write to the folder measurement - create or replace with confirmation

Similar Questions

• Why my saved documents appear in a library, as well as in the folder I created specifically for this document?

  In all series of Windows 2000 and Vista I could make a folder, click and drag a document I had saved in my documents, in this specific case.  In Windows 7, you have the libraries.  In the library named My Documents, I save a document and then make a folder to place this document in.  When I drag the document saved in the folder, it's now in both places.  I want the document to be only in the folder and not in My Documents.  It makes it more confusing and harder to find what I saved.  I'm very organized and when I find something I want in one place only.  I tried following the steps of your help in Windows 7 and what I had lost, and it took me hours to find and retrieve.  I do a lot of genealogy and save these images like the pages of the book, death certificates, Census pages, etc.  I have folders for each of the categories I have to put my data found in.

  I want just the data that I saved in the library named My Documents in one place, a specific folder, I created.  Not displayed in the library, as well as in the record, that's two places the same item of data is then saved.  Where all my files appear in the library named My Documents and I can open the file and find my data easily. If I delete the data in one place it automatically deletes it where ever else the same data is stored. This double economy takes up space on my drive hard but, making it harder to find what I saved.  It's very frustrating.  What happened to just drag file and data automatically moves to the location that you specify and remote where you drugs.  I don't like this feature in Windows 7.  It is too complicated and causes a lot of confusion.  I'm not a computer teckie and dislikes change my system.   How can I fix it?

  It's what you did in Windows 7, and what I end up with.

  Library

  My Documents (why do two places named My Documents?)

  My Documets (my first data here) (what drugs and has dropped to a specific folder, it should go away from here and only appear in the folder)

  The folder I created. (data from drug and dropped in the file, the copy of the saved data stays in My Documents, the two places, why?)

  No duplicates are created, you are simply watching the same file from two different angles.  I know this response is long, but it will explain...

  The libraries are not different records or specific sites.  They are in fact just combined views.  Put literally, they work like this: when you open your document library, it performs a search of two locations: your documentsand records of public documents , then you show every file or folder, it finds in these locations.  The point is to give you a point of view combined all documents which you interest, wherever they are.  If you have documents on a network drive or an external hard drive, you could say the library to get those Word files and include them in the combined view.

  When you save something in a library, the library puts it right in the default location (in this case, the default value would be something like C:\Users\John\Documents) and it starts to appear in the result of the research of the library.  If you delete something, you remove the original: we never two copies, or whatever it is, the library is just there to combine several locations to make it easier to see everything at once.

  You think that you have no use for it - and you could very well be right.  If this is the case, just use it normally and don't bother not including additional folders in the library.  That is to say, just pretend that your document library is your Documents folder.

  I, on the other hand, use it like this: I have a lot of movies, TV series, video clips and other video content.  So he took several hard drives.  I said to my video library to show all these places so that I can browse all my movies from a library, rather than to try to remember which drive a particular show was performed.

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• I need to create a link with confirmation...

  Please I need help o this:

  I need to create a link with confirmation, this means after by clicking on the link, that's not redirects to the next page, but it shows first a question like "Are you sure that you want to go to page XYZ"? Yes / No. If you click 'No' then the message disappears just, if you click 'Yes', he goes to the next page...

  Any dea? Thanks in advance...

  XYZ.php
  

• Open to create problems replace with the recording of file templates

  Hello, I had a problem with the function open/replace/create. Could you please specify each function, how it works? As you can see in my file, I try to record in the specified path. The values appear in the text file, but when I change some values in the course of data, it replaces the old value, it has been. I want to have all the data in a single file until I close and open another file for the operation.

  How can I do?

  Thank you

  I think that its programming in-> file-> advanced file io

• Cannot write to the folder C:\WINDOWS during repair or even Recovery Console

  The security on my folder C:\WINDOWS on my XP Home Edition somehow got changed to allow total control over a normal users (not administrator), and * only * this user - that is to say, no one else appeared in the list of users who have access to this folder.  I discovered this in the context of trying to figure out why the windows updates work is more due to the file permission errors.  To try to solve this problem, I changed the security for the C:\WINDOWS folder to 1) completely remove the normal user authorization and 2) add full control permissions to the accounts of two administrators on the computer.

  Unfortunately, next time I restarted the system, it would no longer boot properly - it shows a black screen with a white cursor, and that's it.  I then tried using the Windows XP Setup disk to repair the installation.  However, when the repair is executed, it is said that 'Setup cannot copy the file xxx.xxx' most every file it is trying to install.  It may even be all he's trying to install files.  The first file is complains about is vgaoem.fon and I tried to skip all files that fail, but I gave up after a hundred and it was still only about 25% complete.

  Then I tried to go to the Recovery Console to see if I could tell what was going on.  I noticed that I can copy files in C:\, but I can't copy anything in C:\WINDOWS or one of its subfolders.  According to the documentation, I should be able to copy files in C:\WINDOWS--sinon, the Recovery Console would be pretty useless.  My best guess at what happens is that the permissions for the folder C:\WINDOWS are somehow restricted such that even the administrator is unable to write to the directory.  The ACL apply in the Recovery Console?  I can't use the ACL commands in the Recovery Console, so I can't say.  Perhaps there is a registry setting that causes this problem?

  I really want to do a new installation I'm losing all my data (in addition to having to reinstall all my applications).  Any ideas?

  Thank you.

  Steve

  Steve,
  Thanks for posting on the Microsoft answers Forums.  Here is a link to an article that will guide you through to reset the security settings on your system.  This gives a try and let us know the result.

  http://support.Microsoft.com/kb/313222 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Turn * off * PDF writes to the folder of the Package

  When I have the package files in InDesign CC, it automatically writes a PDF file in the folder of the package. I would like to disable this option. Does anyone know how?

  Thank you

  Tim

  It's a checkbox in the dialog box for packaging.  Uncheck the box; It's a sticky choice, so you'll only have to do once.

• Quickie: Write to the file measure VI, how to create the new file?

  I use the writing on measurement file express VI in my code and I plugged into it a control that sets the location where to save the file of measure

  The only problem is that the file of measure must exist first! I cant for example, from the Control Panel, click the directory to browse box, navigate to a folder and type a name for the file. It just says: file not found! It's like the control file directory opens a file to save in, rather than creating a new file to this location

  How can I solve this?

  AlexMason86 wrote:

  Project attached

  If I go into the navigation options, what should I do? Just selected new and existing files?

  Uh, Yes. Also, there is a help button.

• Any way to recreate a link to 50 pictures at once without matching filenames? that is by replacing the links existing and just replace with new ones?

  I wonder if this can be done with a script in InDesign. I work in 2015 CC and am aware of mobility + select all the links in my control panel links, then click the 'Repeat' in order to recreate a link to each one in succession. But this method still requires me to click on the link I want 50 times, in order to link to these new images in the dialog box that appears.

  That I work with, it's an InDesign file that has 50 different related images, all the same size. They are all small JPEGs arranged in a grid. I create a PDF of each sheet of 50. I need to make several sheets, and each of the 50 images is unique and should not be repeated, so filenames are all unique, so why InDesign is unable (and in this case shouldn't) link to each of them by using the option 'search for missing links in this folder. In order to make each sheet, currently I have to select each JPEG link in the links Panel and manually connect it to a different file name, is not equivalent. It takes me some time.

  Is it possible to automate this process for I can select all 50 instances of links essentially and force InDesign be reprinted at 50 other, even in form and oriented files with no corresponding names, is one fell swoop?

  Hope that makes sense. Until then I will be here by clicking on

  This is easily achievable with data fusion. You must copy your file in an excel worksheet names and the column with the name "@ at the beginning, if InDesign will be acknowledged that they should be images." Then set up a module on the page, and you'll be ready to go.

• If I copy the folder "LCD", Tomcat will start with socket errors

  In the documentation , it is said that when you create a new application server side, you can start by copy folder "webapps/lcds. I did, but then, Tomcat starts with a few socket errors:

  [LCD] SocketServer 'my-rtmp-SocketServer' could not validate settings desired for BindSocketAddress socket: 0.0.0.0:2038

  java.net.SocketException: unrecognized Windows Sockets error: 0: JVM_Bind

  [LCD] SocketServer 'my-rtmp-SocketServer' could start.

  flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound to the port. Please ensure that several points of endpoint applications are not configured to use this same port.

  I'm doing something wrong?

  Thank you

  Borek

  What is happening is that you have found a port conflict for the based on the socket NIO and RTMP endpoint points used in the channel definitions in services-config file. XML of your new web application. The problem is that you have end points related to the port in the network of LCD screens and your new web application.

  You can deal with it in two ways:

  Option 1: In the file services - config.xml, look for "RTMP" and "IAN" to find the definitions of strings and to change the port numbers for something slightly different from those used in the LCDs web app.

  2 options: Move the LCDS web application out of the image so it does not get loaded and just use a template for the future web apps. If you do not use it for all your development, there is really no reason that you must load.

  I'll add a note about this to the documentation which speaks of the LCDS web application using as a model.

• How to write in the csv file - what's wrong with that?

  Hi all
  
  I created a view that makes all kinds of calculations, now I need to write the output in the csv file. How can I do this through a procedure? Sorry I've never had to create a csv file before and this is my first time.
  
  
  Thank you!
  
  Published by: user5737516 on November 18, 2009 09:47

  See:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1992907061984
  (points to several other links)
  and/or
  http://tkyte.blogspot.com/2009/10/httpasktomoraclecomtkyteflat.html

• HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

  SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

  any advice or assistance would be greatly appreciated.

  Thank you

  Alex

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• What is the process to create WiFi network with laptops?

  I want to connect several laptops within our own created WiFi network. So please guide me on this network to create and add portable computers in this network that will generate.

  Hi priyagayatri,

  Welcome to the HP community! You might be able to do what you are looking for, but this will depend on a number of things. I will need more information from you. What is your product number? What operating system do you use?

  Find your product on a laptop number:

  http://support.HP.com/us-en/document/c00033108

  Find your operating system:

  http://Windows.Microsoft.com/en-CA/Windows/which-operating-system

  Thank you

• How to prohibit check-in if the folder has already main file with such a name?

  In Folders_g if you tried to insert 2 files with the same name in a folder, you got an error, that there is already a file with such name. In the context of records will be inserted the second file, but it will be renamed "copy of...» ». Is there an easy way to return same functionality as part of records, who was with Folders_g and simply ban chek-ins?

  It should be available in the workbook

  <@dynamichtml std_checkin_form_start_extra@="">

  <$include super.std_checkin_form_start_extra$="">

  <@end@>

• Error with the function "Open/create/overwrite file" with cancel button

  I have attached a very simple VI who embodies what I want to do with my function to open the file. I just want to stop the rest of my program (theoretically embedded in the Structure box) to run if the user deigns to do not to specify a file location.

  However, if you click on the button cancel an error is produced before the rest of the program is running. If ignore you the error and continue, the "canceled" properly true made variable and the Structure of business runs correctly. "" I just want to remove the error message given to me by LabVIEW.

  Any ideas on why or how?

  Read the help of LabVIEW on automatic error handling.

  In your case, you can just wire the output of cluster of error to the structure of your business.