probably just what the doctor ordered.  If you wish, rent a copy (many places rent them... LensRentals, BorrowLenses, B & H Photo, etc.) and try before you buy - but I suspect it's the goal you want.  There is competition a few lenses with similar focal length ranges... the Canon tends to get the best reviews.

  It is a lens wide angle 'straight'--which means that all the "straight" will actually continue as 'straight' in your photos. In a "Fish-eye" lens straight lines (aka "curvilinear") are not preserved and will appear rounded (unless the line gets to pass through the center of the image).

  But there is a problem... If you're not careful, these objectives very wide angle will change things that * should * appear as rectangles (windows, doors, etc.) will turn into trapezoids (keystone forms) - and in architecture, it may look unpleasant.

  To avoid this, the camera must be 'level '.  Make sure that the lens is not slanted downwards or upwards - leave the level.  As long as the appliance is level, the lines on the sides of your doors and windows will be standing and not lean - creating wonky shapes.

  Good luck!

• lenses wide angle

  I finally broke down and bought a 5 d mk III.  Now, I want to buy a lens wide angle.  I have a 24-105 l; 70-200 f4L is and and a 50 1.4.

  I'm not married to canon for wide angle, but here a quality lens, whether main or zoom.  Any suggestions?

  I really like the EF 20/2.8 on my FF camera...

  

  

  

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Best first lens for macro photography wide angle

  I am looking for more information on using lenses wide angle and tube extension to close to the top of the photograph.  The images will be used to capture the surface contours using PhotoModeler software.  This requires the use of a first goal.  I bought a 60mm Canon macro lens, but focal length is a bit long and surface data contain a lot of noise because the light rays are nearly parallel.  The target area containing reference marks, who must fill the area of the image of my 7 d is about 1.5 "square and the topics, located in the Center, are usually smaller than 0.75".  I'm looking for the 20 mm gun (or a 24 mm lens) for use with extension tubes.  Someone with experience with these lenses in close-up photography?  If so, what depth of field could hope for.

  I will propose a tilt shift lens and series II Canon 24 mm or one attachment bellows with a lens in the 35mm range.

• Samsung Ultra wide angle (S29E790C) Compatibiblity

  Hello

  I have a laptop USPHL-LT-1238RG and wishes to buy a monitor Samsung ultra wide, specifically the model S29E790C.  My laptop is useful with this model?  Would there be problems?

  Best regards

  Samantha

  DisplayPort is a specific type of interface for the transport of signals from a computer to a monitor. I know that this monitor has a Displayport connection for the input signal. The reason why I need to know the model of the laptop is to see if it supports Displayport out.

  The cable looks like this:

  

  https://en.Wikipedia.org/wiki/DisplayPort

  And your laptop has a displayport on it. See page 2 item 2 of the plug here:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04472796.PDF

  Samsung also provides the software for monitors ultra wide angle that is useful.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• If I buy a laptop at the Canada will work here in the United Kingdom?

  I was wondering if I bought a laptop in canada she would work here?

  I got my 3 recent laptops (Yes, 3 toshibas) of the States and their use in Europe. Everything works as it should.

  The only differences would be out of the TV... it's Europe Pal and NTSC Canada, but there is no need to worry because it's usually adjustable from inside the BIOS settings. (please have this confirmed through owners)

  In addition, the reader DVD Canada works in a region other than our 2 European region, but this can be changed 4 times, until it is permanently attached.

  The power supply is self-switching too, allowing you to use your laptop to 110 Volts - 232 Volts without the need to buy a different model. Only a hardware adapter (max of 2 Euro) may be necessary to make it fit within our caps.

  The only problem you might face is locate spare parts (mainly the chassis). I've seen a few models that have different chassis in Europe and Foreign Affairs. But in case you need something, you will always have access to appropriate spare parts because they are widespread in the whole of the internet.

  Good and bye buy ;)

• Wide Angle Images are vignetting after Conversion to DNG - please help :-)

  Just bought a Canon G1X
  Convet the Canon CR Raw Adobe DNG files. (Cany use Canon Raw files on my Adobe Camera Raw CS3 CR
  All DNG images taken end of the zoom wide angle have very pronounced vignetting - appear as there is a very long visor on.
  The same images appear fine on the screen rooms and in the Canon software.
  This seems to happen just during the process of conversion to DNG format.
  At the moment I can't treat Raw images in my CS3 and I have to use the substantial software Canon gives at least with the camera

  Any help would be greatly and warmly appreciated!

  Thank you

  Probably what is happening, is that the DNG file tries to use DNG 1.3 accent extensions, that will not recognize CS3.

  I suggest try "Custom DNG compatibility", backwards Version 1.1 and linear (demosaiced) for compatibility settings.

  Sandy

• My iphone 6 purchased in London, ceased to operate in China.  He worked here a lot about since 6 months? Now I can't connect with my Apple ID.

  I bought my iPhone6 in London last August 2015.  But when I returned to China to work.  I took a contract of "China Mobile" and insert their SIM card.  The phone worked perfectly for 9 months until three weeks ago.  I could Google search using my VPN, search BAIDU server of the Chinese internet, translations, cat on do QQ and WeChat popular programs in China are translations.

  However.  Now, when I turn on my phone.  I can't get internet connection.  So I can't connect with my identifier Apple and ID also.

  Then it freezes - won't work - then having to close my phone completely.

  I checked with my business Mobile of China last Friday.  I have more credit than necessary on this subject.  They gave me a new SIM card.

  But still I can't work internet?

  Advice please?

  You know - be in China - you need for translation of internet to work here.  Or you are lost?

  Thank you

  Clear your phone and set up again, do not restore the backups.

• Adaptive Wide Angle - control of the tools of coercion

  Hey friends,

  Having a few frustrating problems with this very powerful tool.

  I'm stitching a panorama made with pictures taken on a 35 mm lens and using the Adaptive Filter large right angle curved lines.

  Using the constraint from the outset tool does nothing, the lines don't naturally curve in the curves of the lines in my picture.

  If I set the setting for the fisheye, it helps a lot. Photos of tool constraint upward on the curves in the center of my pano, but two problems arise:

  (1) parts of my image get completely cut off for some reason I can't understand

  (2) when you use the tool of coercion to the edges of the image, the curve of the tool goes in the opposite direction of the curves of the line in my image, which actually makes the curves of my worst image rather than remedy.

  Is it possible to manually force the curves of the constraint tool? I use this wrong why? I should the registration form this?

  Thank you

  I think the do in LR will have the same question, as it's the same camera Raw conversion engine. To get the tool Angle wide adaptation to work, the pano should be created in PS. If all goes well, they will have a fix for the ACR & LR versions soon.

• The EFM 22 mm f/2 lens STM will work with my Canon eos Rebel t5?

  I'm looking at the lens Canon EFM 22 mm f/2 STM and I wonder if it will work for my Canon eos Rebel t5. I need to know as soon as possible. I searched other places online and cannot find something that answers my question. If anyone knows and could tell me I would really appreciate it.
  Thank you!

  EF lenses - M fit not rebel or any Canon DSLRS. They are for the M series cameras.

• Intel WiDi Pro works with Microsoft Direct access?

  Our company deploys a Direct access to avoid using VPN tokens, so the use of laptop with Windows 7 without DA WiDi society construction works without any problems, but when you add DA at this laptop it stops work WiDi. He will see the WiDi adaptor and even ask the PIN code, but once to enter the CONFIDENTIAL code to connect to the screen, it will lose the connection, and then I also have to reset the WiDi dongle (we currently use the dongle Microsoft WiDi)

  For all help and advice on how to the GET WiDi work with the DA would be appreciated

  Thank you

  Wayne

  Hi Wayne,

  Thanks for posting your query on the Microsoft Community.

  That you are connected to a domain network, I suggest you re-post your query on The TechNet Forums as we have experts working on this type of questions and for you to help.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to resize panels (very) wide angle?

  Hi all!

  I have a problem in Photoshop CS5 (Windows version v12.1 x 64).

  My screen resolution is 1680 x 1080, but almost all of the 'extra' screen space is plagued by wide panels.  I can't adjust the width, it is locked for this extra wide look (see photo below). For example, my actions panel is two columns wide. It would give me a lot more space on the screen if I could have only one column.

  P. S.

  I understand that some panels are wider by default and therefore affects other panels if they are grouped together, but they cannot be resized even when separated.

  Best regards.

  

  I think it's just a case of something to do with the version of cs5 help.

  If the word in the language uses much longer than the English equivalent names.

  In any case, it's the only thing I can think of.

  Here is a picture of cs5 with screen resolution 1024 x 768 on my windows machine 8 value