Wrong time current GPS receiver while generating signal GPS with GNSS Toolkit

Similar Questions

• Time zone in Webworks works do not properly with OS 7.1.0.342 on BB9810

  Hello developers,

  We are running on a question of bringing together the correct time on a BlackBerry 9810 (OS 7.1.0.342 b1149).

  In Germany, we are now GMT + 2 due to the DST and the Javascript framework is always at the wrong time (GMT + 1).

  On 9810 devices with OS 7.1.0.1033 b2807 of the same code is back at the right time. So this behavior seems to be a bug in WebWorks?

  We have about 400 devices with the old 7.1.0.342 b1149 OS within our environment, so we are not readily able to do an OS update on all of these devices... The webworks app is a large data management that works with a SAP backend. The SAP backend reports errors due to bad time zones, so we can't use the app.

  Can you imagine no work around to get the correct time zone?

  Thank you for your support and your help!

  Thank you

  Daniel

  Hi Chad,

  Thanks for the link. We looked at the posted code there and found a bug in the JavaScript code for the old OS 7.1 to BlackBerry 9810 package.

  We tried the following code with the two beams of BONE:

  var d, i, lastoffset, newoffset;
  i=i;
  lastoffset = 0;
  
  while(i <365) {
   d = new Date(2014, 0, 1, 12, 0);
   d.setDate(i);
   newoffset = d.getTimezoneOffset();
   console.log(d);
   if(lastoffset !== newoffset) {
    alert(d);
   }
  lastoffset = newoffset;
  i++;
  }
  

  This code is looking for the days where the weather changes from DST to standard time.

  The old operating system is back on 01/04/2014 and on 01/11/2014 (it's fake!)

  The latest version of the operating system back to the correct date: 30/03/2014 and 26/10/2014

  Today (02/04/2014) the application works properly, because the Javascript environment is back at the right time yet. But we'll run into problems again in the fall.

  So now, we will update all our devices to the latest OS.

  Thanks for your support!

• How can I reduce the first time lock GPS?

  I am building an app that takes your location and calculate the distance of a few specified benchmarks.

  The problem I have is that it takes on average about 5 minutes to get what he first lock. Even when I change the settings to use explicitly aided in GPS is still takes a long time. I know that there must be a better approach is because Google Maps takes less than a minute to get his lock. Here's the code I used to build criteria:

  Criteria criteria = new Criteria();
  criteria.setVerticalAccuracy(Criteria.NO_REQUIREMENT);
  criteria.setHorizontalAccuracy(Criteria.NO_REQUIREMENT);
  criteria.setSpeedAndCourseRequired(false);
  criteria.setAltitudeRequired(false);
  criteria.setAddressInfoRequired(false);
  criteria.setCostAllowed(true);
  criteria.setPreferredPowerConsumption(Criteria.POWER_USAGE_HIGH);
  

  Here is how I load the location:

  try {
              LocationProvider provider = LocationProvider.getInstance(criteria);
              Location location = provider.getLocation(-1);
              int method = location.getLocationMethod();
              if ((method & Location.MTA_ASSISTED) == Location.MTA_ASSISTED) {
                  System.out.println(" Assisted GPS");
              }
              if ((method & Location.MTA_UNASSISTED) ==
              Location.MTA_UNASSISTED) {
                  System.out.println(" Unassisted GPS");
              }
              if ((method & Location.MTE_CELLID) ==
              Location.MTE_CELLID) {
                  System.out.println(" Cell Site");
              }
              locationUpdated(provider, location);
  
          } catch (Exception e) {
              String msg = e.getMessage()+" ("+e.getClass().getName()+")";
              _mainScreen.reportError(msg);
              System.out.println(msg);
          }
  

  No idea where I am going wrong?

  Are you sure that the fix for Google Maps that you speak is obtained by using the location API at all? Maybe you talk about fix Cellsite-style own from Google that does not use the localization API: simply, he questions a web server with the ID of the current cell and gets an immediate response with a correction. See this post: http://supportforums.blackberry.com/t5/Java-Development/Is-it-Possible/m-p/422751#M83923

• Message list shows wrong time. Different headers.

  Hello

  The message list displays the wrong time. The time indicated on the list is different from the time of the message header.

  According to Thunderbird, a message was received at 23:09, but here's what the header:

  Of the - Thu Mar 27 16:09:16 2014
  X-Mozilla-Status: 0001
  X-Mozilla-Status2: 00000000
  X-Mozilla-keys:
  Delivered-To: [email protected]
  Received: by 10.50.221.166 with SMTP id qf6csp61713igc;

         Thu, 27 Mar 2014 16:09:28 -0700 (PDT)
  

  X - Received: from 10.68.229.68 with SMTP id so4mr4690773pbc.110.1395961767689;

         Thu, 27 Mar 2014 16:09:27 -0700 (PDT)
  

  Return-Path: < [email protected] >
  Received: from fics.freechess.org (fics.freechess.org. [69.36.243.188])

         by mx.google.com with ESMTP id wt1si2456267pbc.161.2014.03.27.16.09.27
         for <[email protected]>;
         Thu, 27 Mar 2014 16:09:27 -0700 (PDT)
  

  Received-SPF: pass (google.com: best record to guess for the domain of [email protected] designates 69.36.243.188 as permitted sender) client-ip = 69.36.243.188;
  Authentication-results: mx.google.com;

        spf=pass (google.com: best guess record for domain of [email protected] designates 69.36.243.188 as permitted sender) [email protected]
  

  Received: from fics.freechess.org (Postfix, from userid 500)
  ID C24CB26096B; Thu, March 27, 2014 16:09:26-0700 (PDT)
  From: < [email protected] > FICS
  To: Aaean < [email protected] >
  Topic: FICS report game Aaean vs PawnCracker
  Message-Id: < [email protected] >
  Date: Thu, 27 March 2014 16:09:26-0700 (PDT)

  I get the wrong time in virtually all of the messages. Any information will be greatly appreciated.

  Thunderbird 24.2.0

  Linux Mint 15

  User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:26.0) Gecko/20100101 Firefox/26.0

  Thank you.

  The time zone is not the computer's time. It's the shift of computers in hours and minutes from the Greenwich Meridian

  The Unbuntu site suggest http://askubuntu.com/questions/323131/setting-timezone-from-terminal

  To change the time zone of the terminal, simply press Ctrl + Alt + T on your keyboard to open the Terminal. When it opened, run the commands below:

  sudo dpkg - reconfigure tzdata

  Once opened, just follow the screens to change the time zone.

• Unable to connect to the generator signal with LabView

  Hello

  I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

  The vi then gives me this error:

  Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
   

  Possible reasons:

  Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

  I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

  -I'm using Labview 8.6.

  -I have NI-VISA installed 4.2

  -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

  -J' use the driver that is for version 7.1

  -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

  What is the cause of this error and how can I solve this problem?

  Thank you.

  -Zach

  Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

  PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

• Computer continues to show the wrong time after resetting it

  Original title: wrong time

  Continuing my computer clock display at the wrong time is after ive reset it, after a while he looks at the clock and won't again.

  I would like to know how to solve this problem please before hand I'd like thank you for your help, so thank you, I'm really glad help you n im very grateful.
  s. wood j

  Check your regional settings in the control panel. Make sure that your time zone is set to which your PC is actually in.

  If your time is changed after turning off the PC, it can be that the battery of your PC that keeps your clock "ticking" is dead and must be replaced. For desktop computers, it will almost certainly be a CR2032 and be something relatively simple to find and replace. for laptops, maybe it's not a CR2032 and may be very difficult to find and replace. Whatever it is, when in doubt, consult a technician, ideally one that you can get a recommendation for. I would have thought 10 dollars (including the battery) had to do for a desktop computer. A computer laptop pourrait be much more expensive, both for the battery and work.

  Tricky

• Establishment of a network connection when you receive a wireless signal

  How to configure network (as a router) connection while receiving a wireless signal

  Hello

  I like the game of decoding.

  If the script isn't as Syed interpatation.

  May be it is,http://windows.microsoft.com/en-US/windows-vista/Using-ICS-Internet-Connection-Sharing

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Each inbound and outbound e-mail shows wrong time

  Each inbound and outbound e-mail shows wrong time, but I do not see where them reset the clock of Thunderbird. The portable operating system setting is fine.

  Thunderbird uses the computer's clock.
  The time is maybe OK but what about the time zone setting?

• Why my iPhone showing the wrong time zone?

  Why my iPhone showing the wrong time zone when it is set to automatic? When I put it manually, it is fine. Is this a bug in the iOS 9?

  Try to activate your iPhone location service before

• Qosmio G30-175: can I receive DVB - T signals with Qosmio player?

  Hi all

  Is this only analog TV on the Qosmio player or can I use the DTV? (DTV fine in windows)

  Digital DVB works fine when started in Win Media Library but became only analog TV using only qosmio

  Thank you very much
  Franky

  Hello

  I'm sure that the Qosmio player receives DVB - T signals, but only analog TV signals.
  That's why you use MCE to watch DVB - T TV

• PXI-6602 generate signals in squaring A, B with DAQmx in CVI

  Hello

  I want to know if it is possible to generate a quadrature encoder signals...

  I want to generate the Signal A, then B Signal with a 90 ° of the delay on the other and be able to set the number of pulses that I want to generate.

  I tried to generate signals with DAQmxCreateCOPulseChanFreq, but I can't start Singal B with the delay of 90 °.

  Have any experience on this?

  Thank you for your help,

  Hello gramirezv Hello,.

  Here is a KB which may help you to generate two trains of pulses with the same frequency but with a phase shift:

  How can I generate two pulse Trains phases shifted from each other on my E series card?

  http://digital.NI.com/public.nsf/allkb/26CCE4F74DACFD1886256DCF006B011A?OpenDocument

  Have a lovely evening,

  Best regards

  CaEnOs

• Costume measurement OR for Mobile/Fixed WiMAX 1.0, is there any optiion to activate PUSC or AMC for the generated signal?

  Hello.

  I use a VST OR to generate the WiMAX signal. I installed NO measure costume for Mobile/Fixed WiMAX 1.0 on the calculation. But I can't find any option on the front panel of the combination of the generation to enable AMC or PUSC for generated signal. This feature exist at all?

  Thank you.

  Hello sam2013ni,

  That's all I see for AMC and PUSC. Look in "box Type".

  

  

  Best regards

• HP Officejet 4630e all in one: the time on my printer display shows the wrong time

  The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

  Hello

  The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

  Try this

  Power reset

  1. Without putting off the product, disconnect the power cord from the back of the product.
  2. Wait 30 seconds and then plug the power cord into the back of the product.
  3. If the product is not already on, press the power button to turn it on.

  Now, try to change the date and time and check.

  Where this fails, try this

  Setup > tools > restore defaults

  Try to set the date and time of return

  NOTE: This will remove network also settings so you need to redo the configuration of the network

  Measures to restore the network configuration

  http://support.HP.com/us-en/document/c03834108

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn

• Generate signals using a file

  Hello

  I want to generate signals with my USB-6211 from a prepared file in advance, so I have a file full of sampling points and you want to generate a signal with this file. The file can achieve big enough. So I need to find a way to partially fill the generator with samples...?

  Anyone?

  Best regards

  Thijs

  Hello Thijs,

  What file do you use? Excel? TDMS? txt? or others?

  I guess you wrote your samples in a normal txt file.

  To do this, you can read in your worksheet (if its only data without columns, which are not serious) you can use the worksheet File.vi reading

  This VI reads all the data that you specify (how many lines, shift etc.) after that, you can simply set your table with the normal array functions and give these data

  to your task AO.

  Let me know if this was helpful, or if you would like more information.

  Kind regards

  Markus