WPC54Gv2 under Windows 98 - can't get the IP address on the network WEP?

Hello

I installed a WPC54G v2 adapter in a laptop running windows 98. I connected to work at a WPA network without problem. I came home and I tried to connect to the network, but you can't get an ip address.

I know that the network has a WEP 64-bit password (I connected fine from another computer so I know that I have the right password). I compared the WEP key that the linksys client uses with the key in my router settings and they match. I can see the MAC address of the laptop as wireless to my router and linksys customer relationships it is connected to the router, but cannot connect to the internet.

I tried assigning a manual ip address and using the automatic ip address with no luck. Any help or ideas are greatly appreciated.

Thank you

Advertisement

I think that I may have been too far from the access point to connect. I tried again today from another place and I am now connected. Thanks for the suggestions.

Tags: Linksys Adapters

Similar Questions

  • How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    Use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Go to method 3.

    3. for the network icon.

    (B) to activate the icon network - Enable_Network.reg< click="" to="">

    * Don't forget to restart to complete the procedure. ***

  • Windows 7 can not find the network

    Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

    Hi Kate,.

    Thanks for posting your query in Microsoft Community.

    I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

    • Restoring the system led?
    • What exactly happens when you try to connect to the Wi - Fi?

    This could be due to several reasons, including any third party software conflict. Try the following methods and check.

    Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

    Step 1: Start the computer using safe mode with networking

    Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

    Please refer to: , start your computer in safe mode

    Step 2: Perform a clean boot in order to avoid any conflict of third party software.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    Method 2: Update the network adapter

    Step 1: Update the driver through Device Manager

    a. click Start , type Device Manager and click on it

    b. expand network adapters

    c. make a right click driver, and then click Update driver software

    Step 2: Install the Windows updates pending

    To check the updates:

    1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.
    2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

    3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

    4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

    5. Click install updates.

      Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

    Additional information:

    Wireless and wired network problems

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Windows 7 can not get the fingerprint reader to show

    I have a T500 I removed Vista and installed Windows 7.   But now I can't the fingerprint reader will be displayed at sign in.   I think that I have installed the driver, but it does not appear.   I went into Device Manager and it seems to be responsible.   Any ideas?

    You need not fingerprint software from Lenovo. It's just another program that is running in the background.

    Windows 7 has all the functions that the software Lenovo offers. Whether you use it or not, it's up to you.

    in any case, to get the fingerprint logon to work, you must go into control panel > biometrics. Then you need to check "Allow connections to fingerprints" (or something of the sort). It will ask you to register to use fingers.

    The next time you start your computer/log, you will be asked to use your fingerprint to log. It works exactly as it would if the Lenovo program was there (with the sole exception of the sliding-finger-to-boot-computer functionality).

  • Reinstalled Windows and can not get the video past standard vga

    I had to reformat my hard drive on my Studio 1749 and reinstall it from the disk operating system (which seems to have only the standard drivers on that).  Then, I went to the page of Support for drivers and installed the wireless lan driver and video driver.  But when I try to adjust the screen resolution, the only option for display is generic pnp monitor on standard vga adapter.  How can I get that back at the higher resolution and it supports?

    Thank you

    Dan

    First thing to do is determine whether you have an Intel or ATI video (BIOS - F2 at startup screen - will tell you).

    Make sure that you have installed the Dell system software

    www.Dell.com/.../Studio-1749

    Then install the video driver.

  • Sony VAIO Windows 7 can not get the most recent updates

    I have a Sony VAIO - VGN - Windows 7 and I can't seem to get 2 errors updates received up to this most recent need help in simple English please because. I am not computer savy and have spent more than 2 hours (really) trying to get windows answers continue to send from one place to the other. So far, I received 3 error 80080008-codes-50597-80070652 trying to get answers please help.

    Try the new June included in this update rollup, update client

    https://support.Microsoft.com/en-us/KB/3161647

    Main download page,

    https://support.Microsoft.com/en-us/KB/3161608

    Win-7 32-bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

    Win-7 64-bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

    Don't forget to change your windows update settings to never check the updates, and then restart the computer before installing.

  • Windows 7 can not get the KB971033 update to install

    CAN'T UPDATE KB971033

    Have you tried to download and install it manually? You can download it from http://www.microsoft.com/downloads.

    If its an update optional, you can hide and ignore it:

    Hide the Windows 7 updates that you don ' t Want never to install
    http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

    How to hide updates or restore the hidden in Windows Vista updates
    http://www.itechtalk.com/thread5013.html

    The problems with the installation of the updates:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    If it is a critical update, what you could do is to wait for Windows 7 Service Pack 1 was released on February 22, 2011, it could be included in this update.

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • network not working not after you have reinstalled Windows, where can I get the drivers?

    I reinstalled windows xp professional service pack 2 on my HP and do not think that all the drivers downloaded bc I can't connect to internet or fix ip address.

    I have a hp and dell. I went back two of them to the original os. I have the discks for each of them. However, the dell has a disc to reload the drivers. All I have with the CV is the operating system, Documentation CD and CD of Diagnostics and restore hp more cd. I put restore plus CD first, then reloaded the operating system. I don't think that all drivers have been downloaded because I can not connect to internet. Any help with this?

    Please visit HP Support & software, enter your computer HP model number and click search for drivers Windows XP download.

  • When changing the windows, how can I get the next window full screen?

    I double click on my ebay icon, it opens in a window that is minamised. How can I configure it to mount the best?

    Try this:

    Open it shortcut-> close all other windows internet Explorer-> drag the edges of the window to fill the entire screen-> close the window by holding the 'alt' key and clicking on the button close at the top right of the window (red with white "x" button), the next time that you open, you should remember its size when it was closed.

    I hope I could help

  • I lost my product key of window how can I get the key to product again

    I bought Windows vista through the internetfrom microsoft I need to restart the system and I have lost the key ptoduct. can you help me

    http://www.magicaljellybean.com/KeyFinder/

    If your Vista is still running and active, use the program above to find your product key.

    See you soon. Mick Murphy - Microsoft partner

  • 10 Windows Installer can't get the computer to connect the printer to the 8600-eAIO N911g.

    Download new drivers but always says printer not connected, is not serious if I'm crocheting via usb or wireless.

    Hello

    Thank you for reporting the issue.

    If you encounter printing problems as printer is offline, no print job, print go, no printer found, analyze issues etc,

    You can download the HP Print Scan from the HP website doctor. It will diagnose and fix the problem for you.

    Here is the link
    http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E013-1&h_keyword=DG-NDU

    If you want to know what he can do... read the document here
    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03286146

    Good impression

  • I have a windows vista Home premium and want to connect to a network that is set up on a workstation after running windows 7 can not find the network why?

    Why my computer running windows, find a different network than the vista of cant

    If collective housing is installed on the Windows 7 computer, only Windows 7 computers can join a home group.

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Networking of computers running different versions of Windows

    This article describes how to configure files and printers, sharing on a home network with computers running different versions of windows.

    See you soon.

    Mick Murphy - Microsoft partner

  • Can't get the Time Capsule network to see Airport Extreme?

    I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

    Any ideas would be very useful.

    The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

    First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

    If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.

  • I can't get the first CS5 for import running under Windows 10 .mov files.  MOV files will play on Windows 10 direcstly

    I can't get the first CS5 for import running under Windows 10 .mov files.  MOV files will play on Windows 10 direcstly.  Can anyone help?  I tried quicktime player loading but it will not work with Windowws 10

    You need to find an older version of Quicktime, from Apple, to be able to install on Win10

  • I can't get the tabs of the previous session of the return when I reopen it Firefox. The header of the window, or 'Quit' in the file Menu using 'Close' of Firefox not working. Note that "Restoration of previous Session" on my Menu history is grayed out so

    Question
    I can't get the tabs of the previous session of the return when I reopen it Firefox. I tried closing with 'Close' header of Firefox window, but also 'Quit' in the file Menu. Note that "Restoration of previous Session" on my Menu history is grayed out so I can't use it. In addition, there is no tab at the top of my window to open Firefox Firefox - only a menu bar that shows "File", "Edit", "View", "History", "Favorites", "Tools" and "Help". I am running Windows 7 Home Professional and Firefox 4.01

    "I can't do the tabs from the previous session of the return when I reopen it Firefox.

    Remember that you are not private browsing or they are in permanent private browsing mode. See: https://support.mozilla.com/en-US/kb/Private%20Browsing (2nd and 3rd options menu on this page)

    Make sure that you are not clearing history during a session or when Firefox is closed. See:

    • Clear recent history: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    • Clear history of Firefox closing: uncheck 'Clear history of Firefox closing' options > Privacy panel (the first item under "History" on this Panel should be set on "Firefox will be: use the custom settings for history" to see that point to uncheck)

    "There is no Firefox tab at the top of my Firefox window open - only a menu bar.

    The Firefox button is supposed to be on by default in Vista and Windows 7.

    In Firefox 4, you have the choice of using the Firefox (orange or grey) button in the upper left or the menu bar (File, Edit, View, history, Favorites, tools.) Help).

    • The selections on the Firefox button are distinguished by the menu bar options.
    • You can easily switch between the Menu bar and the Firefox button or leave one or the other active.
    • One used depends on if the Menu bar is enabled
      • Bar menu checked = Bar Menu on, Firefox off button
      • Bar menu unchecked = Menu Bar off, Firefox button on

    When the Firefox button appears and you want to temporarily view and use the menu bar, press ALT or F10 displays the menu bar and you can make your selections in the Menu bar displayed temporarily.

    To check (or uncheck) the menu bar, do one of the following:

    • using the Firefox button: click on the Firefox button > Options > Menu bar
    • using the Menu bar: click on view > toolbars > Menu bar
    • Hold DOWN the ALT key while pressing the VTM keyboard letters

Maybe you are looking for

  • graphic recording as image?

    Is there a way to save scatterGraph xy in .net as a image such as tiff file? Thanks in advance.

  • need to update the value of the column automatically (exists and the new value)

    Hello(1) I Segment1, Segment2, Segment3, Segment4, item_status (new column modified in the Temp table)Must update the form OFA and the DB Temp table item_status value in the column when I click APPLY to SAVE the Inserted records in the DB table and f

  • sign up with 2 images in DC

    How can I register pdf in acrobat reader dc using 2 images of signatujre separate?

  • Direct link to Adobe SpeedGrade disconnects

    I have a PP CC project that contains some PSD files for titles.When I use the 'Direct to Adobe SpeedGrade link' (CC) and back to PP these clips are to be replaced by the chart in offline media.If I repath the PSD is the same thing whenever I use the

  • Identifier of the Union auto-trait

    HelloIf we have a special character to find the auto-trait of Union for the end of line?If (myFound [i] .lines [0] [-1] .characters .silence == "special for Union auto-trait character")


HashFlare