WRT160N-Wired con. 26MPS router, Wireless is 2MPS with Wireless-N. Why drop in speed?

Similar Questions

• Wireless router wired to the router wireless help?

  I have a linksys wireless router and have run an ethernet cable to my desktop which is outside my house. I have the ethernet running into a hub for computer cable then switch (hub). I want to add wireless access in the office. Can I add another wireless router to the desktop and plug it into the power switch? How can I do this?

  1. Follow the instructions for 'LAN to LAN' Cascading in the link below:

  In waterfall or connect a Linksys router to another router

  Thing to keep in mind when cascading a router:

  1. Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
  2. Make sure that the DHCP service is disabled on the secondary router
  3. Make sure that nothing is ever connected to the internet port of the secondary router
  4. Differentiate the wireless SSID by location (Ex: downstairs) and the channel

• WRT160N router wireless and speed Test

  Hello

  I was wondering if someone could help me.  I've just changed in the old Netgear G router to a router cisco Linksys N.  When I'm connected wireless sitting next to the modem and the router of my speed test shows more than 20 on the download, but when I go up a floor in the House it drops at least 2 on the download.  I thought that this router was supposed to expand the range and allow more devices to connect wireless taken less bandwidth.  Is there something I can do to improve the speed in addition to spending my router wireless on the main floor where is most of the navigation on the internet?

  Hahahaha WOW no no not the router to the modem worked!  I went from 1.5 on 15 on downloading downloading when I had about one foot apart from each other!  Awesome.  I have not been very high over the years!

• Bought WRT160N v1 set-able, but wireless internet does not

  So I bought the WRT160N v1 so that I can set up my new internet. And I connected a laptop via ethernet and two other wireless computers (well, only in fact, the other ocmputer does not connect for some reason, I have it set to the way the router tells me and all I get is not connected), ethernet internet connection works fine, but the internet will not work on the wireless.

  I don't know a lot about routers, so I need some desperate help.

  I think you need to change some settings of your router wireless, to make your computers wireless mode wireless via the router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Unable to connect to my router wireless - Satellite A200

  Hello

  Can someone help me to connect my laptop to my wireless router? He used to work, but note accept the security code that my other pc is running without problems. The laptop connects to other unsecured sites and is ok hard wired to the router. I tried re enstating the router on the laptop but not joy.

  Anyone got any ideas I can try?

  Thank you

  Hello

  Are you sure you used the security code? Maybe do you a misspelling, so I would try to check it again.

  In addition if you use DHCP on your router, your laptop get an IP address?

  By the way: Toshiba laptop you have and you did update the driver WLAN?

• How to reconnect using wired through my router?

  Network wireless adapter NIC Ethernet network device

  How to reconnect using wired through my router?

  Hello

  ·        Are you facing any problem to reconnect to the router?

  ·        What operating system is installed on your computer?

  ·        What exactly is the problem you are having?

  Method 1: Follow the step of the link troubleshooting problem with network connection:

  Wired and in the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:  If you use Windows 7, then follow the steps for the link to how to configure a router:

  Configure a router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Method 3: To troubleshoot the problem network connection follow the link:

  http://support.Microsoft.com/kb/313242

• Remove or replace the name of the network (Vista, wired to the router)

  I have 4 computers on my network home (a new laptop and Windows 7 desktop computer and an older laptop and desktop Vista, which are replaced - laptops are wireless).  I had a LOT of problem with printer sharing, especially after a reboot printer goes offline, and I can't find any way to get them back another remove printers and reinstalling (disappointment, disappointment, disappointment) online.  And then I started having problems with one of the Vista (cables to the router) computers access the computer Windows 7 new, also wired to the router.

  Then I will begin first with the last problem.  Trying to get the old wired Office Access/recognize the new desktop windows 7 Wired, I ended up resetting my fairly new Linksys router e2500 to its factory setting - and in the process gained a new network name.  I finally understood how to get the laptops wireless to recognize the new network (should be easy, but it wasn't), but the old wired Vista insists on the use of the former name of network, one that appears in the network and sharing Center implementation.  The other funny thing is that even though she seems to be using the former name of network, I put on Jack autour with her so I don't have Internet access on my old Vista computer.

  I guess that because it is trendy, it seems not to worry about the network name, but it's bothering me because it's not fair.  However, I can't find any way to delete the old name of network.  I spent the day on that and am still confused.  Baffled because it is working and baffled because I can change the name.  I also get a lot of mistakes "Windows cannot access \\myWindows7computername" when I double click on the name displayed in the network folder of Windows Explorer (probably more serious problem).  In any case, I want to address what should be first the problem of easire.

  I discovered enabled network, public folder sharing, which transforms file on the computer discovery and Vista network, sharing the printer and sharing active files (but only on the printer and all the other things of file not checked), and sharing files public computer to Windows 7 (the one with the printers connected to it) - and passwords disabled on both (all computers).

  So my first question is how to make the network name on the Vista desktop wired old deleted/changed/replaced for the new name of the current network.  Why it does not insist in using the former name of network that no longer exists.

  Ron in round rock

  Sorry about that, but I got my answer from another forum, a Linksys Forum - and I will talk about a few things in case other people have this problem/question.

  To remove the network name that appears on the Network Center and sharing, click on the link to customize to the right of the network type - and on the next screen, click on merge or delete network locations, you will / should be able to remove (don't know what fusion done or means) the network with the wrong name, EXCEPT that you can't remove it If it is being used (which is / was the problem I had).  When I unplugged the cable between the computer and the router, I was able to remove the network location (the one with the old name of network), I tried to get rid of.

  Now for the confession.  All this has nothing to do with the name of the network - and most of the things in my original post is just smoke also.  I was going down the wrong path.  It turns out that with computers connected to a router, there is only one network involved and you can call it anything you like and it will work.  There is no selection of a network involved as in the case of a wireless network.

  Network with wired computers name is determined lby network name "you enter" on the screen to customize network settings, the screen you get when you click Customize on the screen of the Network Center and sharing - and you can type in anything you want here.  I'd so go through all this.  I simply had to re - enter the network name on the screen to customize network settings, that is simply a name that you can use for your own reference.

  Ron in round rock

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  It is a Canon PIXMA printer - new.  Everything seems to be downloading fine until it gets to the stage where the MP drivers are downloaded.  At this point, an error message is displayed: "MP Drivers could not be installed" I tried to install with the method of USB cable but no luck there.  I'm at my wits end at this point.  All the advice - please help.  Thank you.

  Hello.

  Try to temporarily disable all firewall or anti-spyware programs on the system when running the installation.  It may be possible that another program is preventing the MP Drivers Installer.

  If you continue to have difficulties, find more help contact us.

• my router wireless guard Plug and go offline.unplug and it works again

  my router wireless guard Plug and go offline.unplug and it works again

  Contact the technical support of the manufacturer of the router.

• How counfigur tp-link router wireless? I have the Wireless ADSL router. I want to add 1 wireless router in this system. What can I do? Please, I beg you. suggest me. ___thank

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

• Modem router Wireless N upgrade?

  I have a Linksys BEFCMU10 ver.2 modem which has served us for about 8 years.  I've recently updated our wireless n router, but have seen no improvement in the coverage area or speed.  The seller in Microcenter told me that my current modem was fine, but I wonder if I need to improve my modem to take advantage of the N WiFi feature.  Another thing, I remember when the tech our cable connected to the modem, it added a 10/100 switch.  Can it be purchased?  The research I did on the forums, it seems that I need a compatible 10/100/1000 switch for the gigabit speed.

  I apologize for the basic questions, but I tell myself that if I want to learn I have well start somewhere

  Thank you!

  It is not question of cause I don't think you have 100Mpbs subscription from your ISP. This modem is good for home use. You will get your your router Wireless N speed and that's only within your local network.

• Linksys makes a Combo of Modem/Router Wireless N cable

  Does Linksys router wireless n gateway, a combination router and cable modem?

  Currently I have the unit combined for wireless g, but upgrade to wireless-n.

  Thank you!

  I think at the moment that doesn't sell Linksys 802.11n gateways.

  I generally recommend not getting the combined devices, but better to get two separate devices, a simple modem and a wireless router.

  1. you have a far greater choice of products for the router, and they are usually less expensive.

  2. in the event of the death of the router you can still have internet via the modem directly. If the combined unit dies, you are in offline mode.

  3. less functions in a more simple design makes the device and averages more stable and more reliable devices.

  4. you can replace a device at any point. For example, if you pass the ADSL or FTTH cable you can simple replace the modem. You may need to change the configuration on the router but other internet connection so that you can keep the router. Similarly, if two years from now, you want to get the router new generation wireless you can continue to use your modem (if it is still suitable for your internet speed)

  Some thinking...

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.