WRT120N to Xbox 360 Wireless connection

Hello

My wrt120n worked perfectly with my xbox 360 until two weeks ago. I can connect to xbox live without problem but unplug it always within 10 to 15 minutes, my PC doesn't have this problem.

My SSID and WPA2 Personal are correctly configured. I have forwarded ports 53-3074 Beach, yet I always disconnect. My NAT is not upward too strict or moderate. When I look at my network on the 360, it abandons the connection entirely for about 3 seconds and it finds automatically. My IP are staticly Setup. My firmware has been upgraded.

Any advice would be appreciated.

My 360 has been positioned behind my PC from my router and was causing the outcome that seems. Anyway, problem solved, no shit was due.

Tags: Linksys Routers

Similar Questions

  • Xbox 360 Wireless Gaming Receiver PC connection problems

    I recently bought the Xbox 360 Wireless Gaming Receiver PC and installed the drivers, I pressed the 'Connect' button on the two. They cease to 'Spin', but the controller keeps blinking. I've seen more people having the same problem. It is NOT the batteries.

    Hello

    Answers has no influence on the XBox or XBox Live must
    contact with them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My xbox 360 Wireless continues to disconnect from my router, what can I do?

    Whenever I am chatting with my friends, that it takes about 45 minutes to connect and stay connected, every other time he connects for half a minute, then disconnects again.

    Hello

    Try the procedure described in the following article:

    "Your Xbox 360 Wireless Controller disconnects frequently or cannot connect to your Xbox 360 console": http://support.microsoft.com/kb/911111

  • Can I use xbox 360 Wireless & the windows wireless receiver so that I can use two controllers in Windows?

    Original title: Wireless 360 controller.

    I bought the gamepad 360 Wireless for windows and it works fine. I also have an xbox for xbox 360 wireless controller. Can I use with the receiver windows wireless so I can use two controllers in windows? When I click on the Green x button it keeps just Charlotte. Is it possible to connect to windows?

    Thank you. In fact, I installed this software already, but thanks for the tip. It turns out that I had to click the button of synchronization on the top of the controller AND the usb thing. I think I was just clicking on the USB thing. Now, it works fine. It's never the best stick for windows. THX.  :)

  • my USB doesn't register that my xbox 360 wireless receiver is plugged!

    I have windows 7 installed on my computer. x 64.

    I can't save the computer I plugged the receiver, when I plug the rceiver turns on (green LED flashes). This device does not appear in the device as an unknown device manager, the bubble (installation of new equipment) never come when I plugged in the device. I installed the driver of wireless controller from the microsoft hardware site.

    I followed the instructions out of the many sites, most of the steps I just can't follow because everyone elses computer seems to show this "unknown device" in the Device Manager. So I can't manually install drivers into something that isn't really there.

    This is a real piece of equipment of microsoft and has the hologram on the bottom, it is a controller for the PC black Wireless receiver that came with a disk configuration, v2.0.2. The installation program provided on the disc does not start as it as "microsoft this has blocked due to compatibility issues". I even tried to download an update of compatibility from the microsoft Download Center, but as I have to enter a code of genuine validation and the validation tool does not work can't do that either. I went directly from windows XP to windows 7, my computer is two days old.

    If someone can provide me with any useful information I would appreciate it really, im starting to think I might have a broken unit, but I never thought it would still light up. I also tried all 6 available usb ports on my computer but it still does not detect the device as new hardware. I will quote once again as the only solution that I find online seems to be with regard to updating the "unknown device" in Device Manager, this unknown device does not exist in my device manager.

    Kind regards

    Tom

    Hi Tom,

    1. what compatibility update you tried to download?

    2. what was the code of genuine validation, you need to enter?

    3 did you receive an error message when the validation tool has failed?

    You can visit the Xbox support articles and check if it helps:

    Connect a game controller

    Xbox 360 Wireless Controller disconnects or unable to connect

    Troubleshooting controllers, headsets and wireless Xbox accessories

    If the problem persists and you need help, you can contact Xbox support:

    Xbox support

    Xbox forums

  • 2012 update Xbox 360 Wireless Controller? Why is there not a?

    I wonder this for about two years now.
    Microsoft is generally quite well to this kind of thing.
    If it is not broken, I guess that she doesn't deserve any attention good huh.
    I was looking for a driver for this Xbox 360 wireless controller.
    The variety of PC mine is one that is very rare now, I believe that the innovator was "egg".
    In any case its identical to the Xbox 360 consoles computer only wireless controller uses the usb port and connect it to the computer.
    Just want see an update for this product...
    If not why not?

    Hello

    Answers has no influence on the XBox or XBox Live must
    contact with them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Xbox 360 Wireless Controller and Windows RT (Surface)

    Hello

    I have a Microsoft Surface and would like to try my game controller Xbox 360 Wireless with it that says Microsoft is compatible it seeks here (http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home).

    I have a play and a cordon of charge I Plug and results in the Xbox controller picked up like "Controller wireless Xbox 360 via Play & Charge Kit" at devices however I don't seem to be able to use the controller to play all games (3D Rocket Riot and Skiddy the slippery Puzzle are the only ones I've tried so far that mention Xbox controllers support).

    The controller plugged and pressing the Guide (the middle one), the buttons turns green flash just like its looking for something but do not pick up anything.

    So the big question...

    What I am doing wrong?

    I have not tried the controller wireless Xbox 360 on the Surface, but I know that even for general computing, you need a receiver of the controller wireless Xbox 360, not only play & Charge Kit: this device, exactly as his name, cannot charge your controller, and can't do anything else, for example, connect the controller to any other computer , or whatever.

  • Where is the serial number Xbox 360 Wireless Controller?

    Where can I fint Xbox 360 Wireless Controller serial number?

    Hello

    Click on the link and see if it helps.

    How to find the Xbox product serial numbers

    http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/serial-number

    You can also contact Xbox support.

    Welcome to the Xbox support

    http://support.Xbox.com/en-us/

  • Xbox 360 Wireless Gaming Receiver - this is going to work with a remote xbox?

    Hi, I have the xbox 360 Wireless gaming receiver and I am trying to get a remote control for it.  Does the xbox 360 remote sync to the xbox or is it just regular IR

    Thanks for your help

    The xbox 360 remote control Infra-red, the 360 has an IR receiver port.

    The wireless gaming receiver is radio only, so will not pick up the remote control. There isn't AFAIK a 'remote control' for the wireless receiver such that it has a validity of the Protocol only for xbox 360 Wireless devices, although there are a lot of 3rd inventive party accessories available, there might be something. You can of course use one of these wireless devices as a remote for other applications with the right software (xpadder, beam, etc.).

    The Xbox 360 remote control can be used with a PC using an IR receiver, but it's not plug-and-play, here is a solution: http://www.redmondpie.com/using-xbox-360-ir-remote-with-vista-media-center/

    Other that that, there are a multitude of remotes for PC, IR and wireless (including bluetooth). Bluetooth is the option if you want to keep your number of receivers plugged into your pc to a minimum, however, IR is still much better for the battery of remote controls (why it is still used despite the benefits of the radio).

  • Back on the racing wheel Xbox 360 Wireless Gaming Receiver using in Windows 7

    When are we going to get the drivers of the ffb for the pc for xbox 360 Wireless wheel

    Proud member of the clan of AngelZ @ [url = www.esports-angelz.co.cc] [url] Clan site

    Hi s3ti1690,

    Thank you for visiting the Microsoft Windows seven community site. The question you have posted is related to the Xbox and would be better suited to the Xbox Discussion groups. Please visit the link below to find a community that will provide the support you want.
     

    So far there is no information on Force feedback drivers being developed at the moment.  However if you want to leave comments with Windows 7 team to ask that this driver then here is a link: Windows 7 comments  

    Aziz Nadeem - Microsoft Support
  • Xbox 360 Wireless Controller is compitable with Windows?

    Hey, I have a question, does the Xbox 360 Wireless controller compitable with Windows too?

    Please help me.

    Hi Destinyhope,

    Yes. Xbox 360 wireless controller is compatible with Microsoft Windows.
    For more information and assistance on the Xbox 360 wireless controller, click on here.

    Let us know if that helps.

    Kind regards
    Clement Kumar.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I get audio with my Xbox 360 HDMi connected to my HP 22bw monitor?

    I got this montor and I have my Xbox 360 to connect him with HDMI.

    I have a Turtle beach headset and I have this card that I used on my Tv with HDMI.

    Whenever I have plug this adapter into the monitor said that HDMI is not plugged.

    Is it possible so I can have these plugged in.

    It's the adapter.

    I fixed it. I just had to turn off 'Auto switch Source '. Don't know why it is was playing with her.

    Thanks for your help.

  • Xbox 360 Wireless network adapter driver

    I am currently using OS of Microsoft Windows 7 64 bit on my computer. When you use the adapter wireless Microsoft Xbox 360 with the drivers provided by Microsoft, Windows recognizes 5 'axis' and 10 'buttons '. Windows axis recognize are: X rotation, rotation Y (right stick), X axis, y-axis (left stick) and the Z axis is left and right triggers. My question is about the Z axis and the Guide button. Why the two triggers control the same Z axis? Also, why can't assign the Guide button to function? This driver provides Microsoft does not allow to link triggers to 2 different functions and use these 2 functions at the same time (for example: for while fire) because the left and right triggers neutralize! Having the left trigger that the right and rotation Z fire as Z axis (or left trigger button 11 and right trigger button 12), as well as assign the key Guide key 13, you need to uninstall the (UN)? supported Microsoft Driver for the adapter Xbox 360 Wireless and replace it with a written by a Japanese man named Masahiko Morii. Why? Why Microsoft doesn't have a Xbox 360 wireless adapter driver that is configurable to assign the Guide button to function? Why don't they have a driver that is configurable to assign the left and right triggers to 2 separate lines? Why can I not pay the linearity or sensitivity of the dead zone of the controller with the MS driver? Why can not I have 4 lights on the controller flash or rotating with the Microsoft driver, and yet I can with Masahiko Morii driver? The 360 controller is great, but how is it, Microsoft makes bad drivers for it when you use it with your PC?

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    With the help of the joystick Xbox 360 for Windows
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

    Set up your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

    Troubleshoot your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

    For most of the problems of Xbox:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Two Xbox 360 Wireless controllers Microsoft will interfere with each other?

    * Original title: Microsoft Xbox 360 for Windows wireless controllers... Two will interfere with each other?

    Controller: Microsoft Xbox 360 Wireless Controller for Windows (JR9-00011)

    Operating systems: Windows 7

    I have two PCs located in the same room. Is it possible to set up a wireless for each of them so that they do not interfere with each other?

    Hello

    I would like the links and see if it helps.

    How to set up your Xbox 360 to your Windows PC controller

    Set up your Xbox 360 for Windows gamepad

    If you have other questions, please post your request in the Xbox forums for assistance on this issue.

    http://forums.Xbox.com/

    Hope this information helps.

  • Xbox 360 Wireless Receiver (not geniune) with Windows 7 64 bit?

    Hi, I intend to get a Xbox 360 wireless receiver, but I can only find is not geniune/third party products on ebay, but I have the 64-bit operating system. Descriptions for example (on ebay) "not compatible with windows 7 64-bit") is on their CD is not to have the 64-bit driver, (so if I download from microsoft.com, it will work) or it does not completely work?

    Thanks for the help.

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • cDAQ and NI 9205 NI9203 NI9225 problem with the detection of modules

    Hello We bought a cDAQ-9188 and modules NI 9205 NI9203 NI9225. My problem is that the MAX does not detect these modules. The cDAQ must be correctly installed and configured as it is in the list of devices. I checked the monitor of the device is runni

  • Error-8260 occurred at ISOTP Receive.vi

    Hello world I'm trying to use the Automotive Diagnostic command set to read the settings from the ECU. When I run my program I get this error, only error-8260 occurred at ISOTP Receive.vi. Possible reasons: Set of car NI Diagnostics commands:Diagnosi

  • Good image oblique

    What tools are available for NI Vision to tilt the image properly?  Example of attached image and it should be square. Thanks in advance!

  • Old updates

    Can I delete/remove old updates?  They take a lot of space.

  • How can I delete the files from hard drive update?

    Whenever I download some updates of drivers and programs to my PC via the HP Support Assistant, the program downloads firmware like spXXXXX and then decompresses them in C:\SWSetup folder in order to install them. Now, I see that this folder is not e