Write a question about basic series and Read.vi

Similar Questions

• How controls are grouped in the front pannel "write basic series and Read.vi.

  I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

  Thank you.

  

  Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Question about windows theme and display of Web pages

  I have everything, I'm new here, I've had my laptop for about 8 months, but it was stored for the 6 months, so he had only 3 months of use, and that was 99% for watching movies as was my laptop backup (my girlfriends, which was never used)...
  Well I just got my laptop storage and started using it again as I want now to do that my main work computer, it's a Satellite A100 Series. Running Win XP Pro SP2. Well, now I used it for about 1 week now and this is a fantastic computer, expecially the swipe away feature, I'm usually one XP Home Edition, but I do with Pro, just did not have any experience with it...

  Now, here's the problem, and this has always been the problem since bought, when we first bought it and connected to the internet with IE7 fonts have been massive, I figured out how to fix this in the display after a few hours to play settings and also noticed Web pages if there is a background image, it does not appear... (I also found this week is the same for any application on the PC that uses a Web page as Set up, or something, just sectain things... as I open the Security Center in the control panel and everything is white, and background images aren't there (which is white) and even corners which are background pictures are not displayed and comparing to) my other computer, there should be a green and red, background color etc.
  With Windows Media Player buttons should be as purple and black in WMP11, and they like a white background style html on buttons with links to them at the top and playback, stop, etc buttons have a back outside and the inside is white...

  Basically what I'm saying, is that she appears not CSS style WC3 content on some pages and applications on the laptop, and with regard to Web pages that they are exactly the same, I tried IE7, FireFox, front Browser, and still, the only one that displays pages almost as it should is Opera 9.2, but I really need to solve this problem... it is something simple to do with display obioussly , or settings, but I have tried literally every single different way of doing things last week, tried everything in the Control Panel, all toools Toshiba and no results.

  I'm not a beginner, or whatever it is, I can't get this problem, I can't even think of a setting that would do this let alone in trying to resolve this... I have all the Windows updates (although as I said, he did this from the first day of purchase)...

  If I could post a screenhot here I could show you... what Web pages look like in IE7 and FireFox and before (the only difference is Internet Explorer pages is mostly gray and firefox is white, gray is also.)

  Another question, when I was messing with the settings in the Control Panel, under Performace I changed it to something like 'make optimal display for performace' rather than 'Best to display' and it is then my control panel simple with a white background, and everything is not how I'm used, even the categories are made for each section , they are just all grouped together here, and my house Windows on my other laptop is positioned like this, but it at least has a sidebar on the left with a button to change it back...
  now I am at a loss to find the Performace button, as it is there is more, and I want to change it to 'show better for display' not the persomance... so if someone knows how to do this, please let me know... I took a screenshot of my control panel... and it's not naked, I use the Zune Windows (the black buttons and backgrounds theme ), so he used to be a gray background with a status bar on the side with all the links and details dark just like folders etc... So yes, it is another thing that I want to fix.

  Also I do not have the CD to fix it, not more that I think that she needs, but I have a standard out of the box disk Win Xp Pro, I was seriusosly do a fresh install, but I know I'll lose all modules of toshiba and all the extras that it is came up with, that's the only reason for which I don't have as it has Protector Suite QL, that I would have to pay to settle down to do a cleanup, and I really want to do because there is obviously something missing, its as simple as that, there is nothing wrong with the system it is just not set up correctly.

  Here are some screenshots of how I see Web pages, my Security Center Page and my control panel because I messed up he do "Get the best performace of" upward and the screen turned to the basic white and half things in the control panel is now missing, it has been setup in the previous categories... ahhhhh When I try to solve the original problem, I've done another...

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_01-1.jpg

  {It is the Security Center screen when I click in the Panel, that was before I did it fade)

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_02Sep3021.54.jpg

  ("it's now my control panel once I went in ' Premformance and display ' (I think. it was certainly performace in the name of the category)... and I changed a parameter of performance and display which actually use less resources... now I can't change it back, as the button performace is no more :())

  Thanks for reading and I hope although there, can anyone help me cos I hate having to do a fresh install on something as small as this, it is not many programs Add on on my laptop, as I said, it has probably beeen used 20 times ever, and especially for watching movies up to 1 week where it sat in storage for 6 months ago ,,

  Any help would be greatly appreciated... I tried all the Options of the Internet, all the Display Options, all variants, I need something specific, it is not only perform the internet, but the global programs with html style links, etc. and certainly CSS style sheets and the background image in the HTML feature.

  Thanks in advance.

  Hi Jay

  Very impressive display! I can see after 4 days, nobody wrote anything to give you the solution for your problem. I read your announcement with a lot of attention and I have to say that it was not easy to figure out your problem exactly (perhaps because English is not my native language).

  I know very well that new OS install is radical and last solution but I recommend you to check some forums Microsoft WXP because issue described is, in my opinion, more for OS forums for Toshiba forum.

  If you display the same thing in forum Microsoft please post the link, and we can follow the discussion here.

  I wish you good luck and I hope you will find answers soon.

• Questions about Failver customer and rapid failover

  have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.
  
  
  
  -We have two physical locations called "ABC" and "PQR".
  -ABC is the main site.
  -PQR is the backup site.
  -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
  -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
  -Data Guard has been configured between ABC and PQR and it works as expected.
  -Please note that we have a license for Active Data Guard.
  -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
  -We have not yet set up a Data Guard Broker.
  
  We want to achieve under objectives:
  
  
  Objective 1:
  -------
  
  Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
  I guess it's called 'Fast Failover'. Please let me know if I'm wrong.
  
  Issues related to the:
  
  -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
  -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
  -What the client application / which is already connected to the CARS.
  -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?
  
  
  Objective 2:
  --------
  
  As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.
  
  -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.
  
  -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
  However before that happens, standby database should become primary because the client session can perform write operations.
  
  According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.
  
  
  
  Issues related to the:
  ----------
  
  1. Please throw some light to reach above features.
  2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.
  
  
  Could you please help?
  
  Thank you

  I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

  Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
  http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
  What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

  Edited by: P. Forstmann on Dec 8. 2011 20:30

• Questions about the performance and discs

  Specifications of the computer:
  ASUS P6X58D Premium Mainboard
  Intel Core i7 930 (no decree with Zalman 10 X Flex cpu cooler)
  12 GB (six 2 GB) Kingston PC3 10600
  PSU Antec CP - 1000 1000 watt
  NVIDIA GeForce GTX 480 video card
  Card RAID Areca ARC - 1680IX - 12 PCIe x 8 SAS
  (hard drives listed below)
  Windows 7 Pro 64-bit, with many system applied settings (no antivirus loaded into the machine.
  No startup process all active.)
  Adobe Production Suite (enabled in PPro CS5, update 5.02 MPE) installed
  Latest Nvidia drivers installed.

  Blackmagic Disk Speed Test

  (system disk) Two Intel X25M MLC GEN 2 80 GB SSD drives in a striped RAID 0 array.
  read: 501.0 MB/s write: 130,9 Mbps

  (disk storage) 2 a to 2 WD 7200 RPM 32 MB SATA hard drive.
  read: 117,0 MB/s write: 118.4 MB/s

  (project reader) Three WD black 1 TB X 6 GB/s 64 MB of cache disks in RAID 5 array.
  read: 211,9 MB/s write: 215,3 Mbps

  These moments of read/write comparative look correct?

  Video editing:

  DV (720 x 480) 48 hz audio 30 fps 3.6 MB/s
  4 layers
  Layer 1-100% opacity, applied Cineon converter
  2 - layer 50% opacity, vertical flipping applied
  Layer 3 - 30% opacity, applied color balance filter
  Layer 4 - 20% opacity, filter contrast applied
  read the full resolution
  IN TIME REAL
  CPU utilization - 25% (I knew performance DV would be awesome.) I could have added more layers but stopped at 4)

  AVCHD (1920 x 1080) 48 hz audio 60 fps 3,1 MB/s
  2 layers
  Layer 1-100% opacity, filter contrast applied
  Layer 2-50% opacity, vertical flip
  reading of the resolution 1/4th
  Real-time
  CPU utilization - 98-99% these specifications of reading straight look? The GPU is doing its part to work? I guess that my GTX 480 is positioned in the right slot?

  Question: The cards need fast RAID when the flow of AVCHD is 3. 2 MB/s?    ?
  

  I find it interesting that I spent $4K on a computer and I only make 2 layers of AVCHD in real-time (from reading of resolution 1/4). I am aware that my provider built computer is more expensive, but in return, I will say it is surprisingly quiet.  :-)
  

  Should I wait for performance significantly more when I switch to the 980 x cpu and 24 GB of RAM? Maybe I owe OC my processor for best results, but I have neither the time nor the inclination to teach myself overclocking. (Anyone know of a person in the Phoenix area, AZ, who is skilled at overclocking)? I did not test PPBM5 I just want to get better performance for what I paid. Maybe my expectations are wrong?
  

  I suggest that update you with the version of StorPort that is the improved version of the driver technology Microsoft.  SCSIport is what has been used for Windows XP.

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Question about subjects, books and tables of contents

  I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

  It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

  The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

  If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

  P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

• Questions about apex_web_service.make_request and collections

  Hello
  
  I began using with Apex Web services, and I have a few questions about the apex_web_service.make_request procedure. You can pass a name of the collection as a parameter. I'm a little confused on this parameter from the collection...
  
  This is perhaps a silly question, but the documentation is not very clear, so... This procedure always inserts just a line in the collection (with the XML returned by the web service call), or are there cases where several lines will be inserted?
  
  If there is still only a single row, what are the practical reasons to use a collection for her? I ask because in most cases interest you about the columns/rows to display in a form or a report in the Apex and I don't see the advantage to store in a collection of single-row, but I may be missing something...
  
  If the response contains several rows of data, it will be automatically extract the lines and insert them into the different lines of the collection? (posts...)
  
  What is the best approach then to extract several rows returned in the XML response and insert them into a collection? Currently I use XMLTABLE in a loop and call apex_collection.add_member for each row returned. is there a better way to do it?
  
  Thank you
  Luis

  Luis,

  the webservice returns only one row in the results collection.

  XMLTABLE using is a good idea, instead of using a loop, you can also use APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY or CREATE_COLLECTION_FROM_QUERY_B (B for bulk which may mean 'fast').

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• Question about importing RAW and JPEG

  Greetings,

  Support of Adobe at the following page talks about the "import and preferences file management Definition:

  http://help.Adobe.com/en_US/Lightroom/3.0/using/WSA66356E1-47C3-405f-8E7F-0FD7AAEB0575.htm l

  I have a few questions about this, and I would really appreciate your input gtting. (I also posted this question on this page, but I don't know if it was the right place...)

  1. that means 'otherwise, Lightroom treats the JPEG in doubles as a file? The JPEG format is not available at all in these circumstances? What can I do with this file "jpeg"? Is located in the same folder as the RAW images?

  2. my understanding is that the JPEG image contains the treatment unit (e.g., Vivid, sharpning, etc.); When I import pictures from my Nikon (NEF) raw, LR does not apply to these parameters, and the image I see in LR is * really * gross (i.e., bland and "free upgrades").  If I shoot and bring in JPEG and RAW, LR is it possible to have LR somehow automatically "make RAW image look like the JPEG?

  Thank you in advance!

  Zevi

  (1) No, it simply as an initial overview.  LR replaces this overview as soon as it renderes its own.

  (2) the profiles are already built for Nikon and Canon.  Look in the calibration Panel in the develop module.

• Question about AP Autoinvoice and macthing the invoice?

  "Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.
  
  The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?
  
  
  Thanks in advance!

  Hello

  You have not need manually match invoices to the BP.

  The standard functionality of the remuneration to the receive function is as mentioned below:

  You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

  After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

  When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

  I hope this helps.

  Thanks and greetings
  Jeanny.

• Question about Powerconnect M6220 and out-of-band/management 8024-K connection

  I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here.

  My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for example port 18 for example) or through connection of the M1000e CMC?

  The reason for this question. We recently vlaned our network and CMC modules are VLAN 8 (10.100.8.0 255.255.248.0) and management of our switches is supposed to be on the VLAN 1 (10.100.1.0 255.255.255.0). I can't ping on the affected IPS (IE 10.100.1.15), but our CMC modules are fully accessible (IE10.100.9.120). Our blades are fully accessible and can access all the VLANS on them (they are the ESX host).

  Finally, I'm sorry if all necessary information has been provided, I'm not so much a networking guru.

  Thoughts?

  Thanks for your help

  The OOB interface is connected to the chassis management controller by the median plane of the chassis. Traffic on this

  port is separated from network traffic operating on the switch ports and cannot be lit or routed to the operational network.