WPC54GX not install on Windows 2000 laptop
I installed Windows 2000 on a Dell Latitude's older (too slow for XP that was on it). The WPC54GX worked fine on XP, but I could not install the drivers for Win2k. Set him driver and Windows it is when I plug in the adapter, but the plateau of Linksys monitor shows in the status bar - just the icon of windows network standard that displays "network cable unplugged". I can't find where the installed WIFI monitor anywhere on the hard drive.
I tried all the stuff I know & I'm stumped on this one. I'd appreciate any help I can get!
To install the adapter Linksys on Windows 2000, you can follow this link
You can also see Related Articles below on the link... See if that helps...
Tags: Linksys Adapters
Similar Questions
-
Shockwave Flash update will not install on Windows 2000 SP4?
Does anyone else have this problem? It downloads quite well, but is not installed because of the following error: "the procedure point SetDllDirectoryW entry is not found in the KERNEL32.dll dynamic link library."
This is for Adobe Flash 11.2.202.235. The previous (current) version was apparently discovered to not be is not so sure.
Windows 2000 is no longer supported in current versions of Flash 11.
It seems that Flash Player 10.1.102.64 is the last version for Windows 2000
-
printer virtual (ThinPrint) do not install on Windows 2000 comments
Does anyone have virtual print (ThinPrint) running for a guest W2K?
I refer to the version of ThinPrint that comes with the drive.
I can't seem to get installed it.
I use VMWare Player 12.1.0 - 3272444 and VMWare tools 10.0.5.520 and attempted a "Typical" VMWare Tools installation on a W2K guest under a host of Intel 64 - bit Windows 10. I used the admin on both sides. The guest of W2K has disabled UAC and is always admin.
During installation, I received the following error dialog:
RUNDLL
Error loading tpvmmon.dll
the specified procedure is found not
The printer user interface
Printer rundll command failed.
Command: /ia /f "C:\Program Files\Common Files\VMWare\Drivers
\Virtual Printer\TPOG3\OEMPRINT. INF' / r ' THIRD: "/m «TP release»»»
Gateway"/h"Intel"/v"Windows 2000 ".
Was asked to OK the absence of signatures on the stuff of ThinPrint. After that the VMWare Tools installed I have restarted the prompt.
The following log files resulted in the prompt:
c:\Documents and Settings\All Users\Application Data\VMWare\Logs
vminst.log_20160329_080638.log
vmmsi.log_20160329_080638.log
c:\WINNT\Temp\vmware-vmsvc.log
c:\WINNT\Temp\vmware-vmusr.log
Things that I found disturbing in the vminst.log_2016...
2016-03-29 07:50:43 | tools-build-3228253 | Attempt to launch "rundll32 tpvmmon.dll, InstHelper install - q."
2016-03-29 07:50:51 | tools-build-3228253 | Child came out with code 0
The above command is probably what caused the first error dialog box during installation, but it's not really report this error to the
install the program. If I try the command to the admin command prompt I get the same error 'procedure cannot be found.
I used a dumper of export in the dll and the entry point is actually spelled InstHelperW. I tried with the extra W on the command
online, but I got the same thing.
2016-03-29 07:57:31 | tools-build-3228253 | Attempt to launch "install"C:\Program VMware Tools\TPAutoConnSvc.exe"- q-".
2016-03-29 07:57:31 | tools-build-3228253 | Create process failed: error 193
2016-03-29 07:57:31 | tools-build-3228253 | Attempt to launch "install"C:\Program VMware Tools\TPVCGateway.exe"- q-".
2016-03-29 07:57:31 | tools-build-3228253 | Create process failed: error 193
Try the above commands, a command admin line causes "not a Win32 application valid."
Things that I found disturbing in the vmware - vmsvc.log...
[Mar 29 07:58:02.953] [Warning] [vmtoolsd] Plugin 'guestInfo.dll' has no opening: 'C:\Program VMware Tools\plugins\vmsvc\guestInfo.dll': the specified procedure could not be found...
...
[Mar 29 08:06:39.757] [critical] [Glib] file...... \.. \glib\gmain.c: line 2849: assertion ' loop! = NULL' failed
I tried to install the printer via the Add-a-Assistant printer. ThinPrint is present in the list of printers. I give COM1:, etc., but in the end is just says "failed".
I if "install" from the context menu of the OEMPRINT. The system INF flashes just to me. No dialog box. No errors. No printer.
The only thing left to try is to create a new VM W2K and see if the problem persists. I'll post back with the results.
Dear diary, I ended up coming back to VMWare Player 7... and printing, I'm happy to report. I'm not sure whether the installed printer drivers are product of ThinPrint. That they are not listed as such. But the VMWare tools install break thru without a hitch and I my print feature back.
Remind you it's easier said than done. Here's the problem: VMWare Player 7 is still available for download from VMWare, but after install you it and it phones home page for VMWare tools, it always indicates that the update server is not responding. According to the Wiki for VMWare Player, version 7 is no longer supported.
So how do you get the tools?
I tried to download the tools. TAR that VMWare offers, I believe than version9 dot something. I had to find a way to decompress. (That Windows uses. TRE?) Then I had to make one. ISO to it so that I could mount it and present it to the player. But it did not work. He ran quickly and completely in silence and produces newspapers, but I couldn't figure out why she did nothing. I have to admit that I do not exactly trying to decipher the newspapers set up.
So on to plan B, ugh: I downloaded the demo of VMWare Workstation 7 Pro, installed, saved the windows.iso that accompanies it, uninstalled, reinstalled VMWare Player 7, put the windows.iso in the root of VMWare Player installation on the host computer, modified my version 7 W2K VM settings so that my virtrual DVD player had the ISO mounted, booted up the virtual machine then I started the installation (setup.exe) tools of the virtual DVD. (You mind, making a Manage / reinstall VMWare Tools will just try to shout to the update servers and fail.)
So I'll never be able to update the VMWare Tools, but it's OK because everything seems to be working. I will make just a point to save this windows.iso so I don't ever have to be in this position again.
Just for the record, my exact versions are: VMWare Player 7.1.3 build 3206955 and VMWare Tools 8.4.9.30422. The version of the tools is the one shipped with VMWare Workstation Pro 7.1.6 build 744570.
So I guess it's just a case of VMWare takes a step backward on W2K. Maybe they will fix it in the future. Of course I'm probably one of only a handful of people still need run W2K, so I won't hold my breath.
Thanks, Continuum, to try to help.
-
Just installed VMware player 5.0.0 on a host windows 7 to run a guest OS for win2k. Going to install VMware tools, the installation program starts as expected but gives the error dialog box, ' the installer could not upgrade windows install "and closes. How can I install VMware tools?
See attached screenshot.
Thanks in advance.
Service Pack installed inside the 2 k VM?
AFAIK the installer needs to SP 4
-
1670 CDS satellite - modem does not work on Windows 2000
Hi-
I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).
I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is
The port looks ok. Please advise - is it the right driver?
Thank you.
A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.
I have checked the Toshiba site but your model no available Windows 2000 driver exists.
I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.Good luck!
-
Works Suite 2003 will not install on windows 7. compatibility issue?
Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.
I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?
Hello
· Which edition of Windows 7 you are using?
Works Suite 2003 is not compatible with Windows 7. Click on the link below.
You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.
Apart from this, you can install the program in compatibility mode and check if it works or not.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
See the article mentioned below for the minimum system requirements for the continuation of the work 2003.
Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003
http://support.Microsoft.com/kb/331105
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista
HP Deskjet 1056 will not install on Windows Vista
Hello
Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&
-
KB973688 and KB954430 do not install. Windows Update tries to install these two updates, but they never complete the installation. Tried to install KB954430 manually, but it would not install. Event Viewer event id 7023 windows module Installer service ended. Dialog box shows HRESULT:0x800736FD {7B30B69B-036c-b7e0-a06b-d6b9abf34537}. KB973688 would not install either. Tried rebooting, shutdown windows update, so I could install by hand. No updates will be installed. Help, please.
This question always took place or simply with KB973688 and KB954430?
Have you tried manually download and install updates?
Have you read the known issues with this security update of the section of KB954430 and try the steps recommended?Suggest you download and Save KB954430 first . Since you did not specify if the system is 32 or 64 bit.
If you are not sure which architecture is the system, open System in Control Panel.
Look next to system type under law to see whose architecture is the system.KB954430 for Windows 7
Windows 7 for 32-bit systems
Windows 7 for x 64 systemsOnce the download is complete to read this and configure the system to boot .
Start in what is called a State of cleanliness will ensure that Sophos and printing software (including HP print software) does not interfere with the installation of the update.
Once you have started own the system, right-click the update registered and choose 'Run as administrator' .
Accept guests UAC to allow the update to install.
Reboot the system after installation.Is he being always reaffirmed or just KB973688 be already now?
If KB973688 is the only be reaffirmed, install now while the system is still in the clean boot State.
That bring them both installed?Cancel the clean boot procedure as set out in the KB article , they have or they do not have and please post back with your results.
MowGreen Services consumer safety update -
KB976569 will not install in Windows xp, error OX66A HELP
KB976569 will not install in Windows xp, error OX66A HELP
Rick
Hello
Follow the instructions in the link:
Codes error '0x8007066A' or '66' was to occur when you install updates of .NET Framework
http://support.Microsoft.com/kb/2507641/en-us
I hope this helps.
-
updtes does not install on windows xp home edition 2002 service pack 2
Hello
After formatting window updtes do not install on windows xp home edition 2002 service pack 2
Rabindra Nath Nandi
HOW TO get a computer that is running Windows XP SP1 (a) or install SP2 fully patched after a cleaning
https://groups.Google.com/Forum/?fromgroups#! msg/microsoft.public.windowsxp.general/quMfqk8Eb94/K93XrUGuZqAJVERY IMPORTANT! => Step #4 links above, making resolution method #2 (No method no. 1) on this page: http://support.microsoft.com/kb/943144
Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029
-
HP Photosmart D110 printer will not install with Windows Vista?
HP Photosmart D110 printer will not install with Windows Vista?Hello
(1) what happens when you try to install the printer?
(2) you get an error message?
Method 1: You can run the fixit available in the link below and check to see if that makes a difference
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/
You might want to know
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing. Whenever I try to install the windows phone recovery tool it does not install error
0 x 80070003, system can't find the path or 0x800b0101, hash value is missing... Please help
Hi Imran,
Thanks for posting the query on Microsoft Community.
I'm sorry to know that you can not install Windows Phone on Windows 7 recovery tool. The problem could be due to system files or software problem.
Try to solve the problem by following the methods below.
Method 1
Try to run the patch from the link below and check if it helps.
Error code 0 x 80070003 when a preference of group policy is applied on Windows 7 clients:
http://support.Microsoft.com/kb/2904034
If the problem persists, then go to method 2.
Method 2
Refer to suggestions provided by Vijay B responded on December 22, 2009.
I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.
-
DeskJet F2110 will not install in Windows 7.
My F2110, all-in-One, will not install in Windows 7. Error message says will not be installed with the current operating system. I switched from Windows XP to win7, now my installation disc will not load in win7. The F2110 won't work with Win7 or Win8, only older operating systems?
Hello, welcome to the Forums! I hope you enjoy your experience
I saw your post on the question of facilities that you are experiencing with the use of the disc. There are downloadable drivers available for Windows 7 and Windows 8. The link is below for you!
HP Deskjet F2110 all-in-one printer drivers
I hope that this post has helped you!
Thanks for posting and have a great day!
-
ThrustMaster Top Gun Fox 2 Pro do not install under Windows 7 64-bit
I have a Thrustmaster Top Gun Fox 2 Pro and it will not install in Windows 7 64 bit, Windows reports it cannot find a driver. The manufacturer says not all newer than Windows XP drivers.
I thought about it:
- Download ftp://ftp.thrustmaster.com/accessories/pc/hotas/exe/HOTASCOUGAR/2007_HCO_VISTA_64_RC1.exe (Vista for their Cougar Joystick driver)
- Make a click on the file and choose Run as Vista Sp2 compat mode and run as admin.
- Run the installation program and the joystick connection when you are invited (and installed).
- End task on the Setup (it is always waiting for the cougar to be plugged).
- Enjoy!
-
Trust keyboard and aula befire keyboard elight will not install on windows 7 help
TRUST KEYBOARD ELIGHT AND AULA BEFIRE ARE TWO PLUG-AND-PLAY BUT WILL NOT INSTALL ON WINDOWS 7
Hello
1. do you receive an error message or error code?
2 have you made changes on the computer before this problem?
3 is the issue limited only when connecting keyboards?
This problem may occur because of drivers are not installed properly.
Try the following and see if it helps.
Method 1:
Try connecting to another USB port and check if it is detected, or try to connect to another computer.
Method 2:
Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us Note: I recommend to install the drivers for the keyboard and check if it helps.
Method 3:
Remove and reinstall all USB controllers.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Keep us updated on the status of the issue.
Maybe you are looking for
-
[SOLVED] How can I increase the height of the tabs?
I was using a theme that has increased the height of the tabs. Unfortunately, the theme was in conflict with the menu tab setting using the TabMixPlus extension. I'm stuck with the theme by default or others who do not increase the size of the tab. I
-
Satellite P15-S409: is it possible to upgrade the processor?
Hello, I have a Toshiba P15-S409 I would like to know if the CPU can be upgraded. What socket t - it support and Max speed value?. How can I find the specifications. Thanks in advance.
-
USING Windows Update, error 0 x 80070103!
This same error pops up every time I have to install the updates. And it's always a driver. Each time it messes up my computer, the internet; When I click on solve problems when internet does not work it says it's a DNS server that is trying to conn
-
/ Applications/Adobe Premiere Pro CC/Presets
I can not find this folder to install download functional content for title presets... Please help!I use first Pro CC 10.4