Wrong date when recording to jpg

Similar Questions

• Based on existing data when recording new data

  I am currently working on a programme who collect samples in cycles before a while loop. The problem is that the data collected within a cycle is erased before a new cycle starts, but only if more than one cycle must occur in the same trial. I joined a handful of files below to better display the problem. I tried to solve this problem by dividing the table of waveforms, the addition of each component, and their group back together. The only reason why it does not work is because the program cannot sample fast enough. How can I rectify this?

  Your data registration code will not be run until the loop stops.  You must have your function of logging inside the While loop.

  Take a look at the example of log data in the Finder of the example, or search the DAQmx with data record.

  A little more advanced topic that you might want to look for is circular Buffer.

• Text to outlines - but does not smooth when recording in jpg or png format

  Hello

  Just started with Illustrator and while it is easy to change the text to text outline (making vector), when it comes to the economy as long as .jpg or .png, I find that there looks like pixels. Can someone tell me why it is not stay as a vector? Please see the attached picture.

  When you perform the same action for jpg or png with a graphic, everything is perfectly smooth, so why this does not work the same?

  Can anyone help please?

  I checked with a lot of videos and help files, but cannot find an answer.

  Thank you very much

  Confused user...

  I've used other programs that convert text to vectors...

  A small correction of terminology:

  A "vector" is a direction. Don't refer to a path like "vector" or on a plurality of paths in the form of "vectors". Paths (more precisely, cubic Bezier curves) are what you are drawing with Illustrator.

  Type > order vectorize not "convert to vectors." The glyphs in fonts on your system already include traced. That is why they can be set on any size and not become jagged with zoom. But they reside at the level of the system and are "called" by the programs in which you use them. Type > order vectorize retrieves just the traces which are already included in the police and converts them (if any, as with quadratic Bezier curves in TrueType) to native Illustrator of traces of Bézier used cubic. Subsequently, they no longer alive text called for a font file. they are just normal paths in the Illustrator file.

  So, the goal to convert text into paths (as some programs call it) is not not to transform the glyphs for text in traces. they already are. The goal is actually "copy" the traces that are contained in the police and the plop on the page.

  JET

• Why the Math channel records datapoints twice as much as my channels of data when I export it?

  I have data on channels 1 and 2 and also have the selected math (A + B) channel.

  When I export data, it records twice as many data points for the channel of mathematics than others. Why is this?

  Notice that I use a sample, pic not detect.

  If someone could answer this question, I would be very grateful.

  Lesachtalerhof wrote:

  I have data on channels 1 and 2 and also have the selected math (A + B) channel.

  When I export data, it records twice as many data points for the channel of mathematics than others. Why is this?

  What version of the application you are using - 1.0, 1.1 or 1.2?

  In versions 1.0 and 1.1, the math channel makes a linear interpolation between the samples using cursors support and measures. 1.2, we have improved the cursors and were able to remove the linear interpolation.

  What is your version of the application, the time stamp associated with each sample will tell when the sample was taken.

• How can I remove a birthday of the calendar on the wrong date?

  I put the wrong date for a birthday in the calendar.  I put in the correct date but cannot remove the wrong date.

  Is there an error message when you try to delete it?

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Microphone does not work well when recording video to work

  For the last few months, my phone has this kind of problem whenever I wanted to record a video. The audio in the recorded video may not be heard clearly, even with the highest volume. There sounds caring as wind noise even though I'm far from any source of wind such as fan, or when recording. At first I thought it was problems with the listener; probably I had disconnected the wrong way. But after trying a few times, the result is always the same. When I tried to record audio using voice memos, the audio is properly can be heard. This problem only occurs when you record a video. Please help me.

  Hi afiqahroshidi,

  Please visit Apple support communities.

  It seems that your iPhone does not record clear audio as well as your videos. It seems that you have identified that the background microphone (used to record voice memos) works, according to get help with microphones on iPhone, iPad and iPod touch.

  Then, try the following steps, coming from the link above.

  If audio video recordings of soft sounds, or Siri can't hear you, ensure that the microphone near the iSight camera - corner of your iPhone on top, bottom, the receiver is not blocked or covered.

  If the microphone and the receiver are not blocked:

  Get help

  If you still have questions after you test the microphone on your device, try the following steps:

  1. Unplug any accessory plugged into the headphone jack.
  2. Avoid blocking the mic microphone and iSight with your fingers while holding the device or video recording.
  3. Remove the protection of screen, movies or cases that cover the microphone, microphone iSight or iPhone receiver.
  4. Clear all debris from the microphones or receiver iPhone. Refer to the manual of your device on the locations of the microphone.
  5. Restart your device.
  6. Make sure you have the latest version of iOS.

  If you have tried these steps and people still can't hear you on the phone or FaceTime calls or Siri does not hear your requests, contact Apple technical support.

  Best regards.

• Loss of data when you save it to a file?

  Hello

  I have problems with my data recording. I acquire at 2.5 MHz for 5 seconds and when I view it I don't see 1.2 s data, if you use a single channel, or unless, as 0.4 s data, when getting the 8 channels.

  My vi is attached and also a picture of him. To analyze it, I use "TDMS File Viewer" (PDM - File Viewer.vi):

  Attached, it is also a picture of the file viewer. Check the number of samples (225000) and the time when it was taken (19/11/2008 16:14:30.423) and (2008-11-19 16:14:31.362). With a 2.5 MHz, there should be much more samples than what is there...  The last sample (which was not shown in the photo) is time (19/11/2008 16:14:30.513), only 0.1 s after having begun to acquire data.

  Is the problem with the queue? If this is not the case, why are data not saved?

  Thanks for the help,

  Rafael

  Your consumption (bottom)) thread will be scuttled as soon the producer (top) out of wire. Leave the upper loop kills the queue; Dequeue item returns an error, and writing to a file won't do anything if there is an error on the entry. If all the remaining items in the queue when he was killed are lost. The best way to solve this problem is to add another loop of thread; After your existing while the loop closes, loop with a short (10 msec) delay until the queue is empty (by Get Queue Status). Kill the queue only after all your results have been written to disk.

• Is there loss of data when I have other operations at an event?

  Hello. I am a new user to NOR-DAQ.

  Now I develop a sampling program HAVE continuous for the NI USB-6229 case.

  The environment settings are 8 channels under 2 kHz sampling frequency. In the program

  I need to save the data in a csv file each time than in quite awhile, let's 500ms, through the 'event '.

  mechanism. I tested that it takes about 32 ~ 48ms to write the data of 500 ms.

  This 'event' appears as a software interrupt for me so I was wondering if the DAQ hardware

  continues to record new data while I perform the write operation in the case?

  Or put in another way, when I set up the task of sampling with the function

  "DAQmxCfgSampClkTiming", the "sampsPerChanToAcquire" parameter is described in

  be used as a factor to determine the size of buffer. Is this the intended "AI FIFO" buffer buffer

  by the "M series user manual? This means that if I put it to an appropriate value data

  will always go in this buffer first and then read by the computer, so if the transfer is fast

  enough, there is no data loss?

  Thank you in advance.

  Data are recorded by the data acquisition apparatus and stored in the FIFO buffer.  The reading VI DAQmx then takes the amount of data specified on the FIFO and brings the data in your program level.  So as long as your buffer is large enough, you won't lose any data.

  Here are some other suggestions.

  Focus on the architecture of producer/consumer .  It is a way to put writing files in another thread to process and record data at the same time.

  Lean on the function TDMS flow in the DAQmx palette.  It is a way to bypass the program level and get a log file of the data.  The data format will be PDM and not a CSV file.  But there is a plugin to read the TDMS files in Excel.

• century, wrong date on software

  A year ago I had problems with my accounting software not to pick up the wrong century when printing reports quarterly payroll, and I just thought it was a problem in their software. However, I just noticed when I created a spreadsheet in the office it's also things date 19xx, so when I get the 05/07/11 he sees as on 05/07/1911 instead of 2011. I'm puzzled. I checked the date on the computer and it shows correctly, I even restarted and looked into the installer and it also shows the year 2011. Is there another setting somewhere that I'm missing?

  See: http://office.microsoft.com/en-us/excel-help/change-the-date-system-format-or-two-digit-year-interpretation-HP010054141.aspx

• My incoming mail has the wrong date and time on this subject. How can I fix it?

  incoming mail has the wrong date and time when they arrive in my Inbox.

  The timestamp on an e-mail comes from two places, time on the mail server settings and the settings of the time on your PC.  This time setting includes the current time, the time zone and setting time summer time.  If one of them is off, the timestamp will be wrong.  You can check on your PC, but not those on the mail server.

  
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com--KVOA TV, Tucson, AZ.
  Concert at the Hot Licks - www.badnewsbluesband.com

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• Print module Lightroom bands exif data when printing to JPEG

  Lightroom print module strips exif data when printing in format jpeg - how can you prevent this or restore the exif data?

  Use export instead of print to Jpg format to have the exif data in your file.  The print module was never meant to include exif.  For example, how could save exif if you print 3 photos in format a JPG or a Board-contact.