Writing information to data card to contact Record

Similar Questions

• Cvent Feeder should send information to a Contact record or a custom data object?

  We use Cvent to organize our event series each year. The event series contains ~ 18 events each year. This will be the first year we try Cvent trough to connect the information that we collect to Cvent and push it in Eloqua? Should push us to a record of individual contact or a custom data object?

  My first inclination is to match to a contact record. My reasoning for this is that the event creates many new perspectives and we want these people to become contacts in Eloqua, so that they can be put in feed and then also synchronized in Salesforce. Our Organization has also had a very limited use of custom data objects so far, we're still learning the system, and it's so advanced capabilities of segmentation may still be beyond our capacity at the moment. My fear is that if we were to store data of Cvent in custom data objects, data objects that can be linked to a contact record because they are quite new perspectives there. On the other hand, a lot of information from the event record (beyond names, emails and addresses) is really intended for a custom data object. Any advice as to how we should do that?

  My recommendation is to use a custom data object. -Especially if you store specific information about the event.

  While I'm not 100% on the configuration of Cvent, you probably have the ability to set the default mapping that relates to the LCO to the contact table. -It is usually an email address

  Otherwise, you also have the option of specifying the parameter 'Mapping the default used in Upload' for the CDO. -Make sure it is set up properly as well. -Yet once, it is usually to address Email

  As long as they are set up correctly, the system will automatically create a new contact for you if the 'E-mail address' the participant Cvent is NOT already a contact Eloqua... More importantly, if the 'Email address' the participant Cvent is already a contact-> a new contact will NOT be created. (Instead, the existing contact will be related to multiple records LCO)... That's what you want

  This way don't unnecessarily create you more contacts than you need to.

  Once you get this sorted out, you'll be amazed how it is easy to start to use these CDO into Segments.

  Let me know if it helps.

  ***********

  Chris Continenza

  Senior Marketing Automation Consultant at Tegrita Consulting Group

  Tegrita Consulting Group

  Web: tegrita.com

  Phone: 1.800.771.3308

  E-mail address: [email protected]

• Help! How to upgrade a contact in a folder of data card record in the E10?

  Our upgrade was yesterday. I missed a critical use case in our planning of pre-upgrade. I need help, please.

  Here's the use case:

  1. a system of third party feeds campaign pot directly through response data to an object custom data Eloqua (this always works)

  2 al ' E9, the CDO - via the data stages of transformation of the map Services - has been captures the data, save and update the Contact table (no longer)

  3. then, he drew the call of SFDC integration to associate the record as a campaign response (it's so more work based on #2 no longer works)

  In E10, the rule to update in the stages of processing of data card Services does not allow data to be updated to the Contact table via a rule update - action is no longer an option. (I totally missed the impact of upgrading to update rules - sigh).

  This is where I need help. How can I build this works in E10? I'm testing it even as I write this, and I see some results by setting the option "Domain mapping" in the ORDER of the Contact table. Oddly, I can't map the field Email Address - it is not giving me an option to do so. In addition, this option does not large text fields and I have one of those in this data set. I feel I'm missing something, but I'm so far in the weeds now, I'm not sure what it is - any help is very appreciated.

  Best,

  Kristin

  Hi Kristin,

  Updated Eloqua10 and Eloqua9 rules have a different set of options for the update action. It seems that in this scenario, we need to fix the second case where the data card Service was runs a update rule to map the CDO data for the contact table. In the custom data object module, we have an option called mapping fields. You can use this to get the same results as the update rule by mapping the CDO data directly to the contact table on the entries of new & updated data up-to-date card the. Once this change is made, the workflow remains in what concerns the integration association and campaign SFDC will continue to work normally.

  

  I hope this helps!

  Kind regards

  Jubair

• How to remove messages in Exchange 2010 by dates. in a group and exclude the Contacts, record retention and calendar

  How to remove messages in Exchange 2010 by dates.  in a group and exclude the Contacts, record retention and calendar.

  I'm deleting emails from users in a group called MX_Purge file. I need to delete the emails date xx/xx/xxxx to xx/xx/xxxx.

  I also need to exclude the excluded the following records 'calendars' folders 'Contacts' and 'Retention '.

  The server people hang around more in the TechNet forums, if you ask, you will get a much better response:

  http://social.technet.Microsoft.com/forums/en-us/Exchange2010/threads

• Update of "last Web site visit Date and time" in the Contact record

  Hello world.  I want to see if I can find a way to write a program that will automatically update the field "last website visit Date and Time" in the contact record Eloqua and if they have a SFDC ID drive, push this stamp to SFDC.  I do not make a rule to update or something that will allow me to transmit the data of visitor correlated in good contact record.  Any suggestions?

  Thanks to Pierre in customer support, we now have a solution for this.  The User Guide for the database management (page 28) has a way of creating a progressive input signal to a program that will update web visitor info cross-object of the contact record.  My program is running and works perfectly!

• Transfer data from Contacts for data cards in the program generator

  Does anyone know how to transfer data from contacts in data cards in the program generator?

  We have a case will be company requires to do something like that.

  If this is not possible, what are my other options to accomplish the same outside the Builder program?

  Hi Nader

  You can simulate a Send shape using Connector of cloud within a program. The stages of processing the form would be set to update object data card with the data of the form.

  We can discuss it further if you wish.

  -Zainab

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• Custom object filters (data card)

  How do you run the filters with data cards?

  We have Contact information stored in the Contact record, and our products are stored against cards of data with the email address as a common link between them.

  I need to run reports for some products, that lists all the products selected for some countries.

  Kind regards

  John

  He discovered. Using the "field of the linked object Custom' and 'A related custom object' in the contact filter allows filtering in the game of the data card.

• Toshiba crash with 3G data card

  Hello

  hope someone can advise. I've been using a Vodafone 3 G datacard in my PCMCIA slot in my Toshiba Satellite A75-S226 [purchased in the USA] - unfortunately on the first night of use - it has been problematic.

  at first, I loaded the software and inserted the card and hey presto, I was online on the wonderful web without a phone in sight line.

  After only 20 minutes - the pc crashed - complete blackout - rebooted as I thought it was a stop of the battery (not on the AC at this point).

  It wasn't. 12 the cell breaks down - screen sometimes black, sometimes white screen - in almost every use of the card 3G - sometimes, it crashes when the card is inserted, sometimes it works and I'm in line for one minute (or 5 or 10 or 15 - who knows) but it still crashes

  I removed and re installed the software several times, spoke with vodafone and installed 3 alternative versions of the software - 2 old and more recent 1 (later).

  I tried another card 3 G on my laptop and it crashed. I used my card on the pc of my neighbour without difficulty. ERGO - the problem comes from my pc - and it is an interaction with the vodafone card and/or its software.

  This isn't somehow due to overheating, as the shutdown problems mentioned on other threads seem to indicate - if my laptop runs perfectly and can run for hours to child's play.

  I'm not sure is the extent of the use of 3G data cards, but maybe someone can advise.

  PS I am the person most untechy to join a computer forum - so less jargon and more explanations would be useful - think of me as your old uncle doddery, but with more hair

  concerning

  stoky jed
  London

  Hello Jed

  Unfortunately, this is a specific problem with external Toshiba no product, and in this case, I believe that Vodafone people have a lot of experience with troubleshooting. Try to contact them.

  Otherwise, you can use advanced search option and search using the word VODAFONE. As far as I know there must be a few topics with the same or similar issue.

  You can also check the knowledge base on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2 Toshiba site and Vodafone as searchtext. Check it please all documents. I hope that you will find useful information.

  Good luck!

• Clear a field of data card/CDO

  Hello

  We are working on sending emails that will have a merge field to a data card/CDO object that is sometimes filled out and sometimes not; merged field of emails are sent through program generator when merging field no those are batched. After the merged field email is sent from the Builder program, we want to clear this field on the data card, so that if we batch email from contact with another email, the merger of field will be empty and not present information completely foreign to the emailed batch. Is it possible to do in E10? I can't find an option for it in the program generator. The only work around us would think has been implemented the merger of field as a piece of dynamic content and add a contact field that gets checked when the merger of field CDO / Data Card is necessary and not controlled when it's not like this can be done in the program generator.

  Hi Allan,

  If your goals is to update the field and future data communications player card... I think that there are few options, but the one I can suggest the use of the program generator.

  In the program generator.

  Create a program that takes the contacts it is a member.

  1. check if the email you want to send using email that address data slag is sent? If Yes

  2. take contact with Cloud connector for submit and add static value as empty (Leavve it blank)

  Form...

  3. create the form and map all data fields to a custom form to this exact object with a value field empty

  4. use and field to future communications drive additional Fusion by email.

  I would like to know if this helps or you are looking for.

  Thank you

  Amit

• Data cards

  Because we have certain forms on another system which then do not appear on the filters for submission of form in Eloqua (problems of lead scoring where we are scoring on the recent submission of a form), our solution was to put a stamp on date on remittances form. To do not use contact fields, for this, we have created a data card set of fields for all forms that we stamped with a field of email address mapped on the same contact field, allowing the link to the contact record. Then we put two stages of treatment in each of the relevant forms, the first applying a rule to update, date on which the area concerned in the stamps of cards together, data the second creating data cards together. We have implemented this in two of our facilities, in one, he works for the most part (although with a few hiccups) and for other so far it does not work at all (don't know why, it is set up exactly the same thing). I referred a case with Eloqua about that it could be a bug or problems with how we created it, but I was wondering if anyone had tried something similar and had problems or if not if people had other solutions suggested at the date stamp requirement?

  Any ideas/suggestions gratefully received!

  Hello

  I managed to find a solution for the problem that I had, in collaboration with a colleague and Eloqua support. Basically, the problem was that forms processing steps are set automatically with the update rule the first date stamp, then the creation of the data card, while it should be the other way around. Because there is no way to replace the order Eloqua automatically the processing steps, the Eloqua provided supprt solution was to put the processing stage data cards create in the original formula, and then republish the data to a new form and the new form of repost in the rule to update from the corresponding date. Maybe not the method 'cleaner', but in the end, it works for us and does not contact fields, so I'll call it a victory!

• Data card Vodafone made black screen

  I started using a vodafone data card to access the internet, but if I connect the screen goes black and I can't see anything, can I do to solve this problem.

  Hello frome

  In my opinion you should at first contact Vodafone support and ask them if this problem is known or not. If you use Toshiba devices try to contact manufacturer first. They have more experience in troubleshooting.

  Good bye

• 'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  iPhone OS 9.2 6.

  I already tried to delete information about the person identified as "my card". Because the phone think it is 'my card' delete the contact and/or modify the information. does not work.

  Create a new contact with your correct information, who like 'My card' to:

  Settings > Mail, Contacts, calendars > Contacts > my info

• I can change my card on Contacts app in OSX El Capitan.

  For some reason any my map have incorrect information, but I edit cant them... for example, e-mail is incorrect and appear grayed out and I cannot edit or delete.

  I need correct information (especially email)... Calendar App can not send me e-mail notifications if my card information are incorrect.

  Hello ViktorVera,

  I see you are a new user here in the Apple Support communities - welcome! I hope we find you often contributing in the future.

  My understanding is that when you are in the Contacts application on your MacBook Pro, you select your card, and then click the Edit button, you cannot change the information on the map. Is this correct?

  Since this issue seems to happen only with a single card, I suggest that you create a new contact card in Contacts, fill in with your information, and then make the new card from your "me" card and then delete the old card.

  This article explains how to create a new card in Contacts - Contacts (El Capitan): create a contact

  This article explains how to make a your different card - Contacts (El Capitan): set up your contact card

  And it shows how to remove the old contact - remove contacts - Contacts help

  Thank you for using communities of Apple Support.

  Secure computing.

• How to use the modem (2 Mbps) wired ADSL & 3G data card services to large internet wireless broadband (7 Mbps) in Windows XP at the same time?

  Hello
  I have a (2 Mbps) wired DSL modem and internet connections broadband wireless (7 Mbps) of 3G data card.
  When I use these internet services individually, they work very well.
  I like to use these services wireline & wireless internet connections at the same time, so that I get the total speed of 9 Mbps.
  When I connect and try to use these internet services at the same time, I can't go through it.
  Please inform how to configure Windows XP to do this?
  Thank you
  -to swim.

  Hi dswam,

  Please provide your comments on the design of the Windows network. If you want to see several internet connection option in the future versions of Windows, you can submit your comments here.