Wrote a number to PDM

Similar Questions

• Im trying to fill out an application online which is a PDF file, but whenever there are similar areas (e.g., phone number, name, etc.) it automatically matches that I put earlier in the application. I wrote my number of phone, but then emergency contac

  h

  I see this a case of duplicate field names. For example, in a pdf form, you have 2 text fields. If the names of these two fields are same then it will duplicate the data as well. In this case, please go to the editing Mode form using Acrobat DC on your PC/Mac and give different names to the fields.

• Issue of serial number for Vista!

  I got a new the A100-049 with vista installed but I wasn't happy with it and I uninstalled vista to XP today, but I did know that since I have two hard drives I can have vista installed as well.

  I'll install vista and asks me the serial number. I wrote serial number appearing under computer while I still have vista, but when I typed in realized that he was not long enough, so I look in the case and the book, but I'm not.

  Then I see, however, that the matter is for windows anytime upgrade and not the edition windows Home premium, and I as well as the manual for home prem.

  So can my question, I get vista back only to have the upgrade dvd? or am I just stupid and the serial number is located where the book somewhere? I feel like I should know!

  Hello

  You're certainly not stupid. Product number belongs to the operating system stored on recovery media and cannot be used with the CD of complete installations.

  F you want to have two operating systems for the installation of Vista, you must use supplied recovery DVDs and you should not enter any key.

  Good bye

• in acrobat pro DC, I can't re - save files after making changes and the number appear in what looks like Arabic?

  in acrobat pro DC, I can't re - save files after making changes and the number appear in what looks like Arabic?, I run repair and rebooted the computer several times now...

  Ann Chinsang wrote:

  I can not re - save files

  Why? What is the procedure that you follow? What is the error message?

  Ann Chinsang wrote:

  number appear in what looks like the Arabic

  -What are you talking about? When you try to change the numbers in my document; it evolves in Arabic numerals

• Premium HP: HP Premium: PROGRAM FOR DOING MATRIX OF BATTERY of the CALCULATOR (don't DO NOT WORK!)

  Hello!

  I attend the University for electrical engineering, and so I plan to buy a good calculator for my needs:

  -programmable with enough memory

  -graphical representation

  -"Advanced" math

  I have not discovered only recently on the amazing HP calculators (e.g. HP 50 g), which are capable of the RPN notation and thus make the calculations very fast and effective. I really hate the new calculators that announce the entry "quick and easy" using graphic symbols and cursor to select the location of the entrance! It of a lot of your time and makes me crazy, especially when it comes to long and "complex" calculations

  As I am not able to get the new HP 50 g, I looked at his "successor": first HP. But unfortunately there many defects in the RPN notation and also in some functions. But I'm willing to compromise, especially if I can write programs to replace some missing critical functions of HP 50 G.

  BUT, when I started looking into writing my own duties I quickly discovered that the lack of management functions of the inputs/outputs and even some strange/inexplicable behaviors.

  I wrote a program:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  IF length (a) == 1
  
    THEN
  
  b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
  i: = a (1);
  
  j: = a (2);
  
  b: = MAKEMAT (years (i + j + 2 - J-(I-1) * j), i, j);
  
  END;
  
  (b) return;

  This program takes the last argument ("a") of stack for the size of the list/matrix.

  If the argument 'a' is a number (list 1 item), it creates a list of the last 'a' arguments from the stack. -> WORK

  Otherwise, it creates a matrix with columns and the specified lines. -> DOES NOT

  Now when I tested the code without I or J arguments MAKEMAT service, she worked OK. He worked too, if I used a very simple expression: for example I have J-1 or i + j - J + 2 (column only scanning).

  (The upper part (1 expression in the stack is the return value after execution of Array ()))

  OK LIST:

  

  MATRIX not OK:

  

  MATRICES OK, so current of enforcement only of years (i + j - J + 2):

  

  MATRIX OK, so current execution really simple Ans(I+J-1) function:

  

  Why these anomalies! I was really looking forward to buy HP Prime, but after all these issues and no real control on the stack of the calculator for the impressive programs

  HP 50 g has built in functions for these conversions, but more recent first HP does not work.

  All the best,

  Ziga

  And summarize the features of the program:

  Make a list of last wrote the number (one being 1: command):

  

  Make a matrix using a schema = {i, j} (a being list in 1: command):

  

  The array() function:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  (A) IF size == 1
  
    THEN
  
      b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
      i: = a (1);
  
      j: = a (2);
  
      b: = MAKEMAT (years (i * j - J + 2-(I-1) * j), i, j);
  
  END;
  
  (b) return;
  END;

• Uh oh... my browser just spoke to me.  Spyware?

  I just clicked on a result of research and all of a sudden my Chrome browser started saying (literally) "your computer is infected with spyware.  Dial the number on the screen to learn how... "I quickly wrote the number and all stop."  Now, I use my laptop and I would like to see if anyone else has experienced this before that I called the number of thought.  Help!  Terri

  dogbuns wrote:

  I just clicked on a result of research and all of a sudden my Chrome browser started saying (literally) "your computer is infected with spyware.  Dial the number on the screen to learn how... "I quickly wrote the number and all stop."  Now, I use my laptop and I would like to see if anyone else has experienced this before that I called the number of thought.  Help!  Terri

  It's a scam pop-up ads, also known as the name of a browser hijacker.  Don't call all the numbers you have seen in the pop-up window.  To get rid of this, Force Quit Chrome (-> force quit-> Chrome), then restart in Mode safe mode by pressing the SHIFT key.  This will prevent the already open tabs or windows to reopen.

• tick count vs get time in seconds

  Hello

  I have a question about dt different then as 'number of cycles' and "get time in seconds" on a loop.

  I am attaching the picture which should describe the problem.

  Why is there a difference and what would be the best to do?

  Yves

  jyang72211 wrote:

  Number of cycles vs. get date/time in second do roughly the same thing, but if you use functions to calculate the time difference, you should be aware that tick count will finally make a loop around.

  Regarding your block digram, you have a table that are used to calculate the elapsed time for each iteration of the loop, and it will always be 150ms, because that is the job of the time – the loop to ensure that it completestobegin each loop to the exact amount of time specified, which is 150ms in your case.  However, regardless of the inside, the loop can be executed at any time during the 150ms you have allocated to the loop, i.e., you 150ms to run everything that's in the loop, but when run the code in the loop exactly is indeterminate.

  However, it seems that clock Tick would give you a pretty consistent result, 150ms.  It is possible that the execution time for the clock to tick is more consistent than the other function.

  Anecdote:

  Differnce between the counties of the tick will always be correct even when it rolls.

  Time loop determines when it starts, the code that runs in it determines when it ends.  If it was the other way around I would be snapping this code that takes 5 minutes to run in a defined time loop to traverse once per second.

  I agree with Yair you see the resolution in the timestamps of OS.

  Ben

• Intermittent error 1077 on update of the Boolean property node

  I have an intermittent error disabled 1077 on changing the value of a series of nodes of Boolean property in my program. I'm passing an array of references in a loop For, all the controls are in this VI and it can be classified for these purposes as a first level VI.

  Most of the time that my code works fine, however, debugging my code this morning after any recent change in this part of the code I get errors that I have problems. Any ideas on how to get this past or what is causing it please?

  Photo of part of the attached fault code.

  (Loop on the right is normally recorded shirft, but is not currently facilitate debugging).

  Finally found the problem.

  Because my table of numeric values was so small in width, I saw only a figure because I expect only the width to a figure.

  In one of the structures of the event, I wrote the number 030 instead of 0 for the node property disable result with the above error.

  I learned from this mistake and my paintings a little wider. (This is a similar problem when you forget to look for the possible extra line in a control of the chain).

• Convert Word Documents to come in white

  I wrote a number of documents (in Spanish) on my husbands computer.  It is under Windows XP Professional and Word 2010.  I moved on USB into my laptop, Windows 7 and vista operating system.  When I try to access one of these documents, it opens as 38 blank pages.  The original document has first been converted?  Documents can be saved?

  Word:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Word Help Forums at the link above.

  They will help you with your question Word when repost you in the Office Forums above.

  See you soon

  Mick Murphy - Microsoft partner

• BlackBerry smartphones can not access voicemail

  Could someone tell me please how to get to my voicemail?

  everettbigguy wrote:
  The number it sends to is my cell number and all I get is a busy signal

  Hello everttbigguy

  First, you have to call your wireless provider to activate voicemail as services already suggested, otherwise it won't work.

• How can I get the toolbar to check my spelling on Notepad

  I wrote a number of pages on my notebook and I need a spell check.

  Hello

  Thank you for contacting Microsoft Community.
  Notepad doesn't have a built-in spellchecker. You can use Microsoft Word to spell check. This is because Notepad is just a viewer and Microsoft Word is a professional text editor. Microsoft Word has page breaks, alignment, styles, etc. required for processing. These are absent in Notepad.
  You can, however, use WordPad as an alternative to Notepad, but the spell checker is still missing. It is also a word processor, advanced than Notepad but simpler than Microsoft Word.

• NULL point Exception: when we try to insert data with the procedure after obtaining values of the iterator.

  public String submit() {}

  BindingContext bindingContext = BindingContext.getCurrent ();

  DC DCDataControl = bindingContext.findDataControl("AppModuleDataControl");

  AppM AppModuleImpl = (AppModuleImpl) dc.getDataProvider ();

  BindingContainer links = getBindings();

  OperationBinding operationBinding = bindings.getOperationBinding("getCAL");

  Object result = operationBinding.execute ();

  String dte = result.toString ();

  Model CollectionModel = (CollectionModel) classHeldTbl.getValue ();

  ROWCOUNT int = model.getRowCount ();

  for (int i = 0; i < rowcount; i ++) {}

  JUCtrlHierNodeBinding = (JUCtrlHierNodeBinding) model.getRowData (i) rowData;

  If (rowData.getAttribute (8)! = null) {}

  int slotId = Integer.parseInt (rowData.getAttribute (5) m:System.NET.SocketAddress.ToString ());

  int sectionId = Integer.parseInt (rowData.getAttribute (6) m:System.NET.SocketAddress.ToString ());

  int teacherId = Integer.parseInt (rowData.getAttribute (7) m:System.NET.SocketAddress.ToString ());

  String rowData.getAttribute = chk (8) m:System.NET.SocketAddress.ToString ();

  If (chk.equals ("true")) {}

  try {}

  System.out.println ("dateee:" + result + "id Teachr" + teacherId + ETD + "" + slotId + "" + sectionId);

  appM.submitClassHeld (teacherId, dte, IDEmplacement, sectionId);

  System.out.println ("After proc");

  } catch (NullPointerException e) {}

  System.out.println ("-Execption" + e.getMessage ());

  }

  }

  }

  }

  Returns a null value.

  }

  There are no issues with values... This function works only once. When we submit the values on the selection box it works once, but when press us the button submit again select different box it inserts the value in the database, but on the page shows null pointer exception.

  RowData are so is equal to null.

  Change this line in the following way:

  System.out.println ("rowData =" + rowData);

  If (rowData! = null & rowData.getAttribute (8)! = null)

  and lat me know what happens

  JohnMackanzi wrote:

  Number of line 58

  If (rowData.getAttribute (8)! = null) {}

• Problems (1) beginner

  I installed 12 EP on my new laptop computer. Yes, it works but less that I would. So I wrote a number of problems, and the most important at the moment are the following.

  1.

  I tried to optimize Windows 8.1 for video editing. But there is one thing I would like to know.

  I have the processor and motherboard from Intel. So when the workload is limited, the laptop uses Intel graphics.

  I also have a 1 Gigabyte Nvidia graphics card. As the work load increases, this is used for graphics.

  How can I check that the laptop goes to the graphics card when the workload is important?

  2.

  I must correct the audio volume. So I have the visible meters when I edit. But every time that I reopen the project, the meters have disappeared, so I put back them.

  How to make sure that that the meters are still there when I reopen it a project?

  I don't know anyway to ensure that the program will use the nVidia Driver. On the other hand, it probably doesn't matter. Assuming that you have adequate food on the processor, graphics card is not likely to significantly influence the Premiere Elements.

  What processor you have and how much RAM?

  Regarding your audiometers, there is no way to keep them open at all times. Must re - open them each time you open a project.

• LR 4.1 RC: Remove CA reduces in some areas and increases in others?

  I have 2 screenshots of LR 4.1 RC using the option to remove the Chromatic Aberration. The first is before and the second is after. Note that in the front where I wrote the number 1 there is color in the Red fringe and where I wrote the number 2, it does not exist. Then when I choose to remove the Chromatic Aberration the region number 1 is better but the region number 2 is worse.  Perhaps nothing can be done, or maybe that I've done something wrong or maybe I don't understand something, or maybe something else?

  Before:

  

  After:

  

  There are two types of Chromatic Aberrations (CA), lateral (axial) and longitudinal (transversal):

  http://en.Wikipedia.org/wiki/Chromatic_aberration

  CA LR tools are designed to correct only longitudinal aberrations, which is the type that becomes more pronounced as you get more far away from the center of the image. Axial aberrations color (purple fringing) is generally uniform size throughout the image, but more visible along the borders in areas of high bright lights dark. Yes, you can correct axial in a specific area of an image with tools CA LR3, but then it will introduce longitudinal CA in the rest of the image. In the area of the photo you have posted, I suspect CA axial and longitudial are present. LR4 automatically corrected lateral CA, revealing the presence of axial CA.

  LR3 both LR4 have a "Fringe" tool located under 'Manual' in the Panel of the Corrections of the objective, which is designed to remove axial CA. Take this same picture and try to check the 'fringe' > option "all sides." Try to use both with and without the ' remove Chromatic Aberrations "checked. The LR ' fringe tool does a good enough job by removing most if not all the "purple fringing," including sensor overload fringes commune with smaller sensors (i.e. crop sensor, point & cameras).» It does not reduce the sharpness or add any visual artifacts, at least for images that I've dealt with it. Interestingly, software Nikon View NX actually provides separate tools for axial and lateral CA:

  https://nikoneurope-en.custhelp.com/app/answers/detail/A_ID/45733/~/what-is-the-difference-between-lateral-and-axial-chromatic-aberration%3F

  I suspect the NX Axial CA tool performs similar to the "Fringe" LR tool, but with a cursor instead of two parameters (edges highlight, all edges).

  Post edited by: trshaner: corrected link Nikon View NX.

• Flop native SOAP service: "Closed connection..", ready for production?

  Our system: Oracle 11 g 2 on CentOS Linux X 64.
  I followed the instructions here: http://www.oracle-base.com/articles/11g/NativeOracleXmlDbWebServices_11gR1.php, well, I can view the WSDL on browser. Now for the real world test, I wrote an application in Visual studio.net 2010 to use the service, after the first time (the value returned successfullly), I had such as:
  The underlying connection was closed: a connection which was to be kept alive was closed by the server.
  
  I googled and tried all sorts of tricks, like keepalive = TRUE but no joy. Some people suggest that .net has a bug, so I use SOAPUI and SOAPsonar, which returnes same error "the underlying connection was closed." I tried to do the session timeout also not long as possible, still no help, it seems to run out of options, so I tried to configure Oracle HTTP server (instead of the Embeded bridge) a point of entry for /orawsv (I couldn't find any example for this type of HTTP server to help with the configuration of the service web so I took one configuration of the APEX in the dads.conf file) but it did not work , so there is almost the end of my native miracle (no coding) of the web service solution...
  
  The only case for the Oracle SOAP service is: when I use Oracle APEX, it works fine without the floating point operations. It seems that every customer non-Oracle will not take SOAP Oracle of XDB service...
  
  Issues related to the:
  1. someone else has real work situations using the native client NON-Oracle with Oracle XMLDB application web services?
  2. it is possible to configure the server HTTP of Oracle 10 G works with this native services?
  3. I missed any parameter on xdbconfig.xml so will not happen this kind of condemnation to death? (almost everything is by default except the HTTP PORT #)
  
  Suggestions and advise are greatly appreciated
  
  Published by: seanzh on March 17, 2011 10:28
  
  Published by: seanzh on March 17, 2011 10:29
  
  Published by: seanzh on March 17, 2011 10:31

  Oracle APEX doesn't use SOAP or SOAP provider... It uses EGP that is a completely different implementation, the fact that it works or fails is not relevant to the review of native database web services...

  1. someone else has real work situations using the native client NON-Oracle with Oracle XMLDB application web services?

  I wrote a number of applications that use controls of the browser XMLHTTP to call Soap Services... They have been tested with IE and FIREFOX. I also tested extensively with XMLSPY (Altova) SOAP Infrastructure...

  2. it is possible to configure the server HTTP of Oracle 10 G works with this native services?

  No native Web Services are part of the Oracle 11 g database.

  3. I missed any parameter on xdbconfig.xml so will not happen this kind of condemnation to death? (almost everything is by default except the HTTP PORT #)

  Is not sound as it assuming you can get a following WSDL URL

  http://NomServeur/orawsv? WSDL

  SOAP is based on HTTP, which is a stateless protocol, so the connections should not be opened once the request is completed...

  You have (or you can download a trial) of XMLSpy and test with this stack...

  Can check you for all shared servers errors reported in the alert.log, found the trace of the server directory