Write to the file of measurement with a loop For using the value of the dynamic data attributes

Similar Questions

• creation of the loop for a Boolean value

  Hello
  
  I'm still a beginner at so forgive me if this sounds simple...
  
  I created 16 Boolean values with all the false value.
  
  Now with a loop for, I try to create 16 buttons, and when each button is pressed, the respective boolean compared to this button will change to true. Looks something like below:
  
  Somehow, this does not work... someone can point me to an error in the coding? Thank you very much!
  
  
  

  Couple things...

  It is standard for a button work onRelease, not delivery.

  -at your service delivery made reference to the button. Not the root
  panel mounting as you probably want to target. The real problem, however, is the
  the reference to I in the button. If you do a trace (i); within the delivery
  you will find that each button will trace 17. This is because the button don't
  not to maintain a local reference to i - just button refer to the final
  value of i in the main timeline... it's called scope. Sometimes issues of concern
  can be a real challenge. What you need to do is to create a local variable
  in the buttons and I store it in this variable.

  for (var i = 1; i)<= 16;="" i++)="">
  This ["button" + i] .i = i;
  This ["button" + i] .onPress = function() {}
  This ._parent ['status' + this.i] = true;
  }
  }

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Control of data rows Excel (write on a file of measure)

  Hi all

  Objective:

  Get a bit of a live waveform of two pressure sensors, as well as calculate the differential pressure. The LabVIEW VI is intended for students for an exercise in module, in which data are exported to an excel file for the students to perform other calculations. Excel file must contain data from the beginning to the end of a race.

  Problem:

  Pressure sensors work well, waveform table works well, but when you stop the collection of data, the amount of lines in the file Excel output will reflect the number of samples per channel of the DAQmx Read Block (10 = 10 rows of data, 100 = 100 lines, etc.).

  I would appreciate some advice on how to conduct the data collection in the part worksheet from start to finish, without this affecting the aesthetic experience of the student (by that I mean the number of channels of the > 10 sample will cause some lag in the waveform, jerky). I tried to resolve this issue with something in the sense of Tank1Solution.png without success. I've included a photo of the original block (Tank2Block.png) and so I worked the file VI.  Once more, any help would be much appreciated, I'm not well versed in LabVIEW and I do not know how to address this problem effectively.

  Some guys are always doing things the hard way

  

  Of course, you need a son to ai0 - ai2 and ai1 - ai9.  This linear scale DAQmx is of course very convenient! and hey, the TDMS files import beautifully into Excel! the addon is there then why not just open a session data?  TDMS is much more portable than xlsx.

  A few additional remarks. (a) you can't stop this vi before you press Go-who needs a fix. (b) Create scale is likely to return an error as it is the name being illegal. I named it that to show the source of the scale and offset values.

• Unable to read / write in the NFS data store

  Hi all
  I'm having a problem with a NFS datastore in Vcenter. I have an NFS share on a Win2k3 server which I am able to mount. However... I can't write him even though the permissions appear to be correct.  This server is connected to an array of training Vault EVA Storage with 2 TB of storage.
  Looks like he's not more as when I try to mount ad content, it shows as 0.00 B ability... and I know that there are files in the NFS data store. Same Host, I can mount my other NFS datastore successfully since a 2008 Server, just do not know which cannot be configured correctly here.

  Help, please... been at this for 2 days banging my head on my desk!

  Screenshots are attached. If there are log files that I could post that would help, please let me know and I'll join them as well.
  Thank you!

  Woot! It worked. I changed the local article, but then authorized security strategy anonymous access with the 2 GID and UID - 2. Once this is done, it is now properly show in Vcenter and allow me to read and write in the data store. Before that I got the value 0.0 even with security policy, change that did not work. So I hope that this issue helps someone in the future, and they do not have a hair pulling experience like I did.

  WHAT A PAIN!

  in any case, thank you all for your time.

• Manipulate the subdashboards with a loop for?

  Hi all

  Here is a picture of what I'm trying to do: basically, I want to choose the (3 x 3) A subarray, manipulate data, then

  Select the subarray B (2 x 2), manipulate data, and finally select the (4 x 4) C subarray and manipulate its correspondent

  data. In my real problem, I have more than A, B, C. I have a number any variables.

  I have a 1 d table, below, that I use to make a kind of mapping to my 2D table so I can choose the appropriate sub-table.

  Please see the VI attached and see if my approach is logical. To be concrete, the end result of my VI must be a 2D array containing

  A, B, C and for each variable, I want the sum total of all the numbers corresponding to this sub-table.

  For example, for A, I want 1 + 2 + 2 + 2 + 1 + 5. My real data manipulation would be more complicated, but if I can understand this simple case,.

  the real case will follow.

  I do not know where to store each subbarray in my loop and WHEN to do my manipulation of data, it must be inside of the inside of the loop, outdoors, where? See the attached VI.

  Thanks in advance.

  

  I think you need a boot and wiring through the case of fake.

  Note that the output is a table to a dimension.  Because pages can be of different sizes, the pages 'A' and 'B' contain empty elements. If no match is found fo a 1 d, a full page table element will be empty. To see this 'B' to replace in the table 1 d with "D".

  To make your number a string number followed by conversion table amount works well.

  Lynn

• In any case, to use transform activity with a loop for storage of the iterative purpose?

  Hi all
  
  
  I have a question about the processing activity. As I am new to BCI, I want to learn more about the processing activity. If we use a transformation inside a loop activity, all other records other than the last ones will be overwritten. I want to avoid this situation and s output
  
  Scenario of
  -------------------------------
  
  (1) inside a loop for, I keep a DB adapter that will choose 1 row of table. So in each loop iteration for, we will get a line.
  
  (2) in the same loop, we maintain another DB adapter which will retrieve multiple records.
  
  (3) these values, I need to map it to an output variable (output xsd is able to contain multiple records) in the following order.
  < 1Adaptateur out >
  < data1 > < / data1 >
  < data2 > < / data2 >
  < 2 adapter output >
  < data > < / data >
  < data > < / data >
  < / 2 adapter output >
  
  for example)
  < Person > - 1 adapter Db I st iteration
  < name > xx < / name >
  < 23 > < / Age >
  < address > - 2nd iteration of st adapter 1 DB
  home address < address > < / address >
  address of the < address > < / address >
  permanent address < address > < / address >
  < address >
  < / person >
  
  
  < Person > - 1 adapter Db iteration nd II
  yy < name > < / name >
  < 23 > < / Age >
  < address > - 2nd iteration of st adapter 1 DB
  home address < address > < / address >
  address of the < address > < / address >
  permanent address < address > < / address >
  < / book >
  < / person >
  How can I pass the data that we have read from the db adapter in the above format
  
  Pls suggest a solution for this.
  
  Published by: user_ds on June 15, 2011 02:38
  
  Published by: user_ds on June 15, 2011 02:47

  HI'.

  1.) initialize a new variable 'counter' of type int, and assign inside initialize counter = 1
  2.) put the card1 DB and DB map2 invoke the of inside a while loop, then put it
  condition (that you want to use) for the number of times you want to hit the DB again and again
  3.) use affect the activity and inside this use Add and put the [$counter] on the expression of xsl to map to the next node
  4.) now use a beneficiary within an Assign activity where increment you counter + 1

  Yatan-

• Help with a loop For passing parameters...

  Hello

  I am creating four cubes in Papervision using a loop for. The cube class requires, as the first parameter, a MaterialsList. I created four different MaterialLists in my code with the names materialsList1, materialsList2, materialsList3 and materialsList4. In a loop for, I'm trying to pass these variables as MaterialsList parameter. It does not work. If I use the variables themselves in the code, it works fine, so I know that my problem has something to, with how I'm data, type the dynamic name (see Actionscript below). Can someone please? Thank you!

  The Actionscript code:

  for (var i: int = 1; i < 5; i ++) {}

  
  

  var cube: Cube = new Cube like MaterialsList (("materialsList"+i), 396, 40, 494, 8, 8, 8);

  
  

  container.addChild (cube);

  
  

  Cube.x = i * 430;

  
  

  cube.rotationY = 180;

  
  

  Cube.Name = "the cube" + i;

  
  

  trace (cube. (Name)

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OVER, objectOverHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OUT, objectOutHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_PRESS, objectDownHandler);

  
  

  }

  You are welcome.

  If you're still able, please mark this thread as answered.

• Ajouter.1 with a loop for?

  I tried to add du.1 increment a value using a loop for, but the for loop has not added to the value of the specific increments.

  So instead of se.1,.2,.3,.4, etc., I got the following when I traced it the loop:

  0

  0.1

  0.2

  0.30000000000000004

  0.4

  0.5

  0.6

  0.7

  0.7999999999999999

  0.8999999999999999

  0.9999999999999999

  This throws my code completely because it causes the loop to execute unnecessary once and the returned value causes other functions are not working well. Please advise on how to solve this problem.  I note that this is not a problem once you get a.25.

  use .toFixed (1); After the value

• Assign variables with a loop for

  Hi all

  I'm variable loading for a quiz of xml using Ajax:

  $.ajax({)

  	type: 'GET ',.
  	URL: "loadVars.xml",
  	data type: "xml."
  	success: {function (xml)}

  The data that I get are the following:

  word1 = $(xml).find('word1').text ();

  word1distracter1 = $(xml).find('word1distracter1').text ();

  word1distracter2 = $(xml).find('word1distracter2').text ();

  word1distracter3 = $(xml).find('word1distracter3').text ();

  There are about 20 words and I want to use a loop for assign variables on both sides of the equation.

  for (var i = 1; i < 20; i ++) {}

  What's the syntax? I tried:

  "word" + i =

  eval("word'+i) =

  etc.

  Any help much appreciated.

  OK found!

  window ["word" + i] = $(xml).find("word"+i).text ();

• How to write a large amount of measurement with the function 'Write to the worksheet' results in an Excel file?

  I'm going to measure more than 100,000 SAMPL and I write in a document. I would use Excel to present much more easy, but the problem here is that excel can have only 60 000 samples. also use text file is not the desired one.

  you have a solution that helps me?

  Excel 2007 gives you 1 M lines. Can update you your version of Excel?

• I already have a monthly plan with Adobe and I use Lightroom on my Macbook to date. I just got a new iMac from Apple and I went to the Adobe site to download Lightroom on the new desktop, but I can't understand it. I'm going along in circles! H

  I have a new office and myself can not understand how to download Lightroom, without registering for an account or a new trial! I have a monthly plan with Adobe already and have been using Lightroom on my laptop. Can anyone help please?

  1. Sign in to your account on www.adobe.com
  2. Download and install the cloud desktop application
  3. Using the cloud desktop application, install Lightroom CC 2015.3

• shorten the few lines of codes with a loop for?

  Hello, I have a few lines of code I want to shorten.
  
  , Someone has any idea how to make this right?
  
  Thank you!
  

  :

• How can we localize the dynamic data coming from the server?

  I searched the forum but did not get the answer.

  For local data we can put the location of this data type in file HR Manager, what the text resulting from server...?

  Any idea? Thank you.

  You need to do on the side server. Obviously, the server protocol must support in a certain way.

  You can use Locale.getDefault () to get the locale default application, from which you can extract the language, country and variant codes.

  [Edit: well, there is no need to do this way.] The server could, for example, provide a response that includes all locations. You can select that one to use on the device. But this would not be my first choice of how to do].

• Saving files from After Effects to CC for use on other machines.

  I am very very new to After Effects, so I'm sure there is a simple solution to my question.  I recently attempted to save a file from After Effects on Dropbox to transfer easily to another machine, however when I went to open this file on the new machine, several documents in the file, it was missing (png, fonts, scripts etc...).  I suspected that the reason for it is because the png and the fonts were used by AE as they were stored on the original machines and have not actually imported (or copied) in the AE file, so when I went to open the file on the computer again the files were missing that they were not installed on the new machine (is this correct?).  If I record the creative cloud AE files will be I experience this problem? I'll be able to open the AE files on another computer that does not have fonts reference, PNG, jpeg etc. available?

  Thank you

  Yes, AE projects contain only references to external resources. That's why you should pack in full e.g. usind the option collect files. The procedures do not differ to any method that you use, so you better get used to and organize your work in a way so it can be transferred easily.

  Mylenium

• text boxes created in the end loop for using DIFFERENT fonts!

  I have a loop that creates videos with text boxes inside of them, all inside an accordion component. Basically, the code performs the Accordion with content navigation.
  
  Anyway, the strange thing is that text fields that use TWO different fonts! How is that possible? Even if my TextFormat fails for any reason, must not then fail because ALL created text fields and not only some (and why it fails)?

  Well, I just found that it works when I use instead of setTextFormat setNewTextFormat.

  Otherwise, it works also when I place the setTextFormat * after * setting text.

  I should have read the documentation before asking here :-)