Wrong time file Express with NI9361 medium Freq dynamics of the signal

I have an interesting problem with recoding of the frequency to a file with SignalExpress measures and a NI9361. I was able to find a workaround, but here's the question:

As in the attached SignalExpress project, I'm analog acquisition of voltage using a NI9234. In this case, the module is in place only for the/cDAQsim/I/SampleClock channel exist for my next step to reference. I'm also acquisition of previous frequency with the NI9361 in dynamic mode with an average using the reference to external clock of the analog input stage. Then I have a backup at the ASCII stage where I want to write a file leave ASCII, comma with absolute time.

That's the problem. In this case, I cared only to save the frequency to the file. But, when I did the absolute time would count per second for 100 points, then loop back at once and County place again. (See attached Test01.csv.) This is the same behavior that if I tried to record data using just the NI9361 without an external sample clock.

If instead, the save operation I take FIRST entry then the frequency I will get a file with the correct absolute time as Test02.csv analog, attached. Even if I save the frequency as the first entry and then return to tension the problem at the time scale.

Anyone know why that would happen? Is there a simpler way for the frequency measures stamped recored with the NI9361 and SignalExpress without analog data recording? without using an analog input module at all?

Hello

This question looks better suited for the Signal Express community forum page.  Please ask your question here.

Thank you

Tags: NI Hardware

Similar Questions

  • Why the prores files original with stereo tracks into first on the single audio track?

    Why the Prores files original with stereo tracks into first on the single audio track?

    Here are a few ways.

    Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

  • associate a file extension with my executable, how to receive the file name?

    Hello
    I use flaslh profresional to create this application: Edit_epl.exe

    I have install the application.

    I'm doing a file association extension because I want to do: when double-clicking a file with the extension '.elp', and then runs Edit_epl.exe.

    example doubleclick on: 'my_sample.epl'-> then tracks Edit_eplp.exe.   So far so good.

    My question is how do you know its file name (my_sample.epl) as a 'parameter' inside the 'Edit_eplp.exe '.

    Can someone help me?

    Thank you

    I solve it!

    Question:

    I want to click on a text for example file hello.txt, with the content: "my name is Fernando.

    1 - create a My_edit_txt.exe application (with a single text_field, MY TEXT)

    2. install the application.

    3 associate the extension txt with my editor: My_edit_txt.exe

    4 - when I click on hello.txt,

    5 - the system starts-> My_edit_txt.exe (works good so far)

    6. so I don't know: inside My_edit_txt.exe:

    What the user clicked file?

    Resolution:

    NativeApplication.nativeApplication.addEventListener (InvokeEvent.INVOKE, onInvoke);

    package silbo.esment.general.base_juegos

    {

    import flash.desktop.NativeApplication;

    import flash.display.MovieClip;

    import flash.events.InvokeEvent;

    import flash.text.TextField;

    SerializableAttribute public class Clip_editor_epl extends MovieClip

    {

    public var t_texto:TextField;

    public void Clip_editor_epl()

    {

    Super();

    NativeApplication.nativeApplication.addEventListener (InvokeEvent.INVOKE, onInvoke);

    }

    function onInvoke(event:InvokeEvent):void {}

    mitrace ("on call");

    mitrace ("ARG =" + Event.arguments);

    mitrace ("file to open:" + event.arguments [0]);

    }

    function mitrace (piece) {}

    {if(Trozo==null)}

    Piece ="";

    }

    t_texto. AppendText (piece + "\n");

    }

    } //clase

    }

  • How can I set Up Airport Express with an existing router/modem from the ISP

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer. I suggest you to connect the printer to the Airport Express A1392 Epson) via a USB port to enable the AirPrint features.  However, I guess the Airport Express must be an ethernet to the modem/router ISP connection and then use the Epxress airport more convenient than my wireless router.

    Issues related to the:

    1. do I need to turn off the function the ISP router's wireless when I plugged as stated above? So I wait.

    2. as the Airport Express only has one ethernet port I assume that I can connect my other ethernet connections using a hub 4 ports connected to the Airport Express Terminal.  It will be always possible to use other ports ethernet on the modem/router ISP as well?

    Doug

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer.

    You may have received incorrect information, because a non-AirPrint on the USB port on an AirPort Express Terminal... or any other router from Apple also printer... do not make the AirPrint-compatible printer.

    You want to continue nevertheless to check that this is true?

    The AirPort Express can connect to the network wireless router using a wireless connection... or... it can connect to one of the router's Ethernet ports using a wired Ethernet connection.

    Wired connections are always preferable wireless if possible for your Express.  Turn off the wireless router is not necessary if you want to connect to the Express using an Ethernet connection.

  • Compare the current time and date with last modified?

    Compare the current time and date with last modified?

    What is the ideal way due to report at the last modified file with the date and time class? last modifed class in the file value is of type long.

    798642 wrote:
    No no no no, currentTimeMillis() only gets you the time... I need to compare the Date and time.

    You should read the docs more closely. It gives you the current time in time, which includes the date.

  • Each inbound and outbound e-mail shows wrong time

    Each inbound and outbound e-mail shows wrong time, but I do not see where them reset the clock of Thunderbird. The portable operating system setting is fine.

    Thunderbird uses the computer's clock.
    The time is maybe OK but what about the time zone setting?

  • Why can't deselect files associated with wmp12 in the Panel types?

    Under set program Associations in the Panel applet control default programs - I can't deselect any of the checkboxes for the types of files associated with WMP.  I can choose the few steps that are already associated.  How to do this?  Words cannot describe how horribly WMP 12 is suck compared to previous iterations, unfortunately I have not yet found simple, easy to use media player better.

    Probably cos you have no alternative installed.

    There are many good (and bad incredibly) other players on the internet. Google and you'll know!

    If you have already installed an alternative solution: make a right-click on a music file you want to play and in the context menu, choose open with. You get a list, select your new player, more brilliant, make sure that the always open with box is enabled and then whenever you click on a type of said folder your new player goes, well, play. You will need to do that for all the files of types which, in the past, you used WMP for.

    If you're still looking then VLC is an excellent multimedia (free) replacement for WMP can play 99% of the media files that you throw, out of the box. During installation, you can associate whatever files you want to open when you double-click it.

    See you soon,.

    Jerry

  • How to get CC 2015 to open existing photos under FILE > open with

    How to get Photoshop CC 2015 to open an existing picture.  When I go to FILE > open with CC do not appear in the programs

    Sound like you may be using Windows. Please check your windows Photoshop.exe registry key which version of Photoshop is open and edit with?  I remember that mine have been updated to 2015 CC but I changed the back ventilated at the 2014 to CC are many bugs in 2015 of CC. I also changed my Windows file associations to open with CC 2014.  I left Adobe Bridge file types associations 2015 CC.  There are simply too many places in Windows systems which appear to be involved with open with and file Associations.

    .

  • allow to return raw files edited with camera raw how?

    Hello

    I have a problem

    I use bridge cs5 (update) to browse my raw files

    often I open my raw files with camera raw in bridge cs5 and some corrections as exposure, saturation, contrast and so on

    but after that the bridge is not re - make files

    I mean the thumbs, previews, the show remained in default setting

    When I click and open with camera raw Bridge or photoshop cs5, the raw files look with changes

    but once again the bridge not show me with corrections

    I've run under 32-bit w7

    What could be the problem?

    Thank you

    You probably use built-in thumbnails.  These provide faster loading and less space, but they show no changes.

    If you want changes to show you must use one of the options inch HG.  These options are under Essentials icons in the toolbar.

  • Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

    I want to add a new application to the list right click on file-> open with

    and also reorder the list so my search app is first / top of the list.

    I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

    Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

    Thank you very much for all the advice offered.

    The operating system, not you, not control that open with the menu command.

  • Outlook Express file delivery with mailto address:

    Sites with mailto: links do not pass through the address of the recipient to Outlook Express with Firefox 5. This problem has persisted for at least 4 months now, and a fix was promised months ago. I am running 5.0.1 on a PC with Windows XP. Outlook Express runs, but does not open the new message window and of course nothing is filled in.

    MSIMN.exe is Outlook Express.

    As far as I know Outlook Express has been replaced by Windows Live Mail even if use you it just like Outlook Express on your computer, not on a web page. But I had been on Windows 2000 and am now on Windows 7. You are on XP.

    When I looked at mailto: mine shows "Windows Live Mail (default)" and shows 'WinMail.exe' details chosen and Yahoo Mail and GMail. And the commentary to the dialog box for the selected-"this application is located in: C:\Program Files\Windows Mail\WinMail.exe".

    Most things seem to be found by dumb luck, even more luck is when what you find, it's something that you really want. Someone else will probably have the same problem a day - please mark the issue as resolved so that all those who are seeking answers to the same problem knows that there is a solution available. I doubt that I would have looked beyond the default selection. Do you want to show Outlook Express in the title bar, or you do not show Windows Live Mail (or something slightly different, that I do not remember what was between the two).

  • Wrong time current GPS receiver while generating signal GPS with GNSS Toolkit

    Hi all!

    I have a problem with the generation of GPS signal. As he has shown in the current schedule to the receiver time differs from time current GPS week on niGPS Live Streaming Generation.vi

    Time initial GPS set to 0, so I expect the current, while production should start at 0:00 December 6, 2015. But the receiver poster 23:59:40 12.06.2015 start

    Could someone explain to me what can be wrong?

    That's what I was talking about yesterday.

    Time of receiver watch hour UTC

    Is time on GPS Live Streaming VI GPS.

    GPS Time - time UTC = 16 seconds (Leap).

  • I have Outlook Express 6. When I want to fix anything, the attachment box appears in a size... with only 6-8 files/folders showing both. How to adjust the size of the box?

    I have Outlook Express 6. When I want to fix anything, the attachment box appears in a small... with only 6-8 files/folders showing both.  How to adjust the size of the box?  There is no minimize mazimize click or angle to slide.  It used to be adjustable, but no more.  Help?

    Like when you open a new message window and either click the button attach or insert | Attachment? I don't ever remember being resizable or a very large box. Change the display of list will give you a bit more, but that's all.

  • Why the video file I opened several times, is associated with any player and stays as a file unknown?

    Hi, I got some video files, which do not associate with any player and stay as files being unknown, so every time when I double click on them, 'open with' opens the dialog box

    OS: Vista Ultimate 32-bit sp1,

    in the properties file type: file, when I use mediainfo tool indicates that the format of the file is mpeg-4.

    So my questions are, 1. How can I create a new association for a new format in Vista (in "associate a type of file or Protocol with a program" is not an option to create the new association), 2. why the format itself do not associate any player?

    PS: It is not a problem at all, yet I can watch the video after choosing any drive dialog box "open with."

    But I would be very grateful if I understand the reason and the solution with your help.

    diantus

    Box "Always use the selected program to open this kind of file" is not active during the opening of this file
    diantus

    ===========================
    Perhaps the following links will be useful.

    Where is past file associations in Windows Vista?
    http://ask-Leo.com/where_did_file_associations_go_in_windows_vista.html

    The creation of Vista file Association
    http://www.ehow.com/how_5796501_create-file-association-Vista.html

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How to export a PDF file to a word document? at this time he came with "specified by a policy (CMap) encoding is missing? What can I do?  Thank you

    How to export a PDF file to a word document? at this time he came with "specified by a policy (CMap) encoding is missing? What can I do?  Thank you

    Hi frenchiem,

    This is due to the PDF file cannot display the original fonts. To fix it, creator must create the PDF file with the police embed option enabled. Thus, the user can open the file on any platform with the same layout. Or the product Acrobat can display them after installing the media kit for police on the client side.

    Kind regards

    Rave

Maybe you are looking for