WriteFile() error: the handle is not valid (Dreamweaver 07.01)

Similar Questions

• error code: win32 error code returned by the print processor: 6. the handle is not valid.

  When I try to print to a network printer, the print job does not print anI getting the error code: win32 error code returned by the print processor: 6. the handle is not valid. All ideas

  Hello

  In this case seems to be with the corrupted printer drivers.

  Follow the steps below to reinstall the driver.

  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  2. find the icons that are associated with the printer, and then remove them.

  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.

  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  6. try to remove all related printer software.

  7. then download the latest driver from the printer manufacturer's Web site.

  8 install the driver.

  All the best!

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• When I turn on my computer I application failed to initialize x 0 800700006. The handle is not valid.

  My computer is running very strong. All the folders are empty. And when I try to run clean up or programs of pc health they stop in the middle and say they can't shut up. I've lost all but 4 my desktop icons. they simply disappeared. My files are all empty. I lost all my downloads, documents and photos. Help!

  It looks like windows Defender may cause this error. If you use it, you can try this

  Or disable it, if his permit. And install this instead

  You are upgrading from a previous version of windows?

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• -1074130544 the session handle is not valid.

  I'm using LabView 2011 on Win7.

  I'm working my way through the part of the "verification Procedure" of the "NI PXI-4071 calibration procedure.  Step 3 of the "Call the niDMM Reset VI." verification procedure and display Figure 1. The device, the NI PXI-4071, OK appears in NEITHER-MAX (Figure 2) and works well with the program 'NOR DMM Soft Front Panel'. When I run what I think is the correct code, the error 1074130544, "the session handle is not valid." appears. The BD and FP are shown in Figure 3.

  Hi Ed,

  If you want to call niDMM Reset, you will need to provide a descriptor of instrument rather than a descriptor of instrument.

  To start a session to your DMM and generate a handle of the instrument that you can use with other functions OR DMM, you must first call niDMM to initialize or niDMM initialize with Options.  You can wire the 'Dev1' to pin 'Descriptor of Instrument' and the function returns a handle of the instrument.  You can then wire the "instrument handle" PIN to pin "handle of the instrument" on the Reset niDMM VI.  Whenever you initialize a session to an instrument, it is also to close the session by plugging in the handle of the instrument to a function niDMM close .  The code snippet below shows what I described:

  

  I have also included a Simple VI of error handler to report all errors that occur.

  In addition, it seems that if you call niDMM reset with the default values instead of niDMM reset.  If you have not assigned any of the default values user defined logical name calls then both of your device should be functionally equivalent.

  If you make these changes, you should no longer generate the error.

  Good luck!

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• VISA (Hex 0xBFFF001E) error the specified state, the attribute is not valid or is not supported as defined by the resource.

  Hello

  First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.

  While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.

  In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:

  Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi

  Possible reasons:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.

  I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:

  

  Any help is appreciated.

  Thank you.

  I suspect the redirect property. Try to remove it.

• ThinkPad Tablet 2 - error 2201: UUID of the Machine is not valid

  I just unboxed my "nine" Thinkpad Tablet 2 and got an Error Message 2201: UUID of the Machine is not valid.

  Network card, sound card, USB camera don't work at all. They said that I have not installed drivers for these devices. Because I can not connect to the Tablet, I'm unable to install a driver for them.

  Can someone guide me to solve this problem?

  TKS you all!

  Yes, you will need to send the machine back for the service.

• Error: the file is not a valid Java code file

  Hello

  IM new in the development of BB, so bad to describe my problem step by step:

  -First of all, had installed jdk-1_5_0_14-win, BlackBerry_JDE_4.6.0, j2sdk-1_4_2_18-win, Desktop manager 4.6

  -Open BB JDE, create a new workspace

  -Add a project HelloWorldDemo.jdp file (located in the sample folder)

  -Debug the application in the Simulator (9000-JDE) without any error

  -Construction of the project and generate the .axl and .cod files

  -Try to install this app (HelloWorldDemo.cod) in my device with error

  C:\Archivos programa\Research in Motion\BlackBerry JDE 4.6.0\samples\com\rim\samples\device\helloworlddemo>javaloader u load HelloWorldDemo.cod
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connected
  HelloWorldDemo load error: the file is not a valid Java code file
  7832 bytes sent to ~ 15664 bps
  Disconnected

  -Also try to install the application with Desktop Manager and the .axl file, but show this message "a fatal error has occurred while updating your software to devices." Please try again ".

  My device is a Blackberry 8700

  Software: v4.1.0.351

  Help, please!

  Thank you!

  Thank you!! Problem solved.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

  I cannot open photoshop, I get the error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

  Hi malloryf,

  Greetings!

  Please reset the Photoshop preferences and try again.

  Here's a similar thread: Re: preferences was not valid.

  Concerning

  Jitendra

• ITMS-9000 ERROR: "this set is not valid. The CFBundleVersion key value...

  Hello

  I tried to submit the app store my V27 revision (1.0.5) instead of V28 (1.0.2) for Ipad 1 compatibility but I get this error:

  ITMS-9000 ERROR: "this set is not valid. The value of [3.2.4.6.88575] CFBundleVersion key in the file Info.plist must contain a newer version than the version previously downloaded [3.3.1.3.8

  How I change the CFBundleVersion?

  Thank you

  Support DPS can however help you. Please log in to your dashboard DPS https://digitalpublishing.acrobat.com/SignIn.html and you will find the coordinates at the bottom of the page

• Advice on the resolution "Error #2004: one of the parameters is not valid."?

  Hello

  Sometimes my graphs of objects returned by a remote call can be very deep and complex.  As you know, if you have not a reference to all the types of objects returned by a call to distance, you get this error:

  "ArgumentError: Error #2004: one of the parameters is not valid."

  So, I know what the problem is, but I often have a devil of a time finding - this who-class/type on that it chokes.  It usually involves a long process of trial and error.

  I was wondering if I forget what is obvious or if someone has a method to determine what classes he chokes on?

  Thank you!

  Usually, if you are using a debug version, you will get a record of the complete stack with line numbers.  I find those useful.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

  I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

  When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

  Any suggestions?

  Thanks in advance!

  Windows Update has nothing to do with your questions.

  Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

  THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft