writing of LVM

Hi all

I am trying to run the Vi attached, but after a few seconds it return this error:

Possible reasons:

Attempted to read samples that are no longer available. The requested sample was already available, but has since been replaced.

Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

Property: RelativeTo
Corresponding value: current playback Position
Property: Offset
Corresponding value: 0

Task name: _unnamedTask<7>

 


I need to start the Vi with a frequency of 1 second to write data to a file of lvm (always 1 samples per second)

Can someone help me?

Thank you

The DAQ assistant must be out of the loop

Tags: NI Software

Similar Questions

  • read several off file lvm 2D arrays

    Hello

    for the acquisition of my data, I join three tables 1 d in a 2D array. I then record several of these paintings in a file of lvm 2D, until she is larger than 500 KB. Here, I got her 'write to measure' express VI. When I'm reading the data, I have a problem:

    "the measure file read" express vi, seems to give only the first 2D table, which is located in the file! Each 2D table contains 75 values for each channel. I checked the content by drag / drop the file in Excel and Notepad. I see then all the tables, I saved in the file and not just the first. I tried to adjust the parameters in the "read the measurement file" VI as well, but nothing seems to help.

    I have attached a sample file of lvm and my VI of reading.

    It would be nice if someone could help it

    Simon

    Hello

    I don't really know which way you want to read the data.

    Do the different 2D picture belong together, which means that table 2 is just a continuation of the first?
    If this is the case, you can select 'Segment Headers' > 'No headers' in VI 'Write to file measure. "

    Then, select "File as read": read generic text file and adjust settings accordingly.

    Use the function 'Now read file' to test the settings.

    In addition, you may need to modify the indexes for the table to Index in your VI.

    However, this method has the obvious drawback of losing the header information.

    Alternatively, you can save the data in a PDM file, instead of a file of lvm. Here the headers are treated better.

    Select 'Header only' in the writing to the file of the measurement. When your then read the data, it will automatically read all the data.
    And you keep at least the first header information.

    If each 2D table should be read separately, you must use a different approach. Please let me know, if this is the case and that I will explain later.

    Kind regards

    Corinne Doppmann

    Technical sales engineer
    National Instruments

  • 1 error in writing on a text - installer with Application Builder file

    I wrote an installer using the Application Builder to install the runtime engine that allows any computer without LabVIEW to run an .exe program. Setup runs and installs engine race and then as a .exe VI. When it is done installing, the .exe VI opens automatically.

    An error appears when the .exe opens and says "1 error in writing to a text file". If the user clicks on the error that it can run the program without problem, it converts file formats in a file .lvm. Automatically, it generates a new file name and saves the file in the same directory, but with a different name.

    Why did it only happen when opening first upward? The program tries to run when it automatically opens? Is there a file path residual left in the program that trys to run first, before that the user put his own file path in the program?

    I am semi new to labVIEW (a few months) and that nothing shows that would create this error at the beginning of the program.

    Thank you

    Hi Scott,.

    Well, you could model a little VI and turn on debugging highlighted to test your idea!

    THINK THE STREAM!

    How a Boolean entry should WAIT for the action of the user? It should be read according to the stream!

    What this small pseudo-code:

    REPEAT
    Wait (50ms)
    Until the button

    Or how about an event in the user queue structure?

  • Problem writing data analog and entry of informed

    Hi, I created a labview program that acquires 3 analog inputs (2 current and 1 tension), encoder out of whack angle and 4 temporary sensors. The Analogue inputs record against lunatics of an engine angle, once the engine has reached the point dead high simulateously in a single file. In another temperature record since signals file they are a lower sampling rate. Both files at the same time record by using the structure of flat sequence to the duration of the pulse encoder TDC events. The program works well with simultaneous recording.

    However, I believe that in the file of analog inputs, the current readings are by crank angle but channel voltage readings are not. There a lot of zeroes inbetween pressure readings as if DAQ is not intervene for the tension. I can't understand why my program does that because the analog all the readings are in the same time of the sample and analog read the task.

    I tried a program separate labview using only express DAQ and have the same 3 channels and saves the data in a file of lvm - it works even at the same pace. I do not wish to use Express functions in my program since fast flow and writing, he will miss values due to the explicit functions opening and closing of files (explicit writable) and creating the same physical channel (in daq express).

    Please can someone help?

    I have attached my program and a sample file entry.

    Thank you very much

    Notay

    I think your problem is that you are indexing column 2 for voltage instead of rank 2. That's why you have only three elements in this table in the cluster.

  • writing data to the file of measure

    Hi all

    I'm trying record rpm with an encoder in quadrature (200 ppm) in a LVM file with a timestamp of each saved value. It seems to work, except that it registers more values in the file LVM I want. I put the DAQ Assistant to save read 1 sample at a frequency of 1 Hz. However, when I open the file LVM generated by writing custom file Express VI, sometimes I get 42 values per second, sometimes I get 13 and so on. If I don't get a constant number of measurements per second. How can I specify just measure of folder 1 per second, or 5 measures and so on?

    I'm using LabVIEW 2011. The encoder values be read as a frequency and then converted in rpm. Thank you! Files and images attached.

    Your Express VI is not configured to play at 1 Hz. The synchronization method is the default value, which is used for the reading of the frequency as you do. This basically means you're sampling on the rising edge of the input signal, then you're really sampling rate at the same rate as your frequency.

    To do what you want, you can change to mode 1 sample (on request) and add a 1000ms waiting your loop.

  • How to change untitle about writing about a measurement file

    How to change without title, untitle1... about writing about a file of measures. LVM

    REMOVE the convert Dynamic data.

  • Retrieve a single value from a file .lvm

    I have a large batch of files of worksheet whose name is a timestamp. I am writing a program that will get the value of a specific cell (the same cell in each file), coupled with the timestamp and each of them as a pair of coordinates, then save in a master spreadsheet. The goal is to extract a point each of the 700 files I and compile them into a single file.

    However, I've never used Labview to read the files before. I saw some stuff on how to read an entire worksheet in a table, but I was wondering if there was a way to say to Labview to look into a file and extract a single value. I open .lvm in Excel files, so, in my mind, I would be taking, for example, cell D2. Is this feasible? Should I read the entire worksheet in an array and use the index to pick it up on the table? If I do, how I would specify cell J2 as an array index (I have no experience with the berries in Labview either). In addition, if you have any tips on how to record easily 700 pairs of coordinates, that came together in the order, to a single spreadsheet, that is my next task.

    Essentially- I need to extract a single value of a spreadsheet in, ideally, the simplest possible. In addition, pointers on how to save the numbers gathered at each iteration of a while loop to a single worksheet are welcome.

    Thanks in advance for the help!

    FYI I have LabView v8.6

    You can't say LabVIEW to 'out' a specific 'cell' more you can tell Notepad to do. the .lvm files are just text files. When you open them in Excel, the column separator (default tabs) show to put the values in columns. In LabVIEW measurement file VI reading to read .lvm files. It creates the dynamic data, wrong data type that is next to useless. You will need to convert this type of data in a table by using the function convert of DDT. Or, you can use the VI read spreadsheet file. This will give you a table directly. You can just remove the specific item using the table to Index.

  • continuous recording of samples in file .lvm with data acquisition

    Hello

    I use DAQ to acquire the analog signal and I'm saving samples k 1 .lvm file using file capable of writing with a sampling frequency = 1 k, samples = 1 k in continuous mode. I am able to see the data stored in the .lvm file like this 1 k samples then a few lines of words (like channels, samples, date etc.) and then other samples of k 1 and so on not worked the .vi stopped but how to save the continually samples placed in without any line of words I mean save continuous samples.

    The sequence is shown it the file attached is .lvm.

    Thank you.

    It would have been preferable to set the code when you set up the Express VI. You just leave the Express VI in its default settings? Have you tried to change the configuration to one header only?

    Your choice of an Express VI means you have limited options. If the options do not match your needs, you will need to use lower entry level file functions.

  • How to read a comment from an lvm?

    Hello

    I created an lvm using the writing on file express vi measure and I added a comment.

    To simplify the created lvm line was:

    test 5

    where 5 is a random value and test the comment I entered.

    My question is how can I read this comment.

    When I use the express vi can read the file, comment out

    Returns empty.

    Thank you.

    Hey epik78

    When I run your code I got the same performance your described. Try selecting "A header only" or "A header by segment" under the section headers of Segment write set in the window of measurement file and you should be able to recover this comment when you read from this file.

    I hope this helps.

    -Ben

    Engineering applications

    National Instruments

  • LVM file formatting

    Hello.

    I use writing measurement file Express VI to save my data in a file of lvm.

    The thing is, I want to change the headers in the file lvm and also to change the header.

    I've attached a screenshot of part of my code.
    As you can see, there is a large wire to the signal, consisting of different double rooms and I want to name each of them in the lvm correctly.

    I also want to add the contents of the string parts to the header of the file lvm.

    I've already read that there is a way to do it by IO classic files, without using an express vi. But I am still a beginner bloody for BT and don't really know how to do this.

    Can someone help me?

    Thanks in advance!

    Hello

    This post on the forum uses a write to the lower level spreadsheet function to save data to a file with each iteration of the loop. If you scroll down there is an add-on for the code that shows how to put some headers on the file by the use of a table.

    I hope this helps.

    Mike

  • I copied and pasted a spike in emails, he decided to leave Chinese writing and it now appears in each email.

    I took a photo for a small ad for the customer, I pasted the email that it transposed in Chinese Web site looking for writing! whenever I have create an email that appears at the top all the time can not get rid of it!

    Hi I had this problem too.
    I try to copy something else, and then you restart computer I should be working.

  • When writing an F9 email no longer displays the address book unless in safe mode, how do I solve this problem?

    I tried to search the frequently asked questions and did a search first. It did not work, what I found F9 turns the initial contacts on and outside, but does not solve the problem with the component being wrong.

    Until a very recent update (last week or two at the most) when I type writing, the contacts pane in the window of writing have shown my address book. Now it shows some kind of research, that I can't use because I have to see all the entries to see which ones I want to send an email. In some cases, I have multiple entries for a person based on their having several email for different types of e-mail addresses. Try to remember those who want DOESN'T WORK for me. I can't get this behavior in safe mode. As an alternative, I need Thunderbird to save my setting of safe mode, so I don't have to reconfigure the SafeMode whenever I have to restart windows or restart Thunderbird. I currently come in default safe mode

    I tried to remove and then install an older version of Thunderbird and the pane bad contact on the left was there. I can't find any setting to change the part of that wrong at the old I need. I would rather not try to reinstall win7 pro from scratch for this problem, assuming that would fix it.

    I am running windows7 64 bit pro

    It was very strange. Now things work properly and I don't know why. I want to thank everyone for their help. The image shows the first letter of the contact you want on screen messages write with the address list. Before it wasn't to show a list of addresses, just search options to search for address books. I think I'm more confused then I was before. I'll try a reboot and see if the message of Scripture remains fixed.

    Once again, thank you for all the help and hope that the correction is corrected.

  • at the opening of a 'writing' window there is no toolbar! and no submit button! Please, help me to restore!

    I followed the instructions in a displayed answer go to the menu bar on the screen of Mozilla and all checked. There's no composition bar in the e-mail toolbar.
    Still, there is no menu bar on a "new message / write ' window.
    I appreciate your help... This is so frustrating!

    You need carry out the instructions in the window where you are missing toolbars. In your case, the window of writing.
    Open a window of writing.
    Press the alt key if the menu bar is missing too.
    The Menu bar select View-toolbar and enable toolbars missing.

  • Clicked on writing in Thunderbird, got a whole new list of contacts with many items I did not here. Why?

    Most of the new entries seems to be people that I have either written or received mail from. My address book is last name first. Many new entries have the same names but first name first. Something is obviously by analyzing my mail file all and added to my contacts list. If I want to add a contact, I'll do it. "Don't want to do to me unless I ask."

    This a pane to the left of the space where you type a new message?

    If so, it is called the Contacts Sidebar and TB38, default to 'All address books' and it'll show you a composite, consisting of all your address book address book which one you don't know you have, known as collected addresses.

    If you click on "All address books" in the sidebar of Contacts, you will get a drop down menu where you can choose one of your address books. Personal address book could be the one suitable for you.

    I do not use the sidebar. I just start typing addresses or names and an auto fill feature offers connections to the address book.

    When this topic comes up, I often ask about the thought process behind the work of a list of names. I guess that there are use cases where you send a large number of people, including all the names you couldn't possibly memorize, a list could act as a reminder. (But there are better ways to deal with such a situation; for example dedicated address books, mailing lists, direct mail utility.)

    Another use case may be the kind of person who blindly copy fun (supposedly!) messages to all their knowledge.

    In my case, I am writing to the people and people have names, and their names are what I know them by. The number of people that I write for in reference to a particular topic would be low and the recipients would be tailored to the situation. So it seems natural to send me a message by naming the intended recipients. And it is more efficient to have the computer find my address books to do it myself.

    To manage what is happening in the collected addresses, look

    Tools | Options of| Composition | Addressing

  • pane 'send' and 'address' disappeared frpm writing (composing) window, and I can't figure out how to fix.

    The part of the address appeared by activating / deactivating the F9 key.
    The 'Send' button is still missing.

    Do not know why you started a new thread for the same problem but...

    When you open the window of writing you the Composition toolbar where the Send button?
    He has send-spelling-Attatch-security etc on it.

    If this isn't the case, have you tried my instructions in the other thread to activate the missing toolbars?

    If you have some of the bar Composition tools but lack just the Send button, click with the right button on the Composition toolbar and select Customize. Find the button send in the window that opens and he reglisser in place.

Maybe you are looking for

  • iPhone 5 s 10.0.2 update cannot use image capture

    I have a mac pro running 10.6.8. Since I upgraded my iphone 5s today 10.0.2, I am unable to use Image Capture on my mac to transfer your photos, iphoto does not work either. I get a message on my phone to the computer I chose to 'trust', then I get a

  • updated 2 34.0.5 bookmarks broke. What's new?

    can't see the subfolders to choose to put my bmark in. corect 34.0.5

  • Equium L300 cannot read Photos on CD

    Equium L300 = I have a number of CD containing photos (mainly of the high street Max Spielman and Klik photo printers) that will run on this laptop. They used to run on my old PC Can anyone help?They are cherished vacation photos, etc. and probably d

  • video capuring crashes after update camera app!

    Video capture automatically hangs (1 second) after update to motorola to 4.0.7.5 camera application other applications works correctly (google camera)

  • Cisco TelePresence SX20 with laptop

    I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to instal