WPA2 and p1102w printer

Similar Questions

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• Unboxing and configure the HP LaserJet Pro P1102W printer

  Learn how to perform a unboxing conversion and configure the HP LaserJet Pro P1102W printer.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.

• MAC address and P1102W

  This is my first post here.  I just bought a new P1102w printer.  I put it up to use USB.  Now I want to use wireless, but I use a MAC filter through my router.  I think I found the MAC address of the printer.  He was under the hardware address and 12 characters.  I entered in my router.  Now how I swtch USB wireless?  I tried to read the manual but couldn't find it.  I did unplug the USB cable and press the wireless button, but nothing happened.  I tried to print a page but nothing printed.   Any help would be appreciated.  Thank you

  First of all, MAC filtering is not an effective security measure, and it makes your difficult to manage network.  Read more about it here.

  Start by unplugging the USB cable between the printer and the PC.  If you use Windows: start > all programs > Hewlett-Packard > [your printer model] > add a device.  When he asks, choose a network device and follow the instructions.

  If this does not work, download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• Can you have configured USB and wireless printing simultaneously on mono Laser HP 1102w

  Hi guys / HP,.

  I was wondering if you have the configuration of p1102w printer HP mono laser for both cable USB2 cable to laptop and wireless at the same time.

  Try to install the printer with the two configurations via the installation on my HP Pavilion dv6 laptop CD.

  Because when you install the printer CD, he asked for one or the other i.e. USB or wireless.

  Y at - it an easy solution.

  Concerning

  Mike

   

  [Content removed]

  Hello

  You should be able to connect the two, but not Ethernet and wireless at the same time.

• P1102w printer driver in the Lion of the mountains or the Mavericks

  I get conflicting info about whether Laserjet Pro p1102w will be printed with the Lion of the mountains or the Mavericks. In a support article titled "install the printer on a Mac Running OS X v10.8 (only for network connections) Mountain Lion".

  It stipulates that:

  "This document explains how to set up your printer on a network with AirPrint. Update HP drivers and software for Lion of mountain are not available for your printer. »

   

  
  You can also read on the data sheet:

  Operating systems supported

  Hello

  The drivers for the Mountain Lion and the Mavericks are accessible to the general public via Apple Software Update.

  If you want to use your wireless printer and the printer is already connected to your wireless network, restart your Mac, run Software Update, click the sign under Print & Scan / printers & scan and add the printer.

  For USB or connect the pritner to your wireless network, connect the printer to your Mac with a USB port and confirm a prompt to get the latest drivers.

  To set up a new wireless connection under OS X Lion v10.7 > Option two: change your existing connection to a wireless connection type in the following document:

  http://support.HP.com/us-en/document/c02847467

  Kind regards

  Shlomi

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

   

• my hp lazer jet p1102w printer resume printing via airprint when not available

  Hello

  I have the hp lazer jet p1102w printer. I've upgraded to the latest firmware.

  What is not available in the printer paper and I reload, it does not resume printing via airprint in my ipad.

  especially when I want to print on both sides. I can't resume printing. What should I do?

  Hello

  Once you have loaded paper in the tray, open and close the printer cover. who will resume the print job and complete it.

  Shlomi

• HP p1102w: printing from Mac OS 10.10to hp p1102w wireless

  Wireless printing failed. When I go through the process to put in place the enemy wireless with USB connection: when I click HTML configuration, I can't go any further, and an error message is displayed as follows: this page contains the following errors: error on line 6 in column 47: entity 'nbsp' not defined and the error on the column of the row 12 8 : opening and ending tag not correct: link to line 0 and head. Help. MY OS IS 10.10.3. And the printer is HP p1102w. REPEAT HELP

  Hi @Eoj25karfuno,

  I see that you have problems running the HTML configuration. I'd love to help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)
  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer Wireless:
  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.
  Print a Configuration Page.

  Remove the printer in printers and Scanners and add it again. You may need to click the P1102w in the drop-down menu, do not use the default driver.

  Here is a screenshot, it is a printer model different, but just to show you what it will look like.

  

  Follow this document to reconfigure the printer via the wireless network.
  Set up your printer for a wireless network for the HP LaserJet Pro P1102w printer.
  Under OS X v10.10 Yosemite, OS X v10.9 Mavericks and OS X Lion mountain v10.8 Select method three: using a USB wireless setup.

  If you are still having problems loading of HTML, update the firmware of the printer configuration Page.

  Unfortunately, there is not one available currently to 10.10, but if you have 10.9 or less or a Windows computer, you can update the firmware in this way.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If you're still having problems, please let me know. Thank you.

• Paper jam false error HP LaserJet Pro P1102w printer

  Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

  I would be grateful for any help

  Thank you

  Ron Barker

  Hi @RonBarker ,

  I see that you have problems printing of envelopes. I will definitely do my best to help you.

  The Word software, to change the auto power.

  When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

  In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

  

  If you need help, let me know.

  Have a great day!
  Thank you.

• P1102w printer is not "readable by this computer.

  Hello

  I used my laserjet P1102w printer with my macbook pro for about two years, using a USB connection.

  I've never had real problems with the printer and it was working fine with my macbook last Thursday night. I tried to print something on Sunday night but when I plug the printer by USB my computer flashes just a window that says "the disk you inserted was not readable by this computer." He refuses to print all documents and does not appear on the computer at all. I tried to reset all settings for printing on the laptop, but the printer does not always appear. I use Mac OS 10.9.5. I had not brought no changes to software over the weekend I would have thought this would cause.

  I am a student and really need my printer working again as soon as possible. Can someone help me with this problem? I can't think what else to do.

  Thank you, Stephen.

  Hi @SJRamsay11,.

  I see by your post when you connect the USB cable to the Mac you get the message "the disk you inserted is not readable by this computer. I can help you with this.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, restart the Mac, and then connect the USB to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  There are two ways that we can disable it.

  Print a configuration page. Printing a Configuration Page.
  Select the method two.

  If the printer has a IPV4 address or the Direct wireless is under tension and indicating an IP address, you can access: the printer Web server integrated and disable the Smart Install from there.

  If you have a valid IP address, type the IP address in the Safari browser to bring up the printer built-in Web server and you can disable the Smart installed on the printer.

  If it does not, you will need to disable the Smart Install the printer on a Windows computer.

  On the Windows computer, go to start, computer, right click the printer CD
  and left click Open in a new window, go to Smart Install utility util/siutility.exe/HP.
  printer or PC - printer select / click on disable.

  Let me know how make you out.

  Good day!
  Thank you.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• Office 2011 and compatibility printing El Capitan

  I'm like El Capitan, but late last night, I tried to print a Word document for the first time since Windows Office 2011 and had problems - spinning beachball and then the paper closed.  A notice of 'error' came.  I couldn't print on the trendy hp1400 or the Deskjet wireless.  My wife has been able to print a focus on my hp1400.  We have 2 printers - a 1400 hp and a series of J611 Deskjet 3050 wireless [OCDFAE]. (MacBook Pro early 2011) 16 GB 1333 MHZ DDR3 OS X El Capitan 10.11.5 version) I've seen other reports of the same problem but have not found the solution.

  More of the puzzle.  My wife also has a MacBook Pro with Office 2011 - Siena had the faulty motherboard which had to be replaced a year ago.  It has updated to El Capitan and can print on the wireless.

  Contact Ms., Office 2011 prints normally (in general), when its not its a MS problem

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.