WRT160N guard dropping Internet when you transfer large files or using the Zune software
WRT160N wired for 3 PC (only regularly on 1 - Vista), Wired XBox 360 on or off - does not seem to effect things) (normally closed) Wii wireless, wireless laptop Vista
Everything works fine, except when I download either a file (for example when my Zune software is downloading podcasts each day), or when I transfer or access files on the network (copy or modification of the files of the laptop on the desk)-any attempt to do something on the internet is to expire. I don't lose my connection, just cannot get anywhere.
Any help is appreciated.
Recently, I made the following revisions, but have not seen a significant improvement:
Wireless settings should be band Radio frequency should be 20 MHZ OF the self
First check if the same thing happens the modem If yes contact you ISP.
Please disable all firewall, antivirus and alarms on your computer and if the problem affecting the area.
If then still reduce the MTU size to 1200 and update the firmware on the router, follow the steps to update the firmware of the router.
Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...
Follow these steps to upgrade the firmware of the device: -.
Open a page in Internet Explorer browser on a computer hard wired to the router...
In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.
Now reset your router:
Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router... This should solve your problem.
Tags: Linksys Routers
Similar Questions
-
When you transfer large files of network, all other requests are not sent to the server
In our application, we are facing a weird scenario where we try to download a huge file(600+ MB) of the network, all other requests (AJAX) are getting blocked. But when the same file is downloaded from the local location (drive E) so that everything works fine.
How do you download the file via the network?
If you want to solve the bandwidth? and the nets where a process takes previous on the other, you will have to troubleshoot the QoS of the network on what see you.
To give a better visual, please, use Firebug or Web Developer tool, called network analysis applications. The "XMLHttpRequest" will give better clues for Ajax. Reference http://ajaxian.com/archives/ajax-debugging-with-firebug
There may be a topic: configuration option that allows persistent connections per server, you can check mutithreading or max.
-
Error 0 x 80070057 when you transfer .apk files
Hello, I'm speedcreature. My laptop can't transfer files, especially files .apk for my Tablet directly. This includes files in .docx, .xlsx, .pptx, and others. I can always use a flash drive or my microSD card to transfer these files indirectly, but the method has become cumbersome and tedious. Is there a way I could transfer files from my PC to my tablet directly? Thank you.
PS my laptop OS is Windows 7 Ultimate, and it has more or less 385 registry errors. I don't have the means to repair them using registry cleaners, because I'm running out of money. I have to resort to more complicated ways if I want this problem to be resolved.
In addition, my Tablet OS is Android 4.0 Ice Cream Sandwich. I think that this would not be the source of the problem, but I hope that the above information could help solve my problem.Hello
You can use Windows easy transfer cable to transfer files from one computer to another computer.
Method 1: I suggest you try the steps from the following link:
Transfer files and settings from another computer
http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer
Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence. -
When you delete a file in Windows Vista, the dialog box remove don't close until the computer is restarted. It is sometimes possible to remove it by closing tha task list. When this is done, the Explorer is closed and restarted.
Hi Brian,.
(1) since when are you facing this problem?
(2) remember to make changes?
Method 1: Run the fixit available in the link below and check if that makes a difference
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files
http://support.Microsoft.com/kb/929833
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Photoshop 2014 (Win7) crashes when you save large files
Hello
A new user in our design Department has problems with its Photoshop 2014 frequently crashing when saving large files.
It runs on a new brand PC (Windows 7 x 86), which has all the latest drivers for hardware and Windows updates. CC Adobe indicates that no update is available for Photoshop.
After installation of the product, I'm not particularly familiar with Photoshop, so apologies if it is a common/known issue that I'm not aware of.
I don't think it's a hardware problem as only Photoshop is having these issues (the user is also AutoCAD 2014, which works perfectly). However, I ran Memtest 86 + all night, who reported no errors.
Here is a typical crash report and also a copy/paste info from System. If anyone has any suggestions, I would be grateful.
Thank you
Dan
The failing application name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480306d
The failed module name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480306d
Exception code: 0xc0000005
Offset: 0x0184c61d
ID of the process failed: 0x1f18
Start time of application vulnerabilities: 0x01d0784d3e5fc316
The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32-Bit) \Photoshop.exe
Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32-Bit) \Photoshop.exe
Report ID: 7167659a-e442-11e4-bee9-a0d3c14cdcb5
Fault bucket 708883045, type 17
Event name: APPCRASH
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: Photoshop.exe
P2: 15.2.2.310
P3: 5480306d
P4: Photoshop.exe
P5: 15.2.2.310
P6: d 5480306
P7: c0000005
P8: 0184c61d
P9:
P10:
System information:
Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 32
Operating system: Windows 7 32 bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 4
Number of logical processors: 8
Processor speed: 3591 MHz
Built-in memory: 3511 MB
Free memory: 2180 MB
Memory available to Photoshop: 1592 MB
Memory used by Photoshop: 70%
Multi-frequency 3D printing: disabled.
Windows 2 x UI: disabled.
HighBeam: enabled.
Tile image size: 128K
Image cache level: 4
Overview of fonts: medium
TextComposer: Latin
Display: 1
Limits of the display: top = 0, left = 0, low = 1080, right = 1920
OpenGL drawing: enabled.
OpenGL allows old GPU: not detected.
OpenGL drawing mode: basic
OpenGL allows Normal Mode: true.
OpenGL allows Advanced Mode: true.
AIFCoreInitialized = 1
AIFOGLInitialized = 1
OGLContextCreated = 1
NumGLGPUs = 1
NumCLGPUs = 1
glgpu [0]. GLVersion = "3.0".
glgpu [0]. GLMemoryMB = 1024
glgpu [0]. GLName = "Intel(r) HD 4600 graphics card"
glgpu [0]. GLVendor = "Intel."
glgpu [0]. GLVendorID = 32902
glgpu [0]. GLDriverVersion = "10.18.14.4156".
glgpu [0]. GLRectTextureSize = 16384
glgpu [0]. GLRenderer = "Intel(r) HD 4600 graphics card"
glgpu [0]. GLRendererID = 1042
glgpu [0]. HasGLNPOTSupport = 1
glgpu [0]. GLDriver = "igdumdim32.dll, igd10iumd32.dll, igd10iumd32.dll.
glgpu [0]. GLDriverDate = "20150303000000.000000 - 000.
glgpu [0]. CanCompileProgramGLSL = 1
glgpu [0]. GLFrameBufferOK = 1
glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = ' 1.30 - Build 10.18.14.4156.
glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1447]
glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]
glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32]
glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32]
glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]
glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [4096]
glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1
glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 0
clgpu [0]. CLPlatformVersion = "1.2".
clgpu [0]. CLDeviceVersion = "1.2".
clgpu [0]. CLMemoryMB = 1165
clgpu [0]. CLName = "Intel(r) HD 4600 graphics card"
clgpu [0]. CLVendor = "Intel(r) Corporation"
clgpu [0]. CLVendorID = 32902
clgpu [0]. CLDriverVersion = "10.18.14.4156".
clgpu [0]. CUDASupported = 0
clgpu [0]. CLBandwidth = 0
clgpu [0]. CLCompute = 0
Type of license: subscription
Serial number: 91190014337803997318
The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32 bit).
Temporary file path: C:\Users\DanielH\AppData\Local\Temp\
Zero Photoshop has async I/O active
Scratch the volumes:
931.4 G, 881,2 G free starter
Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32-bit) \Required\Plug-ins\
Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32-bit) \Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library
ACE.dll CEA-2014/08/12-23: 42:09 79,557478 79.557478
adbeape.dll Adobe EPA 2013/02/04-09: 52:32 0.1160850 0,1160850
AdbePM.dll PatchMatch 2014/09/07-21: 07: 38 79,558079 79.558079
AdobeLinguistic.dll Adobe linguistic Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15: 13: 12 79,512424 79.512424
Adobe AdobePIP.dll 7.2.1.3399 product improvement program
AdobeXMP.dll Adobe XMP Core 2014/08/20 / 09: 53:02 79,156797 79.156797
AdobeXMPFiles.dll Adobe XMP files 2014/08/20 / 09: 53:02 79,156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20 / 09: 53:02 79,156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23: 42:09 79,557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
Amtlib.dll AMTLib 8.0.0.122212002 BuildVersion: 8.0; Brand: Wednesday, July 30, 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23: 42:09 79,557478 79.557478
Axe8sharedexpat.dll AXE8SharedExpat 2013/12/20-21: 40:29 79,551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21: 40:29 79,551013 79.551013
Bib.dll BIB 2014/08/12-23: 42:09 79,557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23: 42:09 79,557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
CG.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
Adobe CIT.dll CIT 2.2.6.32411 2.2.6.32411
Adobe CITThreading.dll CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23: 42:09 79,557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
Dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23: 58:55 79,551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15: 59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15: 59:15 Build gtlib_4.0.19090
igestep30.dll IGES 9.3.0.113 drive
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00: 28:27 79,254012 79.254012
libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)
libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS-2014/08/18-23: 43,19 79,557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Adobe Photoshop CC 2014 15.2.2 Photoshop.dll
Adobe Photoshop CC 2014 15.2.2 plugin.dll
PlugPlugExternalObject.dll Adobe CEP PlugPlugExternalObject Dll Standard (32-bit) 5.0.0
PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (32-bit) 5.2.0.54
Adobe Photoshop CC 2014 15.2.2 PSArt.dll
Adobe Photoshop CC 2014 15.2.2 PSViews.dll
SCCore.dll ScCore 2014/01/21-23: 58:55 79,551519 79.551519
ScriptUIFlex.dll ScriptUIFlex-2014/01/20-22: 42:05 79,550992 79.550992
svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
TBB.dll Intel Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll kernel 9.3.0.113
Geom TFKGEOM.dll kernel 9.3.0.113
Adobe TFUGEOM.dll, UGeom © 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Control Library 5.0.0.82 Application
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Friday, March 7, 2014 15:33:10 build 0.20204 0,20204
U3D writer 9.3.0.113 wu3d.dll
Required plugins:
3D Studio 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Accented edges 15.2.2
Adaptive wide-angle 15.2.2
Angular Strokes 15.2.2
15.2.2 average (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 bas-relief
15.2.2 BMP
Camera Raw 8.8
Camera Raw Filter 8.8
Chalk and charcoal 15.2.2
15.2.2 charcoal
15.2.2 chrome
15.2.2 Cineon (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 the clouds (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 COLLADA (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Halftone color 15.2.2
15.2.2 colour pencil
CompuServe GIF 15.2.2
Conté 15.2.2 pencil
15.2.2 crack
Crop and straighten Photos 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Crop and straighten Photos 15.2.2 filter
Hatch: 15.2.2
15.2.2 to crystallize
15.2.2 cutting
15.2.2 Dark strokes
15.2.2 deinterlacing
15.2.2 DICOM
Difference clouds 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 glow
Move 15.2.2
15.2.2 dry brush
Eazel acquire 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Embed watermark 4.0
15.2.2 entropy (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
NO export VERSION color tables
Extrude 15.2.2
FastCore 15.2.2 routines (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 the fibers
Film Grain 15.2.2
Filters 15.2.2 Gallery
Flash 3D 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 fresco
15.2.2 glass
15.2.2 Scarlet contours
Google Earth 4 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 grain
15.2.2 graphic pen
Halftone Pattern 15.2.2
15.2.2 HDRMergeUI
HSB/HSL 15.2.2
IFF Format 15.2.2
15.2.2 IGES (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 ink outlines
JPEG 2000 15.2.2
Flattening coefficient 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 goal blur
15.2.2 goal correction
Lens Flare 15.2.2
Liquefy 15.2.2
15.2.2 Matlab operation (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
maximum 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Mean 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Measure Core 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Median 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 Mezzotint
Minimum 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
MMXCore Routines 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 mosaic tiles
Multiprocessor support 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 Neon
15.2.2 paper
15.2.2 colour NTSC (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Ocean Ripple 15.2.2
15.2.2 OpenEXR
Paint Daubs 15.2.2
15.2.2 palette knife
15.2.2 patchwork
Paths to Illustrator 15.2.2
15.2.2 PCX (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 photocopying
15.2.2 Photoshop 3D engine (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Photoshop Touch 14.0
Photo filter package 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Pinch 15.2.2
Pixar 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 plaster
15.2.2 plastic wrap
15.2.2 FOLDS (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 PNG
15.2.2 pointillism
15.2.2 polar coordinates
Portable Bit map 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Poster edges 15.2.2
People's Republic of CHINA 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 radial blur
15.2.2 radiance (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 rank (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Read watermark 4.0
Color research grid NO VERSION rendering
15.2.2 Crosslinking
15.2.2 the ripple
Rough Pastels 15.2.2
Save for Web 15.2.2
15.2.2 ScriptingSupport
Shake Reduction 15.2.2
15.2.2 shear
15.2.2 asymmetry (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Smart Blur 15.2.2
Smudge Stick 15.2.2
Solarize 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 splash
Spherize 15.2.2
15.2.2 sponge
15.2.2 sprayed strokes
15.2.2 stained glass
15.2.2 stamp
15.2.2 standard deviation (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
STL 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 Sumi-e
15.2.2 summation (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 Targa
15.2.2 texture veneer
15.2.2 tiles
15.2.2 torn edges
15.2.2 twirl watch
U3D 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 draft
15.2.2 vanishing point
15.2.2 the variance (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Virtual Reality Modeling Language. VRML 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Water paper 15.2.2
15.2.2 watercolor
15.2.2 wave
Wavefront | 15.2.2 OBJ (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
WIA support 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
15.2.2 wind
Wireless Bitmap 15.2.2 (2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532)
Zig - zag 15.2.2
Plug-ins option and the third: NONE
Plug-ins that could not load: NONE
Flash: NO
Install TWAIN devices: NONE
Operating system: Windows 7 32 bit
Processor speed: 3591 MHz
Built-in memory: 3511 MB
Free memory: 2180 MB
Memory available to Photoshop: 1592 MB
No offense, but for any PS works by today's standards, what you have here is simply not enough. The registration process fails probably simply run out of memory during the generation of the preview or other operation. Unless you add more RAM and get the 64 bit, your problems probably will not disappear, and I would like to same thing working with ACAD on such a system is not particularly nice, considering the amount of RAM it uses to load its libraries and a few other things...
Mylenium
-
When you save MHTML files, I get the icon of IE instead of Mozilla.
When using Mozilla/Firefox, I can't save new files MHTML with Firefox icon icon - the seems to be the same as "text icon. Also, I can't use the "open with" to change the existing icons IE MHTML files to the Firefox icon. Some icons of FF are correct, such as the start icon FF on desktop and on the menu of the button 'start '. All other HTML files on the desktop and in folders still show the original icons of IE. By deep Googling, I find suggestions to remove "defaulticon" and other changes in the registry. None of them seem to work and make the problem worse.
Using XP Pro, SP3.You have set as default Firefox browser?
-
When you rename a file highlights only the name and not the name extension.
Hi all
When I rename a file, it highlights only the name part of the file name and not the name extension. I need the name of entire file highlighted when I rename a file. Where is the setting to change this?
Thank you
Pete
Hi Pete,.
Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.However, I have a workaround. I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse). So I click on F2, then if I need to select both file extension, I can make one of these:- Press Ctrl-A
or - Press SHIFT - end
I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy). Hope this helps at least a little. - Press Ctrl-A
-
When you transfer overdrive mp3 audiobook, receive the OxCOOD2772 error code
When att. to transfer overdrive mp3 audiobook, "has a problem OCC in obt. OxCOOD2772 of devices CERT error code. ».
This error message may indicate that your device cannot access the DRM protected WMA files. In order to play the WMA titles, your mobile device must be able to play Digital Rights Management (DRM) WMA files - not only WMA protected files.
-
I have a problem when you try to receive data using the socket connection.
Hello
I created a socket connection between a pc (sever, win32) and a blackberry (client) and I have only two questions:
-When I send a string to the sever I get the unexpected result, I doubt if it's a problem of encoding between platforms.
-When I try to receive data, (an array of char as a string object), the customer demand freeze (drawing and management of events, so basically the main UI thread), even if I did all the stuff of connection in a separate thread, until I have shut down the server and also no data is received.
I left the codes below and would assess any response from you.
C++, win32 console application:
SOCKET _Socket;
int _tmain (int argc, _TCHAR * argv)
{
If (start_sever (_socket)) {}
char r_msg [26];
recv (_socket, r_msg, 26, 0);
std::cout< "receive="" :="" "="">< r_msg=""><>
char * s_msg customer = 'welcome ';
Send (_socket, szMessage, strlen (S_MSG), 0);
std::cout< "send="" :="" "="">< s_msg=""><>
Sleep (500);
Shutdown (_socket, SD_SEND);
closesocket (_socket);
WSACleanup();
} else {}
std::cout< "cannot="" initialize="">< std::endl="">
}
System ("pause");
return 0;
}
BOOL start_sever (socket) {}
WSADATA WsaDat;
If (WSAStartup (MAKEWORD (2.2) & WsaDat)! = 0)
{
std::cout<"WSA initialization="">"WSA>
WSACleanup();
System ("pause");
Returns false;
}
Socket = socket (AF_INET, SOCK_STREAM, IPPROTO_TCP);
if(Socket==INVALID_SOCKET)
{
std::cout<"Socket creation="">"Socket>
WSACleanup();
System ("pause");
Returns false;
}
SOCKADDR_IN serverInf;
serverInf.sin_family = AF_INET;
serverInf.sin_addr.s_addr = INADDR_ANY;
serverInf.sin_port = htons (8888);
If (bind (Socket,(sockaddr*) (& serverInf), sizeof (serverInf)) == SOCKET_ERROR)
{
std::cout<"Unable to="" bind="">"Unable>
WSACleanup();
System ("pause");
Returns false;
}
Listen(Socket,1);
SOCKET TempSock = SOCKET_ERROR;
std::cout< "build="">
while(TempSock==SOCKET_ERROR)
{
std::cout<"Waiting for="" incoming="">"Waiting>
TempSock = accept (Socket, NULL, NULL);
}
Socket = TempSock;
std::cout<"Client>"Client>
Returns true;
}
Platform of Java for blackberry:
public class Bush extends form {}
-my current ipv4 address is set by default to avoid reset at each test
TextField ip_text_field = new TextField ("IP address:", "192.168.65.1");
-the server is waiting for any connection to this port ("8888")
TextField port_text_field = new TextField ("Port:", "8888");
ButtonField go_button_field = new ButtonField ("Connect", Field.FIELD_HCENTER) {}
protected Boolean invokeAction (int action) {}
UiApplication.getUiApplication () .invokeLater (new Runnable() {}
public void run() {}
try {
open_connection();
}catch (System.Exception e) {}
e.printStackTrace ();
Dialog.Alert (e.getMessage ());
}
}
});
return true;
}
};
public Socket() {}
Super ();
setTitle ("[taking sample]");
Add (ip_text_field); ip_text_field.setMargin (20, 0, 0, 0);
Add (port_text_field); port_text_field.setMargin (30, 0, 0, 0);
Add (go_button_field); go_button_field.setMargin (30, 0, 0, 0);
}
public Boolean onClose() {}
this. close();
return true;
}
_Con StreamConnection;
DataInputStream _in;
OutputStreamWriter _out;
public Sub open_connection() throws Exception {}
_CON = (StreamConnection) Connector.open ("socket: / /" + ip_text_field.getText () + ":" + port_text_field.getText () +)
» ; deviceside = true; interface = wifi");
this.add (new TextField ("", "connected successfully to Server"));
_in = _con.openDataInputStream ();
_out = new OutputStreamWriter (_con.openDataOutputStream ());
String msg = "Welcome to customer \r\n";
_out. Write (MSG);
String r_msg = _in.readUTF ();
this.add (new TextField ("read from sever:", r_msg));
_out. Flush();
_in. Close();
_out. Close();
_CON. Close();
this.add (new TextField ("", "data has been changed"));
}
}
Thanks for your help.
You treat on the thread of events.
You have the following code:
UiApplication.getUiApplication () .invokeLater (new Runnable() {}
public void run() {}
try {
open_connection();
.....
Now invokeLater essentially tells the operating system that the associated executable must be run on the event Thread. You need start a separate Thread. Extend this Thread, add your code in the run() method, and then start the Thread with start(). (not run()). Then you must run the networking of processing on a separate Thread.
This will cause you problems updating the user interface. Take a look at this help:
Printing, this means that invokelater a separate Thread is a common misconception. I recommend you to look at this:
http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865
In addition, I recommend that you take a look at the socketDemo which must be included as a sample-, otherwise you can find it on github:
-
Lag when you draw a square by using the property plotimages.back on XY graph
Hello
I'm developing a simple program where you enter 2 vertical sliders on a XY chart by selecting coordinates X and then it should highlight in yellow the area between the two mentioned sliders.
The issue I'm having, is that even if the program is inspired by the square on the graph, there is a shift, which I can't get rid. I checked the input coordinates to draw the square and they seem correct, however, the gap is still there...
Please find attached my program, thank you very much for your help!
Well, I found the reason. To eliminate the offset, you must get the graph XY plot area limits and subtract 'top' and 'left' your coordinate of the cursor values
-
I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.
original title: problems with the router.I have no solution for you. It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.
In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers. This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.
Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers. If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you. See the list here: http://www.dd-wrt.com/site/support/router-database
-
WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?
It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.
http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/
-
The files and settings to remove the old computer when you make a file and the transfer settings Wizard?
Hi KaraDay,
When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.
How to use the "files and Settings Transfer Wizard" in Windows XP
-
Original title: can see more videos on the internet is
Since last week, my computer won't play any video on the internet. When you click on the arrow of reading, it becomes just a black screen. I can always download movies from netflix. I uninstalled adobe Flash Player and reinstalled and still does not work. Someone at - it answers? Thank you!
Hello
Yes, it will work.However, when you try to open something on the internet, it opens with the default browser.Method 1: You can make the default Internet Explorer browser and then perform the troubleshooting steps.Reference:Change the web browser by default
http://Windows.Microsoft.com/en-GB/Windows-Vista/change-your-default-Web-browserMethod 2: Since then, it was working fine before, you can restore the computer to a date when it was working fine.
Reference:System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsIf online videos play fine in Internet Explorer and cause problems only when you play in Mozilla Firefox, you can ask your question in the Forums in Support of Firefox as well:Here is the link: http://support.mozilla.org/en-US/questions/new -
Cannot access internet when you configure with internet connection sharing.
INTERNET HELP?
I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7Hello
1. While sharing was the Internet works fine before?
2 did you change on your computers before this problem?I suggest you follow these methods and check.
Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
Set up a shared Internet connection using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
If ICS is not configured correctly, then you must post back the result by running the following command
To do this:
a. click the Start button.
b. type cmd in the search box.
(c) in the command prompt, you must type ' ipconfig/all' and check the result.Take a screenshot of the command prompt and post.
To take a screenshot, you can follow this link below.
Use capture tool to capture screenshots
http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shotsMethod 2: Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03I hope this helps.
Thank you.
Maybe you are looking for
-
Older Version version official http://www.mozilla.com/en-US/firefox/all-older.html Third-party Copies of older Versions http://www oldversion com use at your own risk.
-
iPhone 6 s so that cable does not charge the iphone 128G 6 +.
my iphone 6s longer cable does not charge my phone. an error comes up saying my cable or accessory is not certified. I rebooted several times but still the same. What should I do?
-
Satellite L650 - need of plastic covers
I need a plastic housing, front and rear motherboard Toshiba Satellite L650 or covered hard drive model and plastic keyboard bezel Trim
-
I tried to install this freware\shareware and this is the error I get. Windows XP Professional SP3 IE8, 1.8 Ghz 1.18 MB. Any ideas?
-
I need to set up my tom tom 950 live sat nav on my computer
I usually plug just in my unit of sat nav to charge my battery it doesn't work anymore since I got a new hard drive installed on my computer can you suggest avial options for me