Wrong version of vista, installed no way to change this?
Howdy,
My sister has trouble with his laptop (running Vista Basic) HP, so my father tried to fix with its own copy of his CV, not realizing that it was installing Vista Home Premium. He used his cd key, so it cannot validate.
She doesn't have the CD that came with his laptop, so is it possible to downgrade Vista Premium home base so his series work?
Thank you.
The correct version with the good drive will need to be reinstalled.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I have adobe creative suite 5.5 Design premium for pc and I'm wondering if is there way to change this mac version?
There is no possibility for an Exchange platform for older versions of Creative Suite. CS6 is eligible.
-
My ISP changed the name of the mail server. There is no way to change this in Mail (El Capitan).
I see not where do under preferences: accounts > incoming mail server, but it is grayed out. How can I change this? I don't mind editing a file. The obvious answer "Delete the account and add a new charge" seems all brain-numbingly stupid, especially because we USED to be able to edit this field! Not sure when it changed.
You're in the wrong place. Go to System Preferences > accounts Internet and select the appropriate account. Click on the DETAILS button and you should find the server info.
-
I want to change my region that I change my country I live but ask me to spend the money I had. So, there is a way to change this without asking me to buy sth?
Contact iTunes Support - http://apple.com/emea/support/itunes/contact.html - and ask them to clear your balance.
-
I changed my password to get into my phone and I don't remember, I can get by using the contact ID, but I don't remember the password. Is there a way to change this without typing the former in?
N ° you'll need to restore your iPhone:
-
I installed the wrong version of Vista. How do we install the right pair?
Installed the wrong windows vista (Vista Home Basic). He should be editing windows Home premium, what can I do to fix it without having to reinstall everything? My Home Premium is for new installations.
You must reinstall the correct Version of Vista.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Since it is not in the Applications tab, I can't change how Firefox handles it. And since it automatically opens it in a text file, I have no way to download this file type when it is bound to the JavaScript or flash because I can't right click and "save link as.»
How can I make Firefox ask me how to handle the file instead of as text?
I tried to remove "mimeTypes.rdf" of my Firefox profile.Therefore, there is no way to do what I want... to configure Firefox to ask what to do with the text/plain files instead of making them. I fell a feature request for it in the suggestion box.
-
I use a Wi - FI 764DD8 EVO he asks the security code is WPA2 (AES). Palm has a WPA - PSK code with no way to change what I can find. Thank you Bob
Limitation of the device. He is able to use WPA2?
(Why is it a problem of Windows XP? heh) -
wsastartupo failed or if you have the wrong version of the installed winsock
Can solve this problem without a recovery disk?
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
I suggest you to check in safemode, if the problem occurs. Follow the steps mentioned below.
a. restart the computer and keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
Check if the problem persists.
I suggest to reset winsock on the system and check if the problem is resolved. Follow the steps mentioned below.
a. click on Start menu and type cmd in the search box start and press to enter.
b. type the following command.
netsh winsock reset
c. check if the problem is resolved.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Updated my Apple iCloud ID still shows the old email with no way to change this, but
I recently changed email providers and updated my Apple ID to reflect this. However, iCloud keeps wanting me to verify the information but is always invites me with my old email address to do not accept my valid password with the wrong e-mail address. How can I get iCloud to know my new email when my identifier Apple is already thinking this?
Go to the system/iCloud preferences panel and disconnect. Restart, go back and reconnect. See if that will jump start iCloud with your new email address.
-
I installed Adobe Reader DC on my PC and adobe has become the file type by default to open.exe such as chrome files, ms word and internet explore.
I uninstalled the application and everything is back to normal with my .exe files and then I reinstalled adobe and it's back to the default type of the .exe file.
Can someone tell me please how to fix this?
Maybe https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html
-
What is the best way to change this program and to read 1 sample of each channel?
The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?
A BNC-2090 is just a connection block. It has no effect on the question of whether you should use traditional DAQ or DAQmx. Which is determined by the DAQ card that you are connected to the terminal block too.
You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.
What problems are you having with the new VI you just posted? You get an erro rmessage? I don't know what mean "rare readings.
You really shoud look at some cases DAQmx in the finder of the example. Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected. Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task. Many of your data acquisition functions are sitting there on the small islands now. You should also connect to your son for the error.
With DAQmx, you should be combining all your analogue channels in a single task. It should resemble Dev0/AI0... AI7. Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.
Other things you need to do is to replace the structures sequence stacked with flat sequence structures. Turn on automatic growth for some of your structures such as loops. At the end of the day, you might find, you can eliminate some of the structures of the sequence.
-
A given wrong email to Ubisoft. How can I change this?
I recently made a mistake with my email address during activation of UBisoft through my PS3 and it will see only this e-mail address, can someone tell me how to remove this email address I lose much because of this error info
Thank you
Ray
Moved from the community involvement Center
Original title: mail
Hello
Not a problem. that we can help.
Contact Ubisoft
https://www.Ubisoft.com/en-us/game/assassins-creed-syndicate/
Support of Ubisoft
https://support.Ubi.com/en-us/
On this page,.
How can I change my account look promising Uplay
https://support.Ubi.com/en-us/
Don
-
When I signed up for CC (Photoshop and Lightroom) I only had the option of monthly payments ($9.99). I'd rather do this as an annual payment. What is an option? How can I do this?
Hey Kevin,
You can absolutely change your option from monthly to prepaid.
Please contact adobe for the same support:
Hope this helps!
-
Is there a way to change the default sort of the Explorer of Windows 8 fields?
I would like a way to change the default sort fields to explore. For example, a default pictures folder displays the fields 'name; Date; Type; Size; Tags '. Is there a way to change this so that a default pictures folder indicates 'Date Modified' instead of 'Date' when sorting.
In addition, the default order can be changed also? Sticking with the example files pictures, is there a way so that instead of sorting by name, the default is sort by modified Date in ascending order?
Try the following (similar to earlier versions of windows):Right-click on the folderPropertiesCustomize-Choose among five models (General information, documents, photos, music, video - what's in a name?)-choose to apply to subfoldersARange such view as described by KevinIn the menu bar:View
OptionsChange the folder and search optionsViewApply to records (of the same model)Hope this helpsJVH
Maybe you are looking for
-
Hello I want to add a free fall detection to my prototype using myDAQ and LabVIEW. I need to come out with a program. How to make using the screws and what type of fall detection sensor/hardware do I need? I am a student and a low-cost project. As I
-
How can I move the Photos in Windows Photo Gallery in Windows Live Photo Gallery?
Move Photos I had Windows Photo Gallery, first (have always on my computer) and then installed Windows Live Photo Gallery. How can I move the Photos in Windows Photo Gallery in Windows Live Photo Gallery?
-
Need to remove and rename files, but this is impossible. I only link to new records. The link manage records is gone. I use Hotmail, Windows 7. Can anyone help
-
Groups of mobility between...
Hi experts, I am managing WLC 3: 1 WLC 2112 - code version 7.0.235.0 2 WLC 2112 - code version 7.0.235.0 3 - WLC 5508 - version code 7.6.130.0 (new purchase) Is possible to group the WLCs 3 in a group of mobility
-
Recently, several attempted network using DoS.Generic.SYNFlood attacks. All attacks are trying to come across 40 Port. How can I block this port? I checked the registry of Port number and 40 is unassigned... exactly why they use it. Can anyone he