WRT160N cannot stay connected!

Similar Questions

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• WRT320N cannot stay connected wireless

  I have the wrt320n in a nut shell, that my question is wireless, the unit does not see my other wireless network, appears and tell appears.if I change encryption to no work ecryptions for a day or two, then back to the same problem, my network does not appear, is not a problem of signal may be rite next to the router and the same problem , off defender net work, at least, I think that anyway off spy wear, anyone with a solution?  the only thing stay connected is hard computers cable.

  Thanks for the info last adapt wirekess auto to manual control and automatic 20 htz past only did the trick, thanks again

• I can connect to the internet, but cannot stay connected to thn over 10 to 15 minutes.

  After I changed my MiFi for a Verizon 890 L 4 G LTE Verizon internet access I can access the internet for about 10 to 15 minutes. He stops abruptly, but when looking at the network and sharing Center to watch I am always connected. When I run the troubleshooting it says that there is no problem. When I look in the detail section of the troubleshooting it is said that there may be a problem, but there is no additional information available. The thing really strange is that my wife and I have exactly the same computers and the OS and his computer has no problem to stay connected. I found a update for my card driver and it made no difference. I am at a loss now other solutions. I also put the hotspot in WPS mode hoping it would reconfigure the communication between it and my laptop, it made no difference. Help please.

  Hi kodibear333.
   
  
  Thanks for posting your query in Microsoft Community.
   
  I understand from your description, that you have a problem with connecting to the Internet.
   
  Could you please answer the following questions so that I can help you better.
   
  
  1. don't you get an error message when you are disconnected from the internet?
  2 have you made changes on the computer before this problem?
   
  
  I want you to try the following methods to resolve the problem.
  Method 1: Network connectivity problems
  Check out the link and follow the steps in the link.
  http://support.Microsoft.com/kb/936211#appliesTo
   
  Method 2: Wi - Fi and network problems.
   
  See the link and the steps mentioned in the link.
  http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1.
  Get back to us and let me know the status of the question so that I can fix it as soon as possible.

• Cannot stay connected to the internet

  I have an Inspiron E1505 w / windowXP.  I use an Intel Pro wireless connection. Through a Linksys router.  When on AOL or IE, I get finally starts off.   Sometimes, but rarely I can stay connected for an hour of time it starts me after 5 min.  All the various moments. Sometimes it boots me to the blue screen.  I have connected via ethernet directly and did not have this problem.  This problem has been for about a month or two, the previous year that it worked perfectly.  So I guess it's in my wireless connection.  A Tech asked me to completely restore my computer but I am hesitant to start it if it could be something to the difficulty. I restore to a checkpoint two months back.  This did not help.   Any ideas?

  
  

• Cannot stay connected - El Capitan

  Our iMac mid-2010 has recently developed a behavior where if a user connects, he will accept the password, go to the screen of the user, but in the 10 to 30 seconds will gray out and return to the login screen.  There are 5 user accounts on the machine and it happens with all of them.  We do not add any software or hardware that we can think of that would have triggered this.

  I have (1) run the Disk Utility first aid SafeMode (I can connect mode without failure); (2) reset the NVRAM; (3) attempted to delete the launchservices.csstore files in the private folder.  I'm under 10.11.6.  My original CD are for Snow Leopard, which I have not tried to use again.  I have 2 months, Time Machine backs up that if we return to that would be ok.

  Any suggestions on how to approach this?  Or what it would cost to go to the Apple Store?  The machine is 6 years old and works fine, but I wouldn't put a lot of money fixing vs possibly buy a new one.  Thanks in advance.

  Make it a full restart or just cycle back to the login screen?

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• Cannot stay connected in my Yahoo.

  I use MY YAHOO as my home page. I connect to Yahoo and also check the box to me signed to keep. If I close the browser and then reopen them later, I have to log in again to return to my personalized MY YAHOO page. I'm not delete all cookies. I can't seem to understand what I put (or not) in order to avoid this. I don't have this problem with other browsers. I prefer to use Firefox. Any suggestions?

  Based on your 'more system details', you have Firefox set to automatically start in private browsing mode. Although Firefox seems to work quite normally, cookies stored in private browsing mode are deleted when you close the last private window.

  To switch the way you manage privacy, you can open the Options dialog box on the Privacy panel using:

  "3-bar" menu button (or tools) > Options > privacy

  Change of "conservation rules: never remember history" to "Firefox will be: use the custom settings for history".

  Then uncheck "Always use incognito mode" and (after a reboot, I think) change your cookie settings and history at your convenience.

  What I suggest is to change the duration of General cookie to ' keep up: Firefox is closed. Click on the Exceptions button and enter in yahoo.com , then click on allow to make your Yahoo cookies are saved according to the expiration defined by the site.

  Success?

  (In some cases, you will have to go in show Cookies and delete existing Yahoo cookies before the site can define those persistent.)

• Brand new series of Premium computer HP HDX 18 t cannot stay connected to the internet

  The home network works well.  There are two othe Mac laptops and a desktop dell who have no problem with the internet connection.  The network is on the HP laptop as excellent connection.  But when I go to the internet I usually only about 5 minutes before it stops working.  No browser can bring up any Web site.  I can't reconnect without forcing the entire domestic network turned off, then on again.  Then I will have about 5 minutes more on my HP laptop before mess up again and loses the internet.

  This HP bought to replace my old slow computer.  But without the internet, it is useless.

  Can someone help me please?

  Since automatically allowing the the new update of the driver, then INSTALLING AIM on my computer... everything is good enough for me.  It remains on the internet for longer periods of time and when it does not leave the internet, auto AIM restarts to near seemlessness.  I work for AOL, and I had no idea of PURPOSE did this - but I don't mind a bit.  I'm really very proud. Not that I had something to do with it (I'm a photographer)

  I'm marking my problem as "almost resolved" and I will only come back to this area if I have additional problems.

  Thanks for the help everyone.

• Problem to stay connected to the internet through the wireless router.

  I'm having a strange problem.  My computer will stay connected wireless for anywhere between 2-30 minutes before losing connectivity.  However, it works when I plug it into the router, which is what I'm doing now.  I have tried everything I can think of to eliminate the problem, but it has not changed.  Usually, once it shuts down it will stay off until I have change the frequency of router or something.  Reset the router works every time some time, but nothing is definitely the problem.

  I disabled ipv6, reset the router, update windows, restarted several times that I have unplugged router and modem, reconfigured frequency channel of the router, among other things.

  It must be a problem with my computer because my roommate both have computers that are working properly.  In addition, it is a relatively new problem.  I've had my computer for a few months now and it has worked well up until that 2 days ago.

  Any help would be greatly appreciated.

  Thank you

  Hello

  I would try the underside and then if no joy try a system restore to before this happened - don't worry
  the system restore without the bottom as the issue will probably come back. And if you always do
  a system restore and then repeat the underside when even because all will be back to old drivers and settings.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Please do this 1 and repeat if you need to do a system restore:
  
  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Photosmart B210e stay connected to the PC (wireless)

  Hello

  I'll give you my specs first:

  HP Windows 7 64 bit hard PC connected to the security of WPA-PSK/w N + Router Belkin Wireless.  The printer is connected to the network wireless about 15 feet from the router.

  I have problems with my Photosmart B210e stay connected to my computer.  The only way I can get my computer to see my printer is to restart the printer.  After the printer starts I can print from my computer for about 10 minutes.  After that the computer can no longer maintain a connection with the printer.  According to the screen on the printer, I'm always connected to the network, but when I try to print I always get an error to the effect of the computer cannot establish a connection with the printer.  I have to restart the printer if I want to print again.  I don't have another computer to install the printer, but I can send an e-mail to my printer from my phone which will print when my computer does not see my printer.

  I had the printer for a little over a year and it has always done.  I don't post things very often, but I still don't think it is necessary to be able to the printer whenever I want to print cycle.

  According to the Product Support page there is an update for my printer.  When I try to update the printer from the screen, he says: my printer is up to date.  I tried to update several times and it has NEVER been an option to update, so unless that updates are automatically applied I'm not sure why my printer cannot find the update.  On the product page there are also drivers of the 11/2010.  I bought my printer from Best Buy in 01/2011 so I don't know if I have the latest drivers.  However when I try to download and install the installation always fails me give no description as to why it failed.  He told me then it downloads a solution to the problem and installs an icon on my desktop.  As soon as I click on this icon, it says that it cannot be used because there is no internet connection, which is not true because I can open a browser and surfing very well.

  -J' tried to activate power saving mode that didn't work.

  -J' I attmepted to run the HP network diagnostic utility.  If I run it, as soon as I start the printer it works and shows that there are no errors, if I wait 10 minutes and try to run it does not find my printer.

  -J' I attmepted my printer of the assign a static IP address, I still have the same issues

  I'd appreciate any help that could be given, thanks for your time.

  Rob

  Routers Belkin have had some problems with HP printers.  Make sure your Belkin has the latest firmware.  Use the Belkin CD to do this.

• Inspiron E1505 having to stay connected via the wireles lan

  As of the end of the wireless lan or the wireless internet to my laptop works intermittently or not at all. I am running Windows XP Home edition Media. The laptop used to connect to my router wirelessly with no problems and stay connected. I did all the evil that shooting the self-help site Dell says to do. I can see my wireless router and that you have entered the WEP key. I downloaded the updated for the wireless card drivers. I have another laptop in Vista that will connect to the same router without problem so I'm pretty sure is not the router. When the connection is de-energized, I go to the network connections page and see that the wireless network connection has a red X through it. After that some playing around, I have may come back, the red X goes.  When I right click the wireless internet to wireless networks available veiw upward opens a screen that says "Windows cannot configure the wireless connection. Any suggestions?

  
  

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I can't stay connected on several websites bookmarked.

  I have a new laptop. On the previous laptop, I was able to stay connected on these websites bookmarked.

  A detail as a website to remember you (automatically log you) is stored in a cookie.

  You can use these steps to make a Web site recognize and remember you:

  • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
  • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

  In case you use 'Clear history of Firefox closing' or otherwise to clear the history.

  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history
  • Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.
  • Deletion of Cookies will delete all selected cookies, including cookies with an exception to allow that you want to keep.

• Re login gmail, don't want my address to show, don't want to stay connected

  When I click on my gmail icon, the screen my email address; I don't want it. And when I'm in my gmail I don't want no "stay connected"; I don't want to have to log out manually. Recently, all I had to do was 'x', and I was disconnected automatically. I want that this again!

  When you say that you would 'x' out, do you mean completely close Firefox?

  By default, Firefox will save cookies for as long as Specifies a site. However, you can override that for Firefox rejects cookies when you stop. You'd do that here:

  "3-bar" menu button (or tools) > Options > privacy

  If the middle of the box says, "Firefox will be: don't forget history" change that for ' Firefox will be: use the custom settings for history. That reveals a set of detailed controls.

  Under "Accept cookies from sites" change "keep until the" to "closing of Firefox".

  To get rid of existing Google cookies with longer periods of life, click on the 'Show Cookies' button on the right and in the search box at the top of the page type GOOG. This should focus on your Google cookies and you can delete them individually here.

  The next time you visit Google, Firefox should affect the expiry of the cookie at the end of the current session.

  Makes you want to do?

  Alternates:

  So MOSTLY only desired session cookies, but there are a FEW SITES that should recognize you any longer, you can give those sites permission to dΘfinir of persistent cookies.

  If you ESPECIALLY want to persistent cookies and don't want cookies from CERTAIN SITES to evaporate at the end of the session, you can keep the normal setting in privacy but change permissions for sites of memory.

  To change the permissions of cookie for a specific site, use the Page Info dialog box. Either:

  • Right click and select View Page Info > permissions
  • (menu bar) Tools > Page Info > permissions
  • Click on the padlock or globe in the address bar > more information > permissions

  Under 'Cookies Set' clear the default checkbox and set the permission for the site:

  • On = persistent cookies
  • Allow session = session cookies