WRT160N QoS

Similar Questions

• QoS distressed WRT160N

  I got this router WRT160N 2 weeks ago and it worked fine. I have 4 computers connected wirelessly and also a voice of Vonage device. During times of heavy computers download the phone quality would sometimes fade. Therefore, I decided to use QoS and set QoS for the device of loud and the medium and normal computers.

  After those changes my phone through the voice device hardly worked, cut in and out, and also computers had difficulty maintaining an internet connection.

  Then I disabled QoS again, the phone works again, but the internet connection for computers really is now unstable and unable to maintain a continuous information.

  Is it possible to reflash the router back to factory settings — just disable QoS doesn't seem to work.

  Connect to www.linksys.com/downloads and try to update the firmware of the router.

  Follow these steps to upgrade the firmware of the device:-open
  a page of Internet Explorer browser. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin
  Click on the tab - then 'Administration' on
  the 'Firmware Upgrade' void tab-here, click on 'Browse' to select the
  compressed extract/No .bin or .img file and click on "Upgrade"-waiting for seconds... ".
  It shows that "Upgrade successful" after
  update firmware, click on "Reboot" and you will be returned back
  on the same page OR it will say 'cannot display the Page.
  Reset the router for a few seconds...
  Reconfigure...

• Cannot connect by Satellite A305 Linksys WRT160N wireless

  I have a Satellite A305-S6839 with Windows Vista Edition Home Premium that I tried to connect wireless to a Linksys Wireless - N WRT160N router but I am unable to get the service.
  I can configure the router and it transmits properly, but for some reason that I can't connect to it. I tried to reboot several times that the manufacturer suggested unplugging the cables, but that did not work. I suspect that there are drivers I need to download for this operation.

  Someone give some advice?

  First, visit the Toshiba support site we and install the latest BIOS and Wifi Driver.

  Second, try to change the Wifi settings-Wifi card-> properties > Device Manager. Increase power output, select "802. 11 g-only", turn off energy-saving.

• R8500: QOS is terrible on this router for $400

  So before you get this router I was using a $20 off of eBay refurbished Linksys router E6500 running DD WRT (Yes, you can run it on this router if you know where to find the firmware for this). In any case, the flow was not the greatest, but I never had problems.

  I have a ReadyNAS RN516 to my office and the backup on my Mac using the time machine office nas. I also have the Charter which gives single 4mbps upload (it's slow, but once he finished the initial and subsequent backup backups are fine). In real life, it's more like 4.75mbps. I have QOS value 3.75 to ensure that my modem is not bufferbloat and kill my connection.

  My problem is however that often my devices slow to a crawl (if more than 5 Ghz wireless or wired) whenever I am downloading. On my other router I just put 4 Mbps as the download limit and all devices than 4mbps equally, and I never had no problem with slowdowns or high pings and lag. No matter what I put the download speed at... He accuses just out for no apparent reason on this router.

  If someone can tell me why free DD WRT software works better than the software on a router for $400? Just curious?

  The new firmware seems to have helped. I changed a few things as well, and it seems to work very well.

  Regarding the comment of routers figure 3 and 4 routers in figure, there must be an improvement on the 2 figure routers and routers multi-3, otherwise what's the point?

  I'm trying the test of the future a little, that's why I chose this router. It doesn't matter if I take it right back and stick with my $ 20 DDWRT router. I do not have the latest and greatest tech (2012 macbook air and several iPhone 6 more ' and a room above the router and I can not even through any speedtests 60mbps (run through the gigabit mac that is wired and I move 65mbps each time.)

  I don't have a fast enough home nas box, but I'd be curious to see wireless local area network speeds. I wonder if I can break even 100 Mbps with this thing...

• N450 CG3000DV2 access to WMM and thus QoS

  I try so divy upward to the bandwidth of the apartment because my roommate likes to broadcast all the day and night.

  Anywho, I have the router wireless modem n450 and comcast as a provider. I connect and where the QoS configuration tab should be, is nothing. I'm thinking maybe I don't have WMM enabled, but that the tab isn't there either... firmware is fine and I tried different browsers and the whole nine yards. There is simply nothing. I don't know what I have to do yet? It has been more than 90 days, so I won't have to pay to call assistance. Thank you everyone!

  EDIT: I checked the manual and it has's it to be able to do

  Hello everyone

  WMM settings are in the advanced settings of Wireless - Advanced Configuration - WMM. Complete QoS is not supported on cable products. We have the manual updated to show this.

  DarrenM

• Why QOS is assign a low priority to speakers/Media Players?

  I have AirPlay speakers, set up around the House and bizzarly NightHawk is assign the latter with a LOW QOS parameter?

  The speakers cut despite an 87% Signal strength to 54 Mbps one another with a 99% to 54Mbs Signal strength two to 2.4 Ghz

  The 5 GHz range is much better - The Lounge speaker (which is the line of sight of the NightHawk 20 ft across the room reports 100% signal strength to 150Mbps.

  And still stutter stall throughout the House.

  These features worked better on the old wifi but have been the subject of wifi sometimes abandonment of all devices where the 'upgrade '.

  I had put the speakers at a higher priority if they came in the attached devices, which, despite the connection to the common Nighthawk and streaming though stuttering audo, are attached to the Nighthawk.

  It of just that I have a bad Nighthawk or are they just as bad?

  Fixed it

  everything works fine now

  returned the NetGear to Amazon bought an Asus

• QOS disabled button

  Upstream and downstream buttons are disabled in Netgear genius, this function is not available.

  My understanding is that it has QOS.

  Thank you.

  

  If used in a different mode that the router THAT QOS will be disabled

• QOS parameters were not set to R6400

  I'll put up my R6400 I just bought and all will lose but it does not appear that the upstream QOS parameter I want to phone IP is to stay together. I go through the Advanced menu and click on the button in front of IP phone, and then click turn on, but when I go back to look at the settings of the IP phone button is again disabled. What should I do to get the rotor to accept QOS for IP phone?

  Hi @MSRadell,

  Once you have checked the box to enable QoS upstream all QoS rules will be applied. The light in the radio button will be highlighted only if you select to change or remove a given rule.

  Kind regards

  Dexter

  The community team

• How to set QoS priority by device and service on C7000 Modem/Router?

  I would like to set the priority to my VOIP (OOMA) connected to the Ethernet port. Don't see anyway in the Engineering menu to access QOS, even if the item appears on other models of Nighthawk...

  Appreciate any advice.

  Hello ceeteebee

  QoS is not apart of the C7000 if you want this feature, you do not buy a cable modem and use one of the routers as the R7000 Nighthawk.

  DarrenM

• HELP Please! AC750 D6000 couldn't change the QoS settings

  Hello

  Could someone teach me how to enable QoS settings in Netgear genius? Currently, it could not be changed, the checkbox is grayed out (just like the inserted picture)

  Thank you!!!

  

  Hello rxishere

  You use the wireless so then I would try to change the wireless channel to see if you get better speeds. If this isn't the case, you can contact your ISP to see if you have found the right speed.

  DarrenM

• Is their extreme Quality of Service (QoS) in apple option?

  Hello world

  Y at - it an option to enable QoS in extreme apple so that we give a VoIP?

  Thanks in advnace.

  Sorry, but no. Apple routers don't support QoS.

• Application of Router WRT160N problem loading with LELA

  Bought router WRT160N downloaded software. everything works fine with the router. but when I tried to open LELA shortcut on my desktop, I have nothing. LELA will open in the taskbar. I went to the executable files and tried to open it y fron and nothing. I went to the Vista Task Manager and looked at my running applications, and it shows an easylink icon is labled ALERT POPUP that is running. and also the Linksys Easylink Advisor running. When I finish the task for the alert popup. I can now open with the shortcut.

  hope I have not confused.

  There is something called ALERT POPUP running in background. preventing me from opening my shortcut LELA.

  Try this McKieus

  I had exactly the same problems that you described with technical support. I found this link in a post by Basiltoo on 12/15/2008. It worked for me. Previously, I had the x 86 machine error when loading the software upgrade. I have a 64 bit system. There are still a few problems with some of the options, but most of the time it works.  The link is http://update.linksys.com/autoupdate/

  I also uninstalled LELA however add remove programs and restarted before I installed the new version. On the new version, he has a place where it asks if you have a 64 bit system. If you choose the download you receive will be correct and you should not get the 'x 86' mistake.'

  He seems also to stop correctly in this new version.

  Good luck.

  It worked for me.

  BRICS

• WRT1900ACS v2 QoS download Bufferbloat and levels of media

  Hi, I just got this router out of the box today.

  Wow, the user interface is a bit tight isn't?  I just a DIR - 645, and thought the Linksys router would be nice because of the having triple the speed of the processor...

  ... anyway, unless I missed something, is there any way to enable QoS on the side of bufferbloat combat download when downloading?

  ... what?

  You have two sections, normal and high priority... and that's all?  None of the options as a choice?  It's been dumbed down for everyone?

  I wanted to test streaming to jerk with QoS on for upload combat tests of terrible bufferbloat I get on speedtests.  We are talking about 400 to 600 ms here.  I usually get up to 5.7 mbit during the download and 65 Mbps on download (Charter).

  Anyone can help or clarify?

  I need to replace the firmware dd - wrt?  etc.

  I also noticed the router is not a way to find out what my DNS server addresses are otherwise set manually?

  Well I guess it depends on how comfortable you are in Linux. DD - WRT is the easiest (according to me), then you have OpenWRT that builds that include LuCI web interface but development was slow on this subject, many developers have left in LEDE which also built with LuCI included as well.

  Here are some links for you to check.
  https://www.DD-WRT.com/demo/
  A lot of Info for DD - WRT is outdated online, best bet is to browse or search their forums.
  Also do not use the version listed on their database, it is old, get them here ftp://ftp.dd-wrt.com/betas/2016/
  Or you can try build http://www.desipro.de/ddwrt/K3-AC-MVEBU/ Kong

  https://www.lede-project.org
  https://OpenWrt.org

• Can I use my WRT160N V1 as a signal booster/access point?

  I have a router Linksys WRT160N I want to use it as an access point for the devices in my basement. The main modem is a century link PK5001A. How could I go to set it up?

  Yes cascade would be wired AP.

  If you mean you want to change the WRT in a wireless Repeater that is different. In this case, you are lucky DD - WRT is compatible with V1.

  http://www.DD-WRT.com/site/support/router-database

  Change the firmware for this 3rd part and configure the WRT as wireless Repeater. It is not easy to config but there is a lot of documentation for DD - WRT.

• Setup of QoS for Whatsapp and VOIP application

  Hello guys,.

  I have a modem WAG320N. I have wasnted to configure the QoS priority for 2 applications 'Whatsapp' and a VOIP application that allows me to call from a computer to a mobile phone. I use torrent applications and that they take all the bandwidth. That's why I was looking for to configure QoS for these two applications.

   

  I went to the page of QoS and they are wondering about the details of the application as the range of ports etc.. I don't know what value to be filled. I posted a screenshot below of his request. Can someone help me fill out these details for both applications.

  Thanks in advance

  Image: http://i40.tinypic.com/2qi02z5.jpg

  You can add essentially Viber on QoS. Under the games and Applications, QoS, click on enable priority access Internet. On the category, find the Applications > add a new Application. You can enter the name of the Application. You can now add the port numbers. And since it is a specific port and no beach, do you this way;

  5242 - 5242 TCP (for Protocol)
  4244 4244 TCP
  5243 5243 UDP
  9785 9785 UDP

  I hope this helps.