Writing to spread sheets with more than single precision

Similar Questions

• Noisy HDD downloading with more than 2 Mbps Internet

  When I download with more than 2 Mb/s to the internet, I hear a noise continuous scratchin/scratching. After I stop downloading the noise disappears. It has 5000 hours working time.

  Toshiba 120 GB SATA/300 5400 RPM 8 MB 2.5 "MK1246GSX...

  Hello

  First of all I must say it is really hard to say something about it without having heard this noise you want to say.

  Generally speaking, it of normal that you hear some noises during writing or reading process of the HARD drive.
  You can test your HARD drive for bad sectors using Drive Fitness Test. Which is a freeware tool that can check the HARD disk.

• Cannot start a virtual machine with more than 1 CPU socket added

  I've set up a few boxes of ESXi 5.5 with the free license in recent weeks, they have all been without problems so far. All 4 servers have the same exact hardware

  Environment:

  Dell Poweredge T620

  E5-2630 2 Intel CPU

  40 GB OF DDR3 ECC RAM

  ESXi is installed on 2 x 146 GB 15 K SAS drives RAID-1

  Data for virtual machines store are 8 x 600 GB 10 K SAS RAID-10 disc

  Guest operating system is Server2012r2 on all virtual machines

  Installed it on ESXi 3 previous were conducted with custom ESXi 5.5 Dell without problem.

  The 4th is where I will have questions. I used the following ESXi installed just in case there is a bug somewhere

  5.5 of VMware ESXi

  ESXi 5.5 customized by Dell

  5.5 U1 of VMware ESXi

  Any version of the ESXi I use I can't have a virtual machine to begin with more than 1 CPU socket added to it. The virtual machine does not start even the VMWare BIOS. I tried the Bios EFI as well with no luck. The error message I get in the events is ' fatal error VMware ESX: vcpu (vcpu-X)-X:VM - entry failed; Valid VMCS (error code 8). The vcpu-X is always another. I have attached the log file is created. If I give the VM 1 single processor TI starts very well. I'm at a loss as to what could be the issue.

  Problem is solved. I caught another server with identical hardware, verified it worked properly, then started to swap parts between them. Turned out to be CPU1. Once this has been replaced from a working server I have not had any problems. Warranty has been appealed.

  Thanks for all the help!

• VM with more than 4 cards (how about 14 NIC?)

  I'm interested to know if someone has built a virtual machine in ESX 3.5 with more than 4 vNIC.

  I have a specific application to which we want to build two VM.    A virtual machine would have ideally 7 vNIC and the other 14 (fourteen Yes) vNIC.    Has anyone edit the VMX file successfully to create such a configuration?

  (Note: I am aware that several IP may be related to a single network adapter.)  This type of configuration is not enough)

  The total number of virtual PCI devices that can have a virtual machine is 6. Assuming you need to at least a virtual scsi controller and a single virtual video card (no more no less), the number of virtual network adapters, you can currently have is 4.

  Sanjana-

• Query to find records with more than 2 decimal places.

  I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2. 
  The datatype of the AMT column is NUMBER (without any precision).
  
  SELECT amt  FROM amount_table
   WHERE substr(amt, instr(amt, '.')) LIKE '.%'
         AND length(substr(amt, instr(amt, '.') + 1)) > 2

  Output:-
  
  AMT
  
  * 41591.1*
  * 275684.82*
  * 64491.59*
  * 3320.01*
  * 6273.68*
  * 27814.18*
  * 30326.79*
  131.8413635
  162.5352898
  208.5203816
  8863.314632
  22551.27856
  74.716992
  890.0158441
  2622.299682
  831.6683841
  * 1743.14*
  2328.195877
  3132.453438
  5159.827334
  3.236234727
  37.784
  

  Thanks

  Hello

  user1585440 wrote:

  when i inserted fee_amt as 41591.0999999999  it is displayed as 41591.1 in the output i.e,
  
  insert into amount_table (line_number,fee_amt) values (100,41591.0999999999);
  
  select fee_amt from amount_table  where line_number = 100. this query shows the output as below
  
  fee_amt
  
  41591.1
  
  The fee_amt column has number as datatype (without precision)
  
  Why it is automatically shown rounded off as 41591.1? 
  

  Published by: user1585440 on December 28, 2010 04:50

  You use SQL * more your front end?

  SQL * Plus has a fixed width to display all columns. The default for numbers is 10 characters. If necessary, SQL * Plus will be round a number or the use of scientific notation, to represent the number of the expected number of characters.
  You can use the SQL * more "SET NUMLARGEUR" to change the default view for all the numbers of orders, or "COLUMN" to set a sepcific format in an individual column.
  If you explicitly convert your channel numbers in a query, SQL * Plus adjusts the column width to whatever is needed. For example

  SELECT  TO_CHAR (fee_amt, 'TM')     AS fee_amt_d
  

  "TM" is the default format; You can call TO_CHAR with a single argument, if you prefer.

• Need help: column dimension a assoc with more than 1 level

  Hello
  
  I try to have several paths of forest for a single dimension. For example, the Date dimension should be navigable by the following hierarchies:
  
  DateDimension
  + - Calendar year
  ... - Calendar quarter
  ... - Calendar month
  ..................-- Day
  + - Calendar year
  ... - Day
  
  So, in other words, in the answers, I should be able to add 'Calendar year' to my report, view the results and then click down the calendar year-> Calendar Quarter trail-> month-> day OR calendar-> day.
  
  However, when I have this model in the administration tool, it allows him, but then I add the column in the answers and get a runtime error:
  + [nQSError: 14064] dimension [column name] column has associations with more than one level.
  
  This is possible to BO and other tools. If it is not possible in Oracle BI EE, then another alternative would be to have two separate versions of the "calendar year" added to the report in the responses, each with their own drill path.
  
  Any ideas?
  
  Thanks for any help you can provide.
  
  
  Matt Warden
  Balanced Insight, Inc.

  Hello

  I don't if it good or bad, but simply give a shot home

  In RPD create year--> quarter---> month--> day then right click on the year and select shared as child level and select level day in. Double click on the level of the year and in the path of favorite drilling choose quarter and the day in it.
  Results:
  In the report when I click on the year he takes me to the day and then again by clicking on the year I give quarter, month.

  Hope this helps and let me know if it does not work.

  Thank you.

• The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods

  They are bluetooth devices, so they work with the iPhone 5 or more.

  See you soon,.

  GB

• After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm before closing

  After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm prior to closing. FF always asked me to confirm in the past and no settings have been changed before you try tab groups. Then when I open FF it again all the tabs I had open are still there. I tried refreshing FF and erase history, but that did not work. It's almost as if FF think windows and tabs I have open are a group of tabs, and he won't let me get rid of this group. How to stop groups of tabs now that I have them? Or is there something else? None of this was going on until this morning, I played with tab groups. I was curious what it was - it's going to make me kill one of these days lol.

  Note that using "show my windows and tabs from last time" as the start setting will also prevent Firefox to display an alert when you close the window.

  • https://support.Mozilla.org/KB/Options+window+-+General+Panel

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• When we try to use our multipoint system 2010 with more than 2 users the mouse around the screen to move.

  Original title: problems using multipoint server 2010.

  When we try to use our multipoint system 2010 with more than 2 users mice become uncontrollable and move the screens themselves. How to fix this.

  Hi thomasgk,

  The issue of Windows Multipoint Server 2010, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Win7 Pro XP Mode with more than 4 cores of the processor installed

  There is a small class of Windows 7 users in a particular section.  Leave section A Win7 users with more than the standard 4 hearts of the processor installed, in some cases, several times more.  Or B article Win7 users "legacy Software".  Note that "legacy software" not only old XP/32 software but also includes some advanced technical software for which the latest version is not stable on Win7 or Vista, and which also does not work on any operating system other than Windows.  People who reside in sections A and B, called 'Goblet' hereby shall Win7 Pro XP mode.  However, XP mode currently fails to install the last step with no further comment or recommendation, for all people in the section AxB.  There is a related hotfix KB2519949 which covers the series of chips AMD 8-core Bulldozer.  Microsoft has indicated that KB2519949 is highly specific instance and emits a strong caveat.  The fix may not work and may even be unstable on some systems.  Miscrosoft indicates on page Web KB2519949 further research is necessary.  I need to install XP mode and the Virtual Machine on Win7 Pro with 2 x Intel CPU E5-2620 (24 hearts).  I would accept that XP mode can run on only a subset of my installation of CPU, but only on condition that this does not affect my full CPU installation and proper use on Win7.  This is part of my doctoral research, and the problem has delays.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• How can I associate my rt surface with more than one account of sky drive

  How can I associate my rt surface with more than one account of sky drive.

  You will need to create a new account on the computer by using the Microsoft Account associated with the other SkyDrive.

  To create a new user, open laptop settings, in the general section, click 'add a new user '.

• Can I have my HP mini 210-2080NR updated with more than 1 GB of RAM it came with?

  I have a HP mini 210-2080NR. I would really like the amount of RAM upgraded fom the he arrived with more than 1 GB. Is this possible and if so, how it will manage?

  Hello

  Yes you can, you can upgrade to 2 GB and because she has only 1 slot you have to throw 1 GB and 2 GB, put on it. I replaced the RAM for my daughter about 2 months back. He encrypted his 28 our Australian dollars and 5 minutes of my time.

  Kind regards

• Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply a different video transition effect to each photo. It might even be random effects. I see that I can apply a unique to all p transition effect

  Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply different transitions video effects by alternating each photo. It could be random effects. I see that I can apply a unique pictures transition effect at the same time, but how to apply different transitions not one by one? I could do a clip applying different transitions manually as I wish between hundreds of photos, but I would like to be able to repeat all the transitions of a new video by changing only the photos. Is this possible? Or a tool to apply random transition effects between photos? Or a way to automate the actions to apply different transitions similar to what we can do in Photoshop? Thank you!

  But how to apply different transitions not one by one?

  You can not.

  If you wish to make a slideshow with all the transitions better fantasies use something like Pro Show gold.

  Alt drag window project replaces clip/still on the timeline.