Write data to text file generates the error

Similar Questions

• How to write graph of waveform data to text file with the option to the user to do

  So, I'm new to labview and will have bad to write a program in particular.  I have a waveform graph that runs for 120 seconds, generating a sine curve.  I am, however, having a time difficult get the program to write the x and are coordinated in a text file.  I've attached what I have so far.

  The first task I was assigned was to write a program that creates a curve of snusoidal on the front panel by adding a data point every half second for 120 seconds.  The plot should starts only if the user presses a button to start.

  The next part is to give the user an option to write the data generated in a file of worksheet called 'sine.txt '.  The file name and location should be hard-coded.  The file must contain the x and there contact information of each data point in columns separated by tabs, also known as the delimited.

  I spent several hours refining the attached program, and I can't seem to make it work right.  Any suggestions would be helpful at this stage.

  Sincerely,

  A student of chemistry frustrated whose research mentor is out of town

  First, you create files Excel.  You create text files.  And it seems that your writing on a file already created X (time) vs Y (curve of data) that is delimited by tabs.

  All you do is simply too complicated or a Rube Goldberg.

  All you need is the joint.

• How to write data in text file

  Hello
  
  When I save the following code in a package as a procedure.
  He made a mistake
  
  (1): PLS-00201: identifier ' TEXT_IO. Type_de_fichier ' must be declared
  
  
  
  code
  ===
  
  PROCEDURE prc_writefile
  (v_fname IN VARCHAR2,
  v_input1 IN VARCHAR2,
  v_input2 VARCHAR2)
  IS
  
  linebuf VARCHAR2 (5);
  in_file Text_IO.file_type;
  OUT_FILE Text_IO.file_type;
  
  BEGIN
  -print
  OUT_FILE: = Text_IO.fopen('C:\saved_log.txt','a');
  Text_IO. Put_line (' out_file,' updated a file ' |' test data ');
  Text_IO.fclose (OUT_FILE);
  
  
  EXCEPTION
  WHILE others THEN
  MESSAGE(SQLERRM||) e '|| SQLCODE);
  END;
  
  END;
  
  
  ===========
  
  
  How to reach the Text_IO package built to this
  
  
  Rgds
  
  sexy

  Vanessa,

  Text_io is built in package provided with Oracle Forms but not db. If you need manage files db level, use utl_file.

  Thank you
  Raja.

• Satellite P500/01R reads the data, but cannot write data on CD files

  I recently bought a laptop Satellite P500/01R. I am able to read a data CD, but can't write data on CD files. The CD is read/write.

  Any ideas?

  Hello

  Have you tried different burning software?
  I m using Nero and in my opinion one of the apps better combustion.
  Here, I can choose between CD, DVD, DL or Blueray (only possible if the CD/DVD drive also supports this).

  Have you also checked diffΘrents CDs from different manufacturers?
  You should do this since not all disks are 100% compatible.
  I had several problems with different CD or DVD in most of the cases it was a compatibility issue, I tried TDK and this kind of drive is compatible with my CD/DVD drive
  I m using the standard of R.

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move

• Try to update CC Bridge and Photoshop CC 2014 generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210)

  Try to update CC Bridge and Photoshop CC 2014 Creative Cloud program generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210). I am running Windows 7. Previous traffic on this subject did not help my situation.

  Please clean the cache of the MAO by deleting after the contents of the folder:

  For Mac:

  ·        /Volumes/%volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0

  To win:

  ·        C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0

  Then try to run updates.

  Kind regards

  Ashutosh

• DASYLab how to write data to a file every 15 minutes

  Hi all

  I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

  The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

  Thank you

  Write less data in the file that you have collected requires the reduction of certain data.

  There are three techniques to consider.

  With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

  Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

  Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

  Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

  Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

  In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

  Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

  In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• Write to a text file

  Hi friends,
  
  I want to write an error in a text file using the procedure but its throwing an error below
  
  declare
  f utl_file.file_type;
  s varchar2 (200);
  Start
  f: = utl_file.fopen('C:\TEMP','NCW_ET15.log','W');
  loop
  UTL_FILE.put_line (f, s);
  dbms_output.put_line (s);
  end loop;
  exception
  When NO_DATA_FOUND then
  UTL_FILE.fclose (f);
  end;
  
  ==========
  
  Error report:
  ORA-29283: invalid file operation
  ORA-06512: at "SYS." UTL_FILE", line 536
  ORA-29283: invalid file operation
  ORA-06512: at line 5
  29283 00000 - "invalid file operation.
  * Cause: An attempt was made to read from a file or a directory which is
  not exist, or the file or directory access was denied by the
  Operating system.
  
  Any ideas how to solve this problem...
  
  Thank you
  Lony

  Hi Lony,

  You may not use the operating system directory here.

  You must create the directory object in oracle.

   
  
  create or replace directory temp_dir as 'C:\temp'; 
  
  grant read , write on directory temp_dir to hr; -- Username 
  

  To create any directory, 'create any directory of grant' privilege.

   
  
  declare
      f utl_file.file_type;
      s varchar2(200) := 'Line 1';
  begin
      f := utl_file.fopen('TEMP_DIR','NCW_ET15.log','W');
      utl_file.put_line(f,s);
      utl_file.fclose(f);
  exception
      when NO_DATA_FOUND then
  utl_file.fclose(f);
  end;
  /
  show errors 
  

• Save the text file on the desktop

  Hello world

  See my code below. It saves the text file in the root folder. But I want to save my file of text of the report on the desktop in a folder called report.

  Secondly, when I run this script twice, he adds comments twice in the text of the report file and does not replace the text file report.

  Can someone please correct this JS script.

  function write (text) {}

  var myDocName = app.activeDocument.name;

  var myFilePath1 = + ' / ' + 'Report' + ".txt";

  var monFichierTexte = new queue (myFilePath1);

  If (myTextFile.exists)

  {

  myTextFile.open ("e");

  myTextFile.seek (0, 2);

  }

  else {}

  myTextFile.open ("w");

  }

  myTextFile.write (text + "\r");

  flag = true;

  myTextFile.close ();

  myTextFile.execute ();

  If (flag == false) {}

  Alert ("no error")

  }

  }

  Thank you

  You have contradicting wishes.

  Compare this sentence

  designmon79 wrote:

  I need a code JS that replace my office report text file (if the output) and write the cool comment text in the file.

  with this

  It replaces the report file, but also delete text in the file.

  It seems obvious that if you replace the previous file, the old content will be deleted.

• Digital loading data from text file for Test of numerical limit

  I am a new user of TestStand 2014.  Just downloaded the demo ran successfully the computer.dll tutorial & example "loading limits a File.seq text"; & is now trying to build my own sequence from scratch.  I want to load a number from a text file using the property Loader.  The file contains the following:

  GGbeg
  484
  GGend

  My hand sequence contains 2 markets (see attachment):

  Charger property (which reads the text file & must store the number 484 in the Step.Result.Numeric variable, right?)

  GG-digital-test (which should test the number 484 in Step.Result.Numeric as a Data Source, right?)

  But when I run it, the measure indicates "0" for the value instead of "484".  What I am doing wrong?  Thank you in advance for your help!

  George

  Hi George,.

  The text file must be in the format, includes no property magazine. Use the following in the text file to make it work:

  GGbeg
  Result.Numeric
  GG-digital-test 484

  Value of the variable

  Value of the variable

  Value of the variable
  GGend

  In the Tools menu of the sequence editor, there are some 'Properties Export/Import' tool, which helps to create text files to be used with charger property stage. I highly recommend to create the new file using the tool and then edit the file to change the values.

  -Shashidhar

• How to read/write tdms 2.0 files with the TDM C DLL?

  Hello

  How to read/write tdms 2.0 files with the TDM C DLL?

  How consequently the datas in interlaced with the TDM C DLL mode?

  Thank you

  Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.

• Convert data from text file to display for hex UDP transmission controls

  Hello

  I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

  Any help would be appreciated,

  Thank you

  Hi jsrocket,

  the attached example should work as a transformation.

  Mike

• To find the log/trace file containing the error ORA-00018

  We use the Oracle 10 g on Linux platform. Our application Java has generated the error below:

  An error occurred during the processing of the SQL statement... ORA-00018: exceeded maximum number of sessions

  java.sql.SQLException: ORA-00018: exceeded maximum number of sessions

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:113)

  S/n, said he can't see this error in the alert log file. I want to know if there is any place in the Oracle Server i.e. any file/trace log file that can contain this error.

  Elya wrote:

  We use the Oracle 10 g on Linux platform. Our application Java has generated the error below:

  An error occurred during the processing of the SQL statement... ORA-00018: exceeded maximum number of sessions

  java.sql.SQLException: ORA-00018: exceeded maximum number of sessions

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:113)

  S/n, said he can't see this error in the alert log file. I want to know if there is any place in the Oracle Server i.e. any file/trace log file that can contain this error.

  Oracle has two General classifications of errors; Errors database & application errors.

  Oracle logs in the database for the file alert_SID.log errors.

  Oracle will NOT connect to an error in application & permit enforcement measures considered appropriate (there included logging) for application errors.

  This application uses connection pooling.

  If not, why?

• Download data from text file for Hyperion ESSBASE by FDM.

  Hello
  
  I want to upload data from text file for Hyperion ESSBASE by FDM. The file format is given below.
  
  
  Entity, Department, designation, effective, SalaryPaid
  E11001, BSG, AsstManager, 12, 820000
  E11001, BSG, Manager, 6, 740000
  
  
  Where staff and SalaryPaid is the Member of the account dimension. Entity, Department, and designations are the dimensiosn in the ESSBASE.
  
  Is it possible to download the file above using FDM, can we have two account member in the line?
  
  I am brand new with FDM. ask for your help.
  
  Kind regards
  Sunil

  Create two scripts to import (choose Import Data Pump when you are prompted for the type of import script)

  (1) call the GetAccounts 1st and 2nd PutAccounts
  (2) associate GetAccounts size amount in your import format.
  (3) associate PutAccounts with the account dimension in your import format
  (4) adding NZP expression to dimension of amount
  (5) in GetAccounts put the following code...
  +' Get the names of account in the header line.
  If DW. Utilities.fParseString (strRecord, 5, 4, ",") = "number of head" Then
  + ' Local variables for the account names.
  + Acct1 dim +.
  + Acct2 dim +.
  +     +
  + ' Head Count (column 4 of 5) +.
  + Acct1 = DW. Utilities.fParseString (strRecord, 4, 5, ",") +.
  + ' Wages (column 5 of 5) +.
  + Acct2 = DW. Utilities.fParseString(strRecord, 5, 5, ",") +.
  +     +
  End If

  GetAccounts strField =

  (6) in PutAccounts put the following code...

  +'+ Local Variables
  Dim AcctName (2)
  Dim AmountVal (2)
  Dim z
  Dim rsAppend

  + "The names of individual account is analyzed and stored +"
  AcctName (1) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',')
  AcctName (2) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 2, ',')

  +' If student for accounts from here import file.
  AmountVal (1) = DW. Utilities.fParseString (strRecord, 5, 4, ",")
  AmountVal (2) = DW. Utilities.fParseString (strRecord, 5, 5, ",")

  +' Name of temporary importation work table +.
  strWorkTableName = RES. PstrWorkTable

  +' Create temporary table recordset trial balance +.
  Set rsAppend = DW. DataAccess.farsTable (strWorkTableName)

  For z = 01:58 ' this can change depending on the number of additional accounts processing

  + If IsNumeric (AmountVal (z)) Then +.
  +          +
  + If (z) AmountVal <> 0 Then +.
  +          +
  + ' Create a new record and to provide its field values.
  + rsAppend.AddNew +
  + rsAppend.Fields ("DataView") = "CDA" +.
  + rsAppend.Fields ("PartitionKey") = RES. PlngLocKey +.
  + rsAppend.Fields ("CatKey") = RES. PlngCatKey +.
  + rsAppend.Fields ("PeriodKey") = RES. PdtePerKey +.
  + rsAppend.Fields ("CalcAcctType") = 9 +.
  + rsAppend.Fields ("Account") = AcctName (z) +.
  + rsAppend.Fields ("Amount") = AmountVal (z) +.
  + rsAppend.Fields ("Entity") = 'chain of the entity here ' +.
  + rsAppend.Fields ("UD1") = "string C1 here +.
  + rsAppend.Fields ("node2") = "String C2 here +.
  + rsAppend.Fields ("UD3") = "String C3 here +.
  + rsAppend.Fields ("UD4") = "string C4 here +.
  + "Add folder to the collection +"
  + rsAppend.Update +
  +               +
  + End if +.
  +     +
  + End if +.

  Next

  +' Close the recordset.
  rsAppend.close

  If DW. Utilities.fParseString (strRecord, 5, 4, ',') <> '0' then
  + PutAccounts = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',') +.
  On the other
  + RES. PblnSkip = True.
  End If

  You may need to change the aboveto that meet your exact needs, but the basic structure of the scripts should not change too

  Published by: SH on May 25, 2012 10:34