WRT150N running on the desktop computer crashed

Similar Questions

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• View the programs that are running on the remote computer.

  How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

  Do you mean the Task Manager?

  If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  You might also find something in the PsTools collection...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

• Lightroom Mobile running on a desktop computer

  I swear I've seen people talk about Lightroom Mobile running on a desktop computer.  I have Lightroom CC 2015, but cannot find a way to run Lightroom Mobile on my Windows PC.  I am interested in looking at Instagram option in Lightroom Mobile.

  Also, I have a Mobile of Lightroom sync which seems to be stuck.  How can I delete that?

  Thank you

  Well, I solved my sync being stuck by removing a sync to mobile framework from another collection.  Unfortunately, my LR Mobile has no open option to for Instagram mentioned in the article.  The feeling that it is a thing of Android, as I tried on two devices.

  Thanks for the help.

• vdmadmin to assign the desktop computer?

  I'm giving entilements to a user in AD to access your desktop using the vdmadmin.exe command line interface.  I use VMware View Administrator 3.1.0 build-167577.

  Here is an example of what I am running and see:

  C:\Program View\Server\bin VMware & gt; vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  When I look at the web administration interface after the above command I don't see this user, such as the right to use the desktop computer.   Sign in using the customer discovers also fails.

  I received the command from this article: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 100752

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  phife757 wrote:

  C:\Program VMware View\Server\bin > vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  There is no option for vdmadmin command line allows users to a desktop computer, only for (UN) assign a VM specific to them within a pool of persistent. You must use the administrator user interface to set up rights to the office. recommendation of davesherman to manage rights for large pools of office using ad groups is a good way to go, you can then change the rights by changes to scripts in the group.

• How to stop firefox to shutoff valve of the desktop computer

  have not been able to stop the desktop computer, while in firefox there is no button on the keyboard

  Hi, I'm still not quite sure if I understand your question. However, the stop button is something that will always be handled by your operating system and is usually to be found within the user interface of your browser.

  http://Windows.Microsoft.com/en-us/Windows-8/how-shut-down-turn-off-PC

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• I need to disable a copy of Dreamweaver CS5 so that I can activate it on another computer. The first computer crashed, so the program is more about it. How do I disable?

  I need to disable a copy of Dreamweaver CS5 so that I can activate it on another computer. The first computer crashed, so the program is more about it. How do I disable?

  I was finally able to get on a chat session with an Adobe employee and the problem has been resolved. She told me to "Skip This Step" then screen here and it worked (when I had tried that before, it did not work, but that was before the deactivation was made for the computer on which crashed). I hope that this will not cause any kind of problem ID and password in the future, but for now, the program is back up and functioning normally.

• I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to disable the other computer without using this computer?

  I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to deactivate the license on the old computer without using it?

  you are allowed two facilities, activations, you should may not disable before activating on your new computer.

  But if you don't, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html.  Ask a county of activation reset.

• On the first: can CC Adobe and Adobe CS6 both run on the same computer?

  Hi, I have the Adobe Premiere CS6 installed in my computer.

  But now, I'll finish the editing of a film that someone already started to edit.

  This person worked with Adobe first CC.

  Question: if I install Adobe CC in my computer, the Adobe CS6 will still be run?

  Can CC of Adobe Premiere and Adobe Premiere CS6 both run on the same computer?

  Of course, you can run all versions of the same computer, even you 2014 CC, CC as well as 6 CS on the same computer.

• Problems with the desktop computer, phone and Tablet Design

  Hi all

  As soon as I download my phone design that is all I get, phone design in each desktop browser, iphone and Tablet I, how do I MUSE use view PHIONE for phones, tablets for the Tables and VIEW of PHONE NOT ONLY in each device, a computer or a browser. -They only way I can see my design office is by removing the phone design.

  Any help appreciated.

  TX

  Hello

  I just check the site in my phone and the desktop computer. His office showing the desktop version and the version from phone to phone.

  Please clear the cache of your browser on the desktop browser and return to the site. If it's a windows machine, the shortest way is to press Ctrl + F5.

  Concerning

  Vivek

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html

• my HP desktop computer crashes after a few minutes, no matter what I do...

  my desktop computer HP computer crashes after a few minutes, no matter what I do... everything and anything that is running stop... including antivirus, downloads, etc. nothing is responding and the screen is just frozen and I have turn off and on again manually to be able to use again. I've used the microsoft patch, updated drivers, windows and microsoft updates, check and remove any incompatible program, I removed all programs, toolbars, any outdoor installation... He basically just vista windows running programs, my Internet speed is fine... What can I do to solve this annoying problem?

  Hi how?

  you fixed your pc?
  I have the same problem: x

• The menu icons and desktop start missing after the start of the desktop computer

  Original title: I do not see my bar of tasks or deskop

  When I start windows xp, I don't see the start menu or the desktop icons, only the desktop wallpaper. I was able to access the internet Explorer via windows Task Manager...

  Help me please! :))

  Hi Daannii,

  1. don't you make changes before the show?

  Try the following steps to start a process of the Windows Explorer and check the result.
  a. start your computer and boot to the desktop.
  b. press CTRL + ALT + DELETE, and then click Manager tasks.
  c. click on the file menu, click New task (run...).
  d. type % windir%\explorer.exe, and then click ok.
  e. restart the computer and check if the problem persists.

  For additional troubleshooting steps, see the following article: http://support.microsoft.com/kb/318027

  Visit our Microsoft answers feedback Forum and let us know what you think.