WRT120N not broadcasting Wireless N

I was wondering if anyone had any input on this situation.  I have a WRT120N router, 1 computer connected to it, a laptop that connects to wirelessy and another computer that connects wireless.  Both the laptop and the 3rd computer have Wireless N network adapters, but they receive only signals wireless g router.  The laptop connects to 54 Mbit/s and the other computer is anywhere from 2 to 11 Mbit/s at any given time.

Now, I have another laptop wireless g I use so much, but I still need sometimes so I can't configure the router to only wireless G.  I checked my router and the network is set to mixed mode.  When I go on all computers and finds wireless networks available it lists my network, but the type of radio is 802.11 g.  I also downloaded inSSIDER and did a scan and he also like a G network wireless. I changed my channel from 11 to 10 as a lot of my neighbors were 11 (I live in an apt), but that doesn't seem to make a difference.

Can someone guide me through to get my router to broadcast wireless n as it should be?

Try upgrading/re-Flash the firmware of the router.

Connect the computer to the router with the Ethernet capable. Download the latest firmware from the site Web of Linksys.

Open the router configuration page. Click the Administration tab and go to the tab sub Firmware upgrade through the firmware file that you have already downloaded and update on the router.

After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure.

Press and hold the reset button on the router for 30 seconds. Release the button and wait 10 seconds. Power cycle router and reconfigure.

See if it works.

Tags: Linksys Routers

Similar Questions

  • WiFi does not work if the SSID is not broadcast by router

    I have a new 55HX929 and tried to connect to my wifi with its built-in wireless adapter. I do not broadcast my network SSID the router for security and privacy. The searched TV network, does not, and then it asks to enter the SSID. Then, it saves the information and trying to connect but fails. If I enable SSID broadcast on the router and then the tv connects fine but I don't have to do. My tivo with its usb wireless adapter works fine with the SSID broadcasts do not when I configure the network settings. On the same stand as the TV with the power of the signal fine. I am currently using a wireless connected to the ethernet jack TV bridge to work around the problem, but it's a waste when the tv should work with a standard network configuration.

    Reading sortiesdvd.com, people have the same problem with NX720 and Sony Google Internet tv. So it seems to be a common problem with Sony games.

    I tried online support chat, and they were not able to help. Everything they told me to do was reset the router and tv which does not help. I don't think they understood that a SSID came from how they responded to my questions.

    Can we get a fix for this?

    Thank you for your messages. We have forwarded your comments to Sony engineering for future updates.

  • WRT54GH will not show wireless! Help!

    Hello to you all,.

    I have a serious problem with this template WRT54GH.

    It is configured with automatic DHCP, plugged into a DSL cable modem to use on a Mac OS 10.6.6 and Win7.

    I used the connection wireless with no problems until today. Suddenly it will not broadcast my connection Wireless by all means!

    I have already created a new connection, tried multiple SSID, passed to B, G, I tried WEP, WPA, different channels, even with the SSID broadcast enabled/disabled and I cannot find the router on any computer.

    I already updated the firmware, reboot the router to the factory settings and tried every tip on the support of Cisco, Google and always avaiable not game.

    The ethernet cable works perfectly, from where I am accessing internet now, but I guess that's not the proper use of a wireless router...

    Can anyone help me on this issue?

    Thank you!

    After all, it was a problem with the router.

    I got this problem change for a new!

  • New Cisco Aironet 1602i is not broadcasting the SSID I place

    New Cisco Aironet 1602i is not broadcasting the SSID I place

    SSID I set up is not broadcasting, so I don't see the wireless network to choose and connect. On my laptop if I choose specify the name of the SSID then I am able to connect to the wireless network. I have only 1 Configuration SSID on the access point. Anyone know how to update the configuration for the SSID is broadcast?

    The green light on the AP flashes and turns off about 3 seconds; is this normal or should it stays on all the time?

    Current configuration: 1842 bytes

    !

    version 15.2

    no service button

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    encryption password service

    !

    host ap name

    !

    !

    Pulse 9 logging console

    enable secret 5 $1$ rrlE$ msWqu8CGY/tpDkgRAAAIe /.

    !

    No aaa new-model

    no ip Routing

    no ip cef

    !

    !

    !

    dot11 syslog

    !

    dot11 ssid Mi Casa

    open authentication

    authentication-key wpa version2 management

    WPA - psk ascii 7 142017070F0C787B7579

    !

    !

    Crypto pki token removal timeout default 0

    !

    !

    username Cisco privilege 15 password 7 112A1016141D

    !

    !

    Bridge IRB

    !

    !

    !

    interface Dot11Radio0

    no ip address

    no ip route cache

    !

    encryption algorithms aes - ccm tkip encryption mode

    !

    SSID Mi Casa

    !

    gain of antenna 0

    STBC

    beamform ofdm

    root of station-role

    Bridge-Group 1

    Bridge-group subscriber-loop-control 1

    Bridge-Group 1 covering-disabled people

    Bridge-Group 1 block-unknown-source

    No source of bridge-Group 1-learning

    unicast bridge-Group 1-floods

    !

    interface Dot11Radio1

    no ip address

    no ip route cache

    !

    encryption algorithms aes - ccm tkip encryption mode

    !

    SSID Mi Casa

    !

    gain of antenna 0

    DFS block 3 Strip

    STBC

    beamform ofdm

    channel SFR

    root of station-role

    Bridge-Group 1

    Bridge-group subscriber-loop-control 1

    Bridge-Group 1 covering-disabled people

    Bridge-Group 1 block-unknown-source

    No source of bridge-Group 1-learning

    unicast bridge-Group 1-floods

    !

    interface GigabitEthernet0

    no ip address

    no ip route cache

    automatic duplex

    automatic speed

    Bridge-Group 1

    Bridge-Group 1 covering-disabled people

    No source of bridge-Group 1-learning

    !

    interface BVI1

    IP 192.168.10.200 255.255.255.0

    no ip route cache

    !

    by default-gateway IP 192.168.10.1

    IP forward-Protocol ND

    IP http server

    no ip http secure server

    IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

    !

    1 channel ip bridge

    !

    !

    !

    Line con 0

    line vty 0 4

    local connection

    transport of entry all

    !

    end

    Hi you must guest mode config on the ssid... Read this bud

    https://supportforums.Cisco.com/docs/doc-5442

    Sent by Cisco Support technique iPhone App

  • Get my F4580 to connect to my network that is not broadcasting its SSID

    I am a user of Apple's Mac, I try to connect my Deskjet F4580 to connect to my wireless network.

    I use a Belkin Pre N1 Wireless router, which is configured to not broadcast the SSID is.

    I tried to enter the SSID manually on the Setup for the F4580, but he can't see it.  I don't want to start broadcasting the SSID because of security concerns.

    How do both speaking to another.

    Thanks in advance

    Arbroathsmokie

    Broadcast your SSID.  Not to broadcast is not a security measure.  Not at all.  It is free on the internet that can read your SSID that you stream or not.  Read more here.

    Use WPA or WPA2 (not WEP, which can also be broken with freeware) encryption with a password strong and enjoy more security and less hassle you have now.

  • datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

    datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

    check these links urself, they spread smoothly on chrome, etc.

    http://www.datpiff.com/pop-mixtape-player-2014.2.php?Mediaid=m24050af & TrackID = 6

    but firefox? Forget it

    The link you provided above also works on my Firefox browser. Maybe you do not have Flash installed or your version is perhaps obsolete.

    Please check if all your plugins are up to date. To do this, go to the Plugin Check site.

    Once you are there, the site will check if all your plugins have the latest versions.
    If you see in the list of plugins that have a yellow button to update or a red button update now , please put to update these immediately.

    To do this, click each yellow or red. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps in the installation process.

  • Satellite Pro P300-1AY does not see wireless networks

    I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
    I replaced my card and it does not solve the issue.

    I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

    I use win XP. Any idea?

    Hello

    You have the latest version of the BIOS?
    If this isn't the case, then you should first update the BIOS!

    The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
    As far as I know, you must use 2.5 or later version BIOS.

    Check it!

  • HP Deskjet 3050 all-in-One - scan wireless; DO NOT print wireless. Just moved.

    Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer.

    Help!  What Miss me?  Thank you!

    Moor_lady wrote: Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer. Help!  What Miss me?  Thank you!

    Hello Moor_lady, if you are using Windows 7, you can try to reset your printer wireless.

    Go to control panel of configuration, devices, and printer and in the menu bar above, select Add a printer in the lower option, select Add a network, wireless or Bluetooth printer.

    There should be another window that shows all available printers to be added. See if your wireless network printer can be found. If so, select this option and continue the process.

  • 14 - r214tx: module not installed wireless, wireless adpater does not not even after reinstalling

    My laptop I have this problem of not being able to connect to a network wireless network.it keeps saying that there are no available connections when there is clearly a lot of available connections. I tried reinstalling all the drivers, and yet, it does not work. I contacted hp support and chatted with them and they suggested me to run a quick test of the ORGANIC system. I did and they said "not installed wireless module".anyone knows how to solve problems?

    Hello @Lincheng,

    Thanks for the quick response!

    If the problem is actually related to the WLAN Module, then using an external WLAN adapter should work.

    I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

  • Computer will not print wireless or network

    original title: my computer is anti-social

    It will not print wireless or network with other computers in the House.  any advice?

    Hello

    1. what version of Windows is installed on the computer?

    2. were you able to print earlier?

    3. are you able to print via a wired connection?

    4. What is the brand and model of your printer?

    5. are you aware of any changes made to the computer, before the show?

    Method 1:

    Temporarily disable your antivirus software, and then print.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

    Method 2:

    Check out the following link.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    I hope this helps.

  • Since arriving in a new home, my printer wireless not working wireless

    Original title: prnter wireless Questions

    I have a wireless all-in-one lexmark x 4650 printer.  Currently, we moved and had to changed internet service providers and now my printer does not print wireless... what should I do to get the printer to pick up the new wireless network and wireless reprint?

    You will need to do the initial Setup again to tell the printer how to connect to your new wi - fi configuration.  Search in the manual.  You probably have to connect via a cable (USB?) to do the installation.

  • keep getting dial ras in windows it can not conect wireless how to fix

    Keep ras dial in windows this on my netbook can not conect wireless how to fix or there at - there no virus program to do a scan of all the programs I checked is not compatible win this

    Hello

    I suggest you to see link below and check if it helps.

    http://support.Microsoft.com/kb/159360

    Hope this information is useful.

  • MX410 does not scan wireless using Mac

    Hello

    Recently, I was forced to create a new user on my Mac (OSX Yosemite), and since then the scanner on my MX410 does not work wireless. I get the message:

    Cannot scan for these reasons:

    -Scanning is off.

    USB - cable is disconnected.

    Please check and try again.

    Scanner driver will be closed.

    2.156.0

    If I change users for older users, it works very well. If I go into System Pref/Printers & Scanners/Scan/Open Scanner it scans very well wireless.

    Any suggestions or recommendations?

    Thank you

    Using Navigator MP EX or ImageCapture? If you use MP Navigator, make sure you check the settings on the new users to make sure that it is looking for the network version of the scanner.

    http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&SECU...

  • Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft. Please notify.

    Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft.

    My Toshiba Laptop Windows XP Media Center OS is currently being updated with the exception of a point to update MS Office 2003 #KB949074

    has no size to him.

    Please notify.

    Kind regards

    Adolph Moret

    A call back to Epson says my Windows Firewall blocks printing Epson Status Monitor and by disabling the firewall every thing returns to normal.  Turning on the firewall without exception is still no difference and I should contact Microsoft for that matter.

    If the application works when the firewall is disabled, but not when the firewall is turned on, so you must create an exception for the application.

    I don't know what you mean by "turning on the firewall without exceptions still makes no difference" - no difference of what?

    You must determine the name of print Epson Status Monitor, then go to control panel > Windows Firewall (if your control panel is using "Category view", you will find Windows Firewall in the Security Center).

    Once in the Firewall dialog box, click the Exceptions tab, click the button "Add a program" and find printing Epson Status Monitor.  If it is not in the list that appears, click on the button "Browse".  After selecting the program and click OK, make sure that on the general tab of the Firewall properties dialog box that the "do not allow the box exceptions" is NOT checked.

  • HP Officejet 150: Can not scan wireless

    I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

    Hi @Dragonbebe,

    Welcome to the HP Forums!

    I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

    This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope that answers your question and have a nice day!

Maybe you are looking for

  • The work of does ' t Fn + F5 on my unit

    Dear Sir/Madam I want to use the TV-out but it does not back. I tried Fn + F5 and Toshiba controls buttons. Also, each of them do not work.And the Toshiba power Saver does not work when I start my laptop. Could you please help me with this? Thank you

  • HP 15-f337wm (touch): assistance to recovery hp 15-f337wm (touch) or nuisance?

    Bought this laptop about 2 months of Wal-Mart. $210 sounded just to its specifications. I had decided to try to install OS Parrot with my 1064 bit OEM of Windows as my first home. From there, I had nothing but trouble. I had to disable the secure sta

  • Hard drive is IDE mode AHCI mode or during installation

    I have a SATA hard drive and I don't know if it has been set to IDE mode AHCI mode or during the installation of Windows XP.  I bought a new motherboard and when I connect it to the hard drive I get the fault of starting system if my hard drive is se

  • WRT160Nv2 - don't know the user name and password

    Hello, im trying to access my router wireless via 192.168.1.1 When he asks for username and password, I made... User name: (BLANK) Password: admin But it does not work, I think that maybe I changed the password at some point, but I'm not sure. Is the

  • TrackPoint does not work in iTunes and openoffice

    Hello the scroll option, when I use the middle of the trackpoint button does not work in itunes and openoffice. It works well in all others. I have the latest versions of these programs and the latest driver for the trackpoint. IM on Win XP with SP3