WRE54G V3 - Web: gateway no response

I configured my WRE54G, following the instructions and moved in my living room and confirmed that the link linght has turned blue.  Since my iPhone wif' are and my Nokia N97, we now see a signal of 100%, up from 45 percent before installing the expander control.

However, every time we try to connect to the internet using a phone, we our using Wii or PS3 wireless gat error messages various mainlyWeb: front door unanswered.

My router is a router Dlink ADLS2 + (DSL-G624M), the SSID is hidden, secrurity is set to WPA TKIP.  I havesouble checked on the WRE54G the IP of my router (192.168.1.1, subnet 255.255.255.0) is defined as the door, the SSID is my existing network, the channel corresponds to my existing network.

Any ideas what I should do to get this work, or access of all newspapers etc. to determine exactly what is the issue?

You must make sure that the default IP of your Range Expander is 192.168.1.240, subnet mask: 255.255.255.0 default gateway: 192.168.1.1 (Router)...

Also, you should do a full power cycle-

Unplug the power cable from the amplifier, wait 30 seconds, unplug the power cable from the router, wait 30 seconds, connect the power cable to your amplifier, wait 30 seconds and connect the power cable to your router...

If this does not work, you need to change the Security Wireless WEP on both devices and then perform the power cycle... It should work... If you want to use WPA-TKIP you must ensure your amplifier and your router are updated to their latest firmware...

Tags: Linksys Products

Similar Questions

  • 0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"

    0xc0000005
    Recent problems with my Lexmark X 7675.  After printing, I get an error message that says:

    Lexmark Web gateway has encountered a problem and needs to close.

    I think it's a problem with the latest Windows updates.  I use XP SP3 and that you have not seen this problem until this last week.

    Find C:\WINDOWS\system32\spool\drivers\w32x86\3\lxdwwbgw.exe and delete or rename it so that it does not work.

    This program sends just the stats of the printer for Lexmark.

  • Question about web gateways OAM and load balencie interaction.

    Must before the web gateway load balancing OAM maintain sessions?

    The platform is Microsoft Windows Server 2003 R2.

    Any comment is appreciated.

    When the user authenticates OAM defines the obSSOcookie that contains all the details of this user's session. If a user accesses ANY webgate configured for SINGLE sign-on in this area, no new authentication is required. The Webgate knows the user identity based on the details of the obSSOCookie, and authorization rules OAM for this domain policy kick in. This occurs regardless of any load balancer hardware or backend even application. Therefore, you load balancing should not be configured for the post-it, just for the Webgate and SSO sessions. An important consideration is that your load balancing program is setup for NAT or not. This will affect the IPValidation parameter. If the NAT is used, then you must turn off IPValidation, or use an exception IPValidation for the VIP on the load balancer.

  • Web Inspector: Unexpected response Code: 426

    Hello

    I'm trying to debug my application in Blackberry OS 7 Simulator. The Web Inspector is started and I can join my app. But after I clicked on the page I want to debug, all controls in the bar above (console, network,...) are suppressed.

    Debugger for chrome with attached message responses. I tried Safar with the same result. IE and Firefox are not yet able to show almost complete page.

    any idea?

    Best regards

    Was the only browser it works with Safari 5.x not 4.x as I've tested before.

  • Web services - handling response type complex

    I have to consume a web service that returns an array of complex type.
    The wsdl looks like below:
    Request: POST /UserManager/usermanager.asmx HTTP/1.1
    < soap: Body >
    "" < GetMargins xmlns = " http://tempuri.org/ ' / >
    < / soap: Body >

    Response: HTTP/1.1 200 OK
    < soap: Body >
    "< GetMarginsResponse xmlns =" http://tempuri.org/ "> "
    < GetMarginsResult >
    < String > < / string >
    < String > < / string >
    < / GetMarginsResult >
    < / GetMarginsResponse >
    < / soap: Body >
    --------
    The service is currently in my local network. If I call the service with the code below:
    < cfinvoke
    WebService = "" http://oecdevel/usermanager/usermanager.asmx?wsdl " "
    method = "GetMargins.
    returnVariable = "stGetMarginsResponse" >
    < cfscript >
    I get the answer: org.tempuri.ArrayOfString@465545dd
    I tried to create a struct, etc, but I had no luck at all.
    How can I read the answer? Help, please. Thanks in advance.

    The answer is an instance of a java object - ArrayOfString. I suggest you start using cfdump on it. That lists the properties and methods of your response object. I suspect you will see 2 methods, writing and getString (int i). So, if you call stGetMarginsResponse.getString (), you should have an array of returned simple strings that you can run a loop through. Or you can call stGetMarginsResponse.getString (i), where i is 0 to arraylen to get a specific element in the table.

    Let us know your results. Also, if you view the WSDL file I'll look in there far longer.

  • Could not get the native web service response to Oracle using a PL/SQL &lt; Message &gt; function &lt;! [CDATA [component "WS_CALC" must be said]] &gt; &lt; / Message &gt;

    Hi, we have a problem with oracle native web service access using a PL/SQL function. We are running out of ideas how to solve the problem. Someone would be so nice to take a look at our case. Thank you much in advance. Best regards, Smiljana

    CREATE TABLE for_web_info (some_hello_text VARCHAR2 (150), when_inserted DATE, we_are_from VARCHAR2 (30));

    INSERT INTO for_web_info VALUES ('HI everyone :-) ', SYSDATE, 'Ljubljana, Slovenia');

    CREATE OR REPLACE

    PACKAGE ws_calc AUTHID CURRENT_USER AS

    FUNCTION CalcProduct (a NUMBER by DEFAULT 1,

    b in on NUMBER,

    g NUMBER of OUTPUT)

    RETURN NUMBER;

    END ws_calc;

    /

    CREATE OR REPLACE

    PACKAGE ws_calc AS BODY

    FUNCTION CalcProduct (a NUMBER by DEFAULT 1,

    b in on NUMBER,

    g NUMBER of OUTPUT)

    RETURN NUMBER IS

    product NUMBER;

    BEGIN

    SELECT SUM (1) IN the for_web_info OF g;

    product: = a * b;

    RETURN any product;

    END;

    END;

    /

    Our two DBA done all the steps described in the manual Oracle® XML DB's Guide Developer, 11 g Release 2 (11.2), E23094-04, February 2014, section using Oracle DB native XML Web Services.

    Access us two wsdl with browser without problem and get two of them. We also receive web serivce response which databese of query table.

    http://our_db:8080 / orawsv? WSDL

    http://our_db:8080 / orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT? WSDL

    ---------------

    | First WSDL.

    ---------------

    <? XML version = "1.0"? >

    " < name definitions = targetNamespace"orawsv"=" http://xmlns.Oracle.com/orawsv "" "

    " xmlns =" http://schemas.xmlsoap.org/wsdl/ "

    ' xmlns:tns = ' http://xmlns.Oracle.com/orawsv "" "

    ' xmlns:soap = ' http://schemas.xmlsoap.org/WSDL/SOAP/ "

    " container = ' http://www.w3.org/2001/XMLSchema "

    " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

    " xsi: schemaLocation =" http://schemas.xmlsoap.org/wsdl/ http://schemas.xmlsoap.org/wsdl/"> ".

    < types >

    < xsd: Schema

    " targetNamespace = ' http://xmlns.Oracle.com/orawsv "" "

    elementFormDefault = "qualified" >

    < xsd: element name = "query" >

    < xsd: complexType >

    < xsd: SEQUENCE >

    < xsd: element name = "DDL_text" type = "xsd: String".

    minOccurs = "0" maxOccurs = "unbounded" / >

    < xsd: element name = 'query_text' >

    < xsd: complexType >

    < xsd:simpleContent >

    < xsd:extension base = "XSD: String" >

    < xsd: attribute name = "type" >

    < xsd:simpleType >

    < xsd:restriction base = "xsd:NMTOKEN" >

    < value xsd: Enumeration = "SQL" / >

    < value xsd: Enumeration = "XQUERY" / >

    < / xsd:restriction >

    < / xsd:simpleType >

    < / xsd: attribute >

    < / xsd:extension >

    < / xsd:simpleContent >

    < / xsd: complexType >

    < / xsd: element >

    < xsd: Choice minOccurs = "0" maxOccurs = "unbounded" >

    < xsd: element name = "bind" >

    < xsd: complexType >

    < xsd:simpleContent >

    < xsd:extension base = "XSD: String" >

    < xsd: attribute name = "name" type = "xsd: String" / >

    < / xsd:extension >

    < / xsd:simpleContent >

    < / xsd: complexType >

    < / xsd: element >

    < xsd: element name = "bindXML" >

    < xsd: complexType >

    < xsd: SEQUENCE >

    < xsd: all / >

    < / xsd: SEQUENCE >

    < / xsd: complexType >

    < / xsd: element >

    < / xsd: Choice >

    < xsd: element name = "null_handling" minOccurs = "0" >

    < xsd:simpleType >

    < xsd:restriction base = "xsd:NMTOKEN" >

    < value xsd: Enumeration = "DROP_NULLS" / >

    < value xsd: Enumeration = "NULL_ATTR" / >

    < value xsd: Enumeration = "EMPTY_TAG" / >

    < / xsd:restriction >

    < / xsd:simpleType >

    < / xsd: element >

    < xsd: element name = "max_rows" type = "positiveInteger" minOccurs = "0" / >

    < xsd: element name = "skip_rows" type = "positiveInteger" minOccurs = "0" / >

    < xsd: element name = "pretty_print" type = "xsd: Boolean" minOccurs = "0" / >

    < xsd: element name = "indentation_width" type = "positiveInteger" minOccurs = "0" / >

    < xsd: element name = "rowset_tag" type = "xsd: String" minOccurs = "0" / >

    < xsd: element name = "row_tag" type = "xsd: String" minOccurs = "0" / >

    < xsd: element name = "item_tags_for_coll" type = "xsd: Boolean" minOccurs = "0" / >

    < / xsd: SEQUENCE >

    < / xsd: complexType >

    < / xsd: element >

    < xsd: element name = "queryOut" >

    < xsd: complexType >

    < xsd: SEQUENCE >

    < xsd: all / >

    < / xsd: SEQUENCE >

    < / xsd: complexType >

    < / xsd: element >

    < / xsd: Schema >

    < / types >

    < name of message = "QueryInput" >

    < name of part = element "body" = "tns:query" / >

    < / message >

    < name of the message 'XMLOutput' = >

    < name of part = element "body" = "tns:queryOut" / >

    < / message >

    < portType name = "ORAWSVPortType" >

    < operation name = "XMLFromQuery" >

    < input message = "tns:QueryInput" / >

    < output message = "tns:XMLOutput" / >

    < / operation >

    < / portType >

    < connection name = "ORAWSVBinding" type = "tns:ORAWSVPortType" >

    " < style: soap = transport = 'document' binding ' http://schemas.xmlsoap.org/SOAP/HTTP "/>

    < operation name = "XMLFromQuery" >

    " < soap: operation soapAction = ' http://our_db:8080 / orawsv "/>

    < input >

    < use of soap: body = "literal" / >

    < / Entry >

    < output >

    < use of soap: body = "literal" / >

    < / output >

    < / operation >

    < / binding >

    < service name = "ORAWSVService" >

    < documentation > Oracle Web Service < / documentation >

    < name of port = "ORAWSVPort" binding = "tns:ORAWSVBinding" >

    " < soap: address location = ' http://our_db:8080 / orawsv "/>

    < / port >

    < / service >

    < / definitions >

    ----------------

    | Second WSDL.

    ----------------

    <? XML version = "1.0"? >

    < name of definitions = "CALCPRODUCT."

    " targetNamespace = ' http://xmlns.Oracle.com/orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT "" "

    " xmlns =" http://schemas.xmlsoap.org/wsdl/ "

    ' xmlns:tns = ' http://xmlns.Oracle.com/orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT "" "

    " container = ' http://www.w3.org/2001/XMLSchema "

    ' xmlns:soap = ' http://schemas.xmlsoap.org/WSDL/SOAP/ ">

    < types >

    " < xsd: Schema targetNamespace = ' http://xmlns.Oracle.com/orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT "" "

    elementFormDefault = "qualified" >

    < xsd: element name = "SNUMBER-CALCPRODUCTInput" >

    < xsd: complexType >

    < xsd: SEQUENCE >

    < xsd: element name = "G-NUMBER-OUT" >

    < xsd: complexType / >

    < / xsd: element >

    < xsd: element name = "B-NUMBER-INOUT" type = "xsd: double" / >

    < xsd: element name = "A-NUMBER-IN" minOccurs = "0" maxOccurs = "1" type = "xsd: double" / >

    < / xsd: SEQUENCE >

    < / xsd: complexType >

    < / xsd: element >

    < xsd: element name = "CALCPRODUCTOutput" >

    < xsd: complexType >

    < xsd: SEQUENCE >

    < xsd: element name = "RETURN" type = "xsd: double" / >

    < xsd: element name = "G" type = "xsd: double" / >

    < xsd: element name = "B" type = "xsd: double" / >

    < / xsd: SEQUENCE >

    < / xsd: complexType >

    < / xsd: element >

    < / xsd: Schema >

    < / types >

    < name of message = "CALCPRODUCTInputMessage" >

    < name of part = "parameters" element = "tns:SNUMBER - CALCPRODUCTInput" / >

    < / message >

    < name of message = "CALCPRODUCTOutputMessage" >

    < name of part = "parameters" element = "tns:CALCPRODUCTOutput" / >

    < / message >

    < portType name = "CALCPRODUCTPortType" >

    < operation name = "CALCPRODUCT" >

    < input message = "tns:CALCPRODUCTInputMessage" / >

    < output message = "tns:CALCPRODUCTOutputMessage" / >

    < / operation >

    < / portType >

    < connection name = "CALCPRODUCTBinding".

    Type = "tns:CALCPRODUCTPortType" >

    " < style: soap = transport = 'document' binding ' http://schemas.xmlsoap.org/SOAP/HTTP "/>

    < operation name = "CALCPRODUCT" >

    < soap: operation

    soapAction = "CALCPRODUCT" / >

    < input >

    < soap body parts: = 'settings' use = "literal" / >

    < / Entry >

    < output >

    < soap body parts: = 'settings' use = "literal" / >

    < / output >

    < / operation >

    < / binding >

    < service name = "CALCPRODUCTService" >

    < documentation > Oracle Web Service < / documentation >

    < name of port = "CALCPRODUCTPort" binding = "tns:CALCPRODUCTBinding" >

    < address soap:

    " location = ' http://our_db:8080 / orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT "/>

    < / port >

    < / service >

    < / definitions >

    -----------------

    | SQL Developer |

    -----------------

    SET serveroutput ON

    -------------

    | First WS.

    -------------

    DECLARE

    V_SOAP_REQUEST XMLTYPE: = XMLTYPE (' <? xml version = "1.0"? > < env:Envelope xmlns:env = "http://www.w3.org/2002/06/soap-envelope " > < env:Body > < query xmlns = "http://xmlns.oracle.com/orawsv" > < type of the argument texte_requete = "SQL" > <!) ([CDATA [SELECT * FROM for_web_info WHERE the INSTR (UPPER (we_are_from),: e) > 0]] > < / query_text > < link name 'e' = > SLOVENIA < / bind > < false pretty_print > < / pretty_print > < / query > < / env:Body > < / env:Envelope > ');

    V_SOAP_REQUEST_TEXT CLOB: = V_SOAP_REQUEST.getClobVal ();

    V_REQUEST UTL_HTTP. REQ;

    V_RESPONSE UTL_HTTP. RESP;

    V_BUFFER VARCHAR2 (1024);

    URL VARCHAR2 (4000): = ' http://our_db:8080 / orawsv ';

    BEGIN

    V_REQUEST: = UTL_HTTP. BEGIN_REQUEST (URL = > URL, METHOD = > 'POST');

    UTL_HTTP. SET_AUTHENTICATION (R = > V_REQUEST, username = > 'OUR_U', PASSWORD = > 'OUR_P'); -not case-sensitive

    V_REQUEST. METHOD: = 'POST';

    UTL_HTTP. SET_HEADER (R = > V_REQUEST, NAME = > 'Content-Length', VALUE = > DBMS_LOB.) GETLENGTH (V_SOAP_REQUEST_TEXT));

    UTL_HTTP. WRITE_TEXT (R = > V_REQUEST, DATA = > V_SOAP_REQUEST_TEXT);

    V_RESPONSE: = UTL_HTTP. GET_RESPONSE (V_REQUEST);

    LOOP

    UTL_HTTP. READ_LINE (V_RESPONSE, V_BUFFER, TRUE);

    DBMS_OUTPUT. PUT_LINE (V_BUFFER);

    END LOOP;

    UTL_HTTP. END_RESPONSE (V_RESPONSE);

    EXCEPTION

    WHEN UTL_HTTP. END_OF_BODY THEN

    UTL_HTTP. END_RESPONSE (V_RESPONSE);

    END;

    anonymous block filled

    " <? xml version ="1.0"? > < envelope soap: xmlns:soap = ' http://www.w3.org/2002/06/SOAP-envelope ' > < soap: Body > < queryOut xmlns = " http://xmlns.Oracle.com/orawsv "> "

    < set of LINES > < ROW > < SOME_HELLO_TEXT > HI everybody :-) < / SOME_HELLO_TEXT > < WHEN_INSERTED > 03.10.14 < / WHEN_INSERTED > < WE_ARE_FROM > Ljubljana, Slovenia < / WE_ARE_FROM > < / ROW > < / rowset > < / queryOut > < / soap: Body > < / envelope soap: >

    --------------

    | Second WS.

    --------------

    DECLARE

    V_SOAP_REQUEST XMLTYPE: = XMLTYPE ("<?") XML version = "1.0"? > < soap envelope: xmlns:soap = "http://www.w3.org/2002/06/soap-envelope" > < soap: Body > < xmlns SNUMBER-CALCPRODUCTInput = ""http://xmlns.oracle.com/orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT"(> < A-NUMBER-IN > 2 < / A-NUMBER-IN > < B-NUMBER-INOUT > 3 < / B-NUMBER-INOUT > < R-NUMBER-OUT / > < / SNUMBER-CALCPRODUCTInput > < / soap: Body > < / SOAP: envelope > '); "

    V_SOAP_REQUEST_TEXT CLOB: = V_SOAP_REQUEST.getClobVal ();

    V_REQUEST UTL_HTTP. REQ;

    V_RESPONSE UTL_HTTP. RESP;

    V_BUFFER VARCHAR2 (1024);

    URL VARCHAR2 (4000): = ' http://our_db:8080 / orawsv/OUR_SCHEMA/WS_CALC/CALCPRODUCT ';

    BEGIN

    V_REQUEST: = UTL_HTTP. BEGIN_REQUEST (URL = > URL, METHOD = > 'POST');

    UTL_HTTP. SET_AUTHENTICATION (R = > V_REQUEST, username = > 'OUR_U', PASSWORD = > 'OUR_P'); -not case-sensitive

    V_REQUEST. METHOD: = 'POST';

    UTL_HTTP. SET_HEADER (R = > V_REQUEST, NAME = > 'Content-Length', VALUE = > DBMS_LOB.) GETLENGTH (V_SOAP_REQUEST_TEXT));

    UTL_HTTP. WRITE_TEXT (R = > V_REQUEST, DATA = > V_SOAP_REQUEST_TEXT);

    V_RESPONSE: = UTL_HTTP. GET_RESPONSE (V_REQUEST);

    LOOP

    UTL_HTTP. READ_LINE (V_RESPONSE, V_BUFFER, TRUE);

    DBMS_OUTPUT. PUT_LINE (V_BUFFER);

    END LOOP;

    UTL_HTTP. END_RESPONSE (V_RESPONSE);

    EXCEPTION

    WHEN UTL_HTTP. END_OF_BODY THEN

    UTL_HTTP. END_RESPONSE (V_RESPONSE);

    END;

    anonymous block filled

    <? XML version = "1.0"? >

    " < envelope soap: xmlns:soap = ' http://www.w3.org/2002/06/SOAP-envelope/ ">

    < soap: Body >

    < soap: Fault >

    < Code: soap >

    < soap: value > SOAP: sender < / SOAP: value >

    < / Code: soap >

    entry processing < soap: reason > error < / SOAP: reason >

    < soap: detail >

    " < OracleErrors xmlns =" http://xmlns.Oracle.com/orawsv/faults "> "

    So OracleError >

    < ErrorNumber > ORA-19202 < / ErrorNumber >

    < message > <! [CDATA [error has occurred in the processing of XML]] > < / Message >

    < / OracleError >

    So OracleError >

    < ErrorNumber > ORA-06550 < / ErrorNumber >

    < message > <! [CDATA [line 1, column 24:]] > < / Message >

    < / OracleError >

    So OracleError >

    < ErrorNumber > PLS-00302 < / ErrorNumber >

    < message > <! [CDATA [component "WS_CALC" must be said]] > < / Message >

    < / OracleError >

    So OracleError >

    < ErrorNumber > ORA-06550 < / ErrorNumber >

    < message > <! [CDATA [line 1, column 7:]]

    [[PL/SQL: statement ignored]] > < / Message >

    < / OracleError >

    < / OracleErrors >

    < / Details: soap >

    < / soap fault: >

    < / soap: Body >

    < / envelope soap: >

    With reference APEX web service, the response is exactly the same and apex_web_service.make_request also work.

    Thanks again.

    The SOAP request is not correct.

    must be:

    So again, it does not solve the problem:

    -Which user you are using to authenticate on the other side?

    If it's another user the owner of the package, then of course you must grant the execute privilege appropriate to this user (and possibly one explicit SELECT on the table referenced too privilege).

  • Cannot consume the XML in OSB response

    Hello

    I'm trying to consume an xml response returned by the .net web service. I use OSB service legend to ask and get a response from the web service.

    Legend of service:
    Checked: Configure Palyload Document
    Request variable: pushCustomerRequest
    Response Variable: pushCustomerResponse

    The .net Web service XML response:
    < xmlns:soap: envelope soap = "http://schemas.xmlsoap.org/soap/envelope/" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" container = "http://www.w3.org/2001/XMLSchema" >
    < soap: Body >
    < pushCustomerResponse xmlns = "http://tempuri.org/" >
    < pushCustomerResult >
    < envelope soap: >
    < soap: Body >
    < pushCustomerResponse >
    < StatusCode > 0 < / StatusCode >
    < StatusDescription > SUCCESS < / StatusDescription >
    < ErrorCode / >
    < ErrorDescription / >
    < / pushCustomerResponse >
    < / soap: Body >
    < / envelope soap: >
    < / pushCustomerResult >
    < / pushCustomerResponse >
    < / soap: Body >
    < / envelope soap: >

    When I try to consume the response message using an action to assign as below, I just get: < PushQuoteResponse > < StatusCode > 0SUCCESS < StatusCode > < / PushQuoteResponse >
    Assign the Action:
    < PushQuoteResponse >
    < StatusCode > {$pushCustomerResponse} < StatusCode >
    < / PushQuoteResponse >

    When I try to use $pushCustomerResponse / / StatusCode I get nothing.

    Any ideas?

    This is because your XML response is with a full namespace and you use no namespace in the XPath expression.

    Try this:

    
            {data($pushCustomerResponse//temp:StatusCode)}
    
    
  • Background thread, kSoap, WAP 2.0 crashing

    My apologies for the title of the topic, I did not know how to phrase my question correctly!

    Background:

    I created an application (partially) work that implements a timer started from a different point of entry.

    The timer calls a thread about every ten seconds. The thread running queries from web services to a remote server and analyzes the responses. This is done using the kSOAP library and and connector MDS on BES, WAP 2.0 so decommissioning the client uses not BES.

    Problem:

    Everything works a treat for the connection of BES and some suppliers of WAP 2.0. The majority of client machines using WAP 2.0 do not work.

    The error returned by the application is IllegalStateException: no instance of the application. It is thrown only with WAP 2.0. The error occurs directly after the execution of the method in the class of kSOAP HttpTransport.

    Ht HttpTransport = new HttpTransport (SERVICE_URL + ";" deviceside = true; ConnectionUID ="+ wapUid());

    HT. Call();

    I tested this thorougly but this is my first BlackBerry application and there is obviously something I am doing wrong.

    Test:

    Here are things I've already tried.

    1. I wrote a separate application that passes the raw XML data to the web server, the response is rendered to the screen. It works on WAP 2.0 and has no problems or interference of the WAP gateways or transcoders.
    2. I wrapped the ht.call inside an executable invokeAndWait () function. I thought that maybe the kSOAP library was interfering with the user interface?

    Please note that the exception does occur in the instance of the application started by another entry point. Web services work very well on all WAP 2.0 providers (that have been tested) in the application of the user interface.

    Thanks in advance.

    James

    invokeandwait is not solution (especially not when he dressed network code, never do this)

    You must catch a Throwable instead of an Exception. The traces are deleted on exceptions for performance reasons (per OS), only throwable objects have them.

    you did not really answer the question of what the other entry point did, I'll try to explain my question.

    you start the application UI about to enter normal.

    start an application when the autostart entry point is called? with xxxapp.enterEventDispatcher?

    If this is not the case, this might solve your problem.

    instead of closing a user interface application, you can use requestBackground. several applications of system use this mechanism. If you select 'Close' in the menu of the browser, for example, the browser is only put in the background.

  • iPhone to make poping noise

    When I press on toward the bottom in the lower left corner of the screen of my iPhone 6 it made a poping sound. I think to send my phone to Apple. How much would it cost to to drop? And is there a way for me to fix it myself? Initially, I posted this in hardware iPhone but got no answer.

    Hi, gmcdaniel!

    Thank you for using communities Support from Apple. After reading your post, I understand that you have questions about the service or your iPhone options, as it is by a pop sound when you press the lower left corner of the screen. I rely on my iPhone every day, so I know how it is important to address any unexpected occurring. I'd be happy to help you with information!

    I would definitely recommend getting the iPhone reviewed to determine what is the origin of the jerky sounds. Once an Apple Genius or a technician certified by Apple has had the opportunity to inspect the iPhone, they can provide you with a repair plan and costs associated with it.

    You are invited to bring the iPhone to an Apple Retail Store or Apple authorized service provider, can find places, find contact information and address reservations on this site: Apple - find

    You can also reach to Apple directly to inquire about the possible mail and self-service options here: contact Apple support

    For more information, you can take a look at the following Web site: iPhone response Service

    See you soon!

  • Apple Dock of lightning - line level output?

    I have a question that maybe with that you audiophiles out there can help.  Descriptions and comments from the dock connector 30 pins for the pre at first touch screen iPod claimed (correctly I think) that the mini stereo 3.5 mm output port of these docks early provided output audio line level, offering the best quality audio when connecting to the RCA inputs of the channel to audio amplifiers domestic. I am trying to determine if the pier lightning currently available for iPods and iPhones to end model offers the same line-level output signal from its 3.5 mm plug.   I'm having a hard time getting a definitive answer.  My research here on the web and the responses from Apple store geniuses have contradictory opinions. Specifically, I want to be able to use the lightning dock to connect a 5th Gen iPod or iPhone 6 to my stereo.  Thank you

    It is line level, not affected by the volume of the phone controls.

  • Showcase (?) does not work for some sites.

    My problem is basically this: link text

    Some sites are listed, some are not. It's like to happen in a random order. I tried to clean the cache, it did not work.

    Any ideas?

    The pages that sends a non-magasin or no.-cache header are not cached and therefore Firefox does not generate a thumbnail.

    • bug 756881 - new thumbnails tab is displayed does not (or old images posted) for Facebook, Twitter (sites using Cache-Control non-magasin)

    (Please, don't comment in bug reports)

    You can check via the Web Console HTTP response headers (Web Developer > Web Console;) CTRL + SHIFT + K)

  • OSX 10.11.3 Hp J3600 series driver not found

    Hello

    My macbook 12 "2015 the last updated, yet the hp officejet j3600 series, look at the picture.

    Serching the Web for quick response, so we got offers to download the previous version of hp drivers including 500 MB download-only.

    Coming, as it is easy to install a former driver for the printer?

    Best regards.

    HP v3.1 for OS X printer drivers

  • How to install the language Farsi on Windows XP?

    I have windows xp 2002 but I need to install farsi language?

    * original title - it *.

    If you want to use Farsi keyboard follow the link in "Singapore Web hosting!" response, but his answer is not true on the retail XP versions. There is no commercial version of Farsi in XP! Support Microsoft UI Farsi of the LIP and you must install the LIP for Farsi and you can install it on almost any version of XP with Service Pack 2.0.

    You can get the LIPS for Farsi from this link:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=0DB2E8F9-79C4-4625-A07A-0CC1B341BE7C&displaylang=FA

  • Windows message in sart up

    During the boot process, I get the following message is displayed:

    DLLC:\WINDOWS\SYSTEM21ZHELPER32. DLL is not a valid Windows message. Please check against your installation disc.

    I am also told that my computer is infected by Worm.Win32.NetSky. I've tired using a Netfix Win32skynet removal tool and tells me, there is nothing on my PC. I also ran a full system scan McAfee, but still have the same problem. I keep get WARNING screens popping up telling me to virus scanner complete etc. Any idea?

    At this point windows is reinstalled a viable option?  That would most likely solve your problem, but it is not a good solution if you don't have the cd to repair and have no way to back up your files.  And as for the worm.  I will try to check on the web for this response.  Looking specifically for "Worm.Win32.NetSky" it should come with some good options.

  • How to use json webservice in blackberry waterfalls

    1. how to use json WebService in the cascades of blackberry.

    2.i need to get data from url link in the qml page. give suggession with examples if possible.

    my link of web service contains the type of array

    for example: {'address': ['zone': 'RCS', 'city': 'ght']}

    Description:

    JSON link--> http://192.168.1.251:410/Mobile/Service1.svc/english/Category?CountryID=1

    using link above please ask how to recover data from json webservice cascading... I need answer to the method of waterfalls...

    Finally, I am me anser for service web json

    Response---> http://stackoverflow.com/questions/18598886/how-to-use-json-webservice-in-blackberry-cascades/186230...

Maybe you are looking for

  • my watch always prompt to update 2.2.1

    I did not use the beta software at all on my watch, just my phone and I have already deleted the profile of bet, I turned off both devices gave him a few on each and still unable to get the 0 s 3 update.  He said that my watch is up-to-date with 2.2.

  • RAC and non-RAC db backup script

    Hi allI need to create a hot backup RMAN script for a hot full backup of database RAC 2 nodes 11.2.0.4 version.I have a script that works perfectly in the stand-alone database. This script ran in the database of no - ASM no CARS.It is: if I implement

  • How can I restore Photoshop Elements 9 on my Mac?

    Hi, I bought a Wacom Bamboo tablet a few years back and had downloaded Photoshop Elements 9 (which was provided with the Tablet) on my Macbook Pro. However, the computer crashed and we lost everything; all applications, downloads and photos. I am con

  • How can I create several galleries within a section of a Web site?

    HelloI hope someone can help with this. I tried so many things at this point, I think I've regressed.Basically I have a portfolio on a website section. There are 8 images representing the 8 projects in portfolio, I want the images to be triggers and

  • Invalid parameter string

    HelloI often validation error when I want to import into parameters in a child workflows.In my workflow, a string is initialize with a number (strValue). I checked that the value is correctly set (System.debug (strValue)).Later in my workflow, he lau