Wrong dialing code when connecting by WM5 with modem F3507g

Hello everyone.
Having trouble using Wireless Manager 5 with my GSM provider.
Supplier: Active-KZ (I live in the Kazakhstan)
They need to dial * 99 # for connection to the internet service GPRS/EDGE.
By default, WM5 creates connection with number * 99 * 1 #.

I can connect to the Internet using WirelessManagerRasConnection in the network connections folder.
Before you press the 'Connect' button, I change short number to * 99 # and it's ok.
But I need to change the number to dial everytime I open the connection dialog box.

WM5 when I press the 'connect' button in its window can't connect, thow, it detects the network and can send and receive SMS.

How can I change default numbering in WM5 number in order to use the manual connection instead of Wireless Manager?

WM5/6 implements an NDIS connection. It does not DUN connections.

If the operator does not support you NDIS connections, use DUN.
I think that there is a HOWTO on http://aps2.toshiba-tro.de/wlan/?page=3ghowto
But it is inaccessible at this time.

Install only the drivers of:
http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads
and then use rasphone.exe allows you to configure your connection. You will be able to change the line number for all that is necessary.

Tags: Toshiba

Similar Questions

  • Provider code when connecting with sqldeveloper 2.1.1.64 17451

    It's my environment

    OS: Windows 7 Enterprise 64-bit
    Oracle client: 11.2.0.1.0 (win64_11gR2_client)
    JDK/JRE: 1.6.0_20 64-bit (jdk-6u20-windows - x 64)
    SQL Developer: 2.1.1.64.45 (sqldeveloper64 - 2.1.1.64.45 - No. - jre)

    When I try to connect to 10.2.0.4.0 or 11.2.0.1.0 database using SQL Developer, I get the following error message:

    To perform the requested operation, an error has occurred:
    type of check not supported
    Code provider 17451

    I can't find anything about this error, and I don't know if mine is a supported configuration. I can connect to databases using sqlplus and jdk/jre is properly installed and configured. Windows XP Professional Service Pack 2 of SQL Developer 1.5.5 worked with jdk/jre 1.6.0_17

    Any help would be appreciated.

    Maybe a problem with the thin Java driver. Try to check the preferences - database - Advanced - use OCI.

    Hope that helps,
    K.

  • HP envy m6: hp envy m6 will not recognize pin code when connecting

    bought a hp envy m6 on February. Some time ago, we have gone from internet connections and we had trouble keeping a stable wifi, then I tried to go into safe mode. and when I tried to connect after restarting, it would not recognize the PIN/password when we bought it first, I created. He continues by saying "bad password":

    I tried f8 keys, from, he disabled/enabled but doesn't, what the hell is going on? Please help, im about to go back tomorrow if the problem persists

    In order to reset your password, you will need to do a factory restore, backup your data if you can.

    Repeatedly press the F11 key at startup to access the Recovery Manager.

    Or use your recovery discs I hope you did when you got the computer

  • ORA-15000 when connect to ASM with ASMSNMP

    With ASM 11 g on Redhat 5 2, I tried to connect to the instance with ASMSNMP in vain
    [grid@cchordrdb admin]$ sqlplus / as sysasm
    
    SQL> conn asmsnmp/asmsnmp@ASM
    ERROR:
    ORA-15000: command disallowed by current instance type
    Is this a problem or normal?

    Normal/expected.
    You have 2 options. By OS authentication (I guess in your case network user and sqlplus login / as sysasm) or the file password (login usu/pwd@inst as sysasm).

    Kind regards
    Cerreia

  • Is it a blue virus - spooldr.sys screen when connected to the cellular modem

    I'm getting "blue screens of death" from time to time when using a cellular modem. Usually using the tool indicates that it was unable to identify the problem of Microsoft error report. However, I get sometimes pointed out that the problem was caused by spooldr.sys. I use Norton 360 and it has never identified the problem, and nor does the safety scanner Microsoft Download. As far as I can tell that this file is not on my computer.

    Other forums indicate that it is a bogus system, sometimes placed by a Trojan, file but I'm very hesitant to download non-Microsoft software that supposedly removes Trojans without knowing the reliablity of the third party software provider.

    Suggestions?

    Go here--> http://www.bleepingcomputer.com/startups/spooldr.sys-19591.html

    Follow the signs "strongly advised".

  • 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

    I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

    I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

    I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

    It took a reinstall (upgrade) to get actually it works again.

  • BUG: Wrong Getting sql code when generating types in jDeveloper 1.1.1.3.0

    I am getting fake SQL code when generating types in JDevelper 11.1.1.3.0.

    Process:

    1. create a new application: Test
    2. create a new project: Project1
    3. create the database offline: ECIS
    4. create a contact schema
    5 create a type:
    CREATE OR REPLACE TYPE HAS_REASON_OF_CETYPE AS OBJECT
    (
    has_reason_of varchar2 (36)
    )

    6 create a table based on the previous type type:
    CREATE OR REPLACE TYPE HAS_REASON_OF_CETYPE_LIST
    AS THE contact.has_reason_of_cetype TABLE;

    7. generate SQL script. Results:

    CREATE THE HAS_REASON_OF_CETYPE_LIST TYPE
    AS_REASON_OF_CETYPE_LIST <-this is the wrong code
    AS THE contact.has_reason_of_cetype TABLE;
    /

    CREATE THE HAS_REASON_OF_CETYPE TYPE
    AS_REASON_OF_CETYPE AS OBJECT <-fact here too
    (
    has_reason_of varchar2 (36)
    )
    /

    I have not seen this error with type names in our project, or this error in the previous version. Someone has seen this before and knows a way around it?

    Published by: user13324293 on July 20, 2010 11:48

    It's a regression in the PS2 (11.1.1.3.0) during our generation of DDL has been rewritten. The problem, in a nutshell, is that while determining if the generated DDL must precede the name of the object with a differnet scheme, there are some erroneous (simpler) made of string manipulation. So if the name (or schema.name) in the source contains the token of what follows (ie the ACE or IS) has the problem. This problem is fixed in 11.1.2.0.0 and 11.1.1.4.0 streams.

    There are two possible solutions.

    You can use instead OF as in the above case (in the STATE does not appear in the name) or simply change the case of ACE so that it is not the same as in the name - that is to say use "beneath", 'As' or 'Sub '.

    I hope this helps.

    Pete - team JDeveloper DB

  • When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

    Hello

    Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

    You can use either; There is no advantage to one or the other specific.

    (144276)

  • When I go to a particular website I chose the wrong thing on the connection now whenever I tried to go to this site it redirects me to my search menu

    When I go to a particular website, I chose the wrong thing on the connection now whenever I tried to go to this site it redirects me to my search menu and can't find the site.

    This is the site that I want to go to- https://delphisso.am.joneslanglasalle.com/idp/startSSO.ping?PartnerSpId=360facilityprod

    And this is the site it redirects to --- https://support.mozilla.org/en-US/questions/new/desktop/other/form?search=When+I+go+to+a+particular+website+I+selected+the+wrong+thing+on+the+login+now+every+time+I+tried+to+go+to+that+site+it+redirects+me+to+my+search+menu+&step=aaq-question

    It seems that maybe you just put bookmark the wrong thing.

    Probably the link you give in your post works if Yes use and bookmark that.
    If necessary, clear cookies and cache and try again from

    See also

  • When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

    When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

    There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

    I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

    Does my keyboard or a virus, my usb port, the update of security or something else...?

    I use this computer without problem for a few years.

    Thank you, Kathy

    osX version 10.9.5 processor 2.3 GHz intel core 17

    First try another KB

    Next

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

    I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

    MacBook Air, OS X El Capitan

    First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

    From the Mail menu bar, you select

    ▹ Connection Doctor window

    In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

    Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

  • Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

    Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

    Greetings Dani56777,

    Thank you for using communities Support from Apple!

    I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

    If you need information on how to update iTunes, please follow the instructions in the following link.

    Download the latest version of iTunes for Windows - Apple Support

    If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

    Remove iTunes Control Panel and its associated components

    Use the control panel to uninstall iTunes and software components in the following order:

    1. iTunes
    2. Apple Software Update
    3. Apple Mobile Device Support
    4. Hello
    5. Apple Application Support 32-bit
    6. Apple Application Support 64-bit

    On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

    Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

    Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

    Have a great day!

  • The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

    I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

    I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

    So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

    A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

    Thank you.

    It will not work. And where did you read that the keyboard works wired with a Mac?

  • Video OK but sound does not go to the TV when connected HDMI on HP Mini 311 with XP.

    Video OK, but the sound does not go to the TV when connected HDMI on HP Mini 311 with XP. Has anyone experienced and resloved this issue and can share with me.  The solutiuon provided in the manual does not seem to apply to the Mini 311 model that we use. Help, please.

    James,

    Visit this link,

    How to get his TV using HDMI cables?

  • When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

    original title: log question.

    When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

    Hi KERRYYX,

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. You have security software installed on the computer?
    4. What is the full error message that you receive?
    5. Are you able to restart and shut down the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    You cannot log off, restart or shut down your Windows XP-based computer

    http://support.Microsoft.com/kb/831431

Maybe you are looking for