WRT160NL Firmware Rollback

Similar Questions

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• WRT160NL Usb storage not recognized after update firmware

  Hello.
  I use a power running alternative disc into my router for a long time, until I've found the new firmware (Ver.1.0.04 Build 2), but after the upgrade of the storage was no longer working. (I don't remember the firmware version he had)

  In the storage, in the page Setup tab, I can see the drive, I can create shares, but these are not present in the windows network. (I use windows 7)

  the disc has been tested using FAT32 and NTFS (232.8 GB)

  you have a solution for this problem? or should I return to the firmware version, he had (that I don't remember)...
  y at - it another version to switch to?

  Thanks for your help...

  Yes! This is the solution!

  Thank you

• WRT160NL Exchange download and speeds.

  Hello world!

  WRT160NL Exchange download and speeds.

  

  Before the router, everything's fine, then it is wireless or Ethernet port is over situation.

  No difference what firmware it is (1.0.02, 1.0.03, DD - WRT...)

  There are many things to take into account for the same problem, I found this link then. You can check this, http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22110

  Also, have you tried to reset and reconfigure the router? If this is not the case, try to do first.

• Size of changing WRT160NL files on data storage

  I WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TO I managed with 2 partitions of 1 TB, one of 700 GB not visible in router. I'm okay with that. The problem is now when I copy my files. I try to create the library of TV series for my Apple TV. Everything works well except the size of the files. When I copy files to PC USB, they are corrupt on networked storage and is not accessible. When I copy a file size 350 MB on storage networking via WIFI works well but is saved with a size of 2.7 Gb. general, I have a lot of problems with this router and I am very disappointed.

  FIX:

  It's NTFS. I upgraded the router with the latest firmware today 1.0.03. Had the same problem. I change HDD on 2 and formatted the drive on FAT32 partitions, and everything is OK at the moment. All 3 TB is available and the files are copied and reproduced very well. The speed of the network also has changed for the better 5 MB/s WiFi before I had 1, 5 Mb per second. Had some problems with one of the point of access after the update of the firmware, but fixed later.

  Usually if you storage is over 2 TB router has a few problems but

  2 partitions, FAT32 and the latest firmware 1.0.03, the problem will be solved.

• Reserved DHCP WRT160NL customers are not appearing in the window of DHCP reservation... Why?

  I have 5 computers connected to my router. 4 are wired and I put in place so that each of the 5 has its own static address. One of these computers is my DVR security camera system to allow monitoring my cameras remotely. It worked very well for years, and now I can't access the DVR remotely. I noticed in the router configuration that DHCP clients are not displayed appear as active, even if the two computers are on. I am running XP Pro on these machines and I can PING each other so I know some communication happens. Also, I can access cameras DVR from my main computer using the internal IP address, I assigned to the DVR, but not if I try to use my current WAN IP address.

  Would appreciate any advice on the resolution of this problem.

  Thank you

  It may have something to do with the firmware of the router. I suggest that you should do. The firmware that you can download from the site Web of Linksys is version 1.0.0.3 build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding the reset button). It is best to re - configure the router from scratch also. Try to power cycle your network as well.

• Problem with WRT160NL

  I bought a WRT160NL a week ago, it worked fine until now.

  I am connected via the net with a PPPoE connection. I set up the router to stay connected all the time to the internet and yesterdy I noticed that my download speed was very low so I have powerd OFF and on again. When he returned to the life he connected himself but the DHCP stoped working. I use windows 7 and in the cone right it says that I'm connected to the netowork but no internet available...

  I zero it to it's the factory settings and reconfigured it back. Now it works again, but in a few days my Torrent speed will come down to MB kb and must get back to factory settings... it's not good ...

  I tried to connect to the net only when internet is necessary, but after a computer is restarted the same problem appears.

  What is the problem with it? Why fall the DHCP?

  Try upgrading/re-Flash the firmware of the router.

  Connect the computer to the router with the Ethernet cable. Download the latest firmware from the site Web of Linksys and save it to your computer.

  Open the router configuration page and go to the tab Administration on Firmware Upgrade tab browse the firmware file that you have already downloaded and update on your router.

  After upgrading the firmware of your router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and then reconfigure.

• Internet high speed falls 85% when it is routed via WRT160NL

  I have a WRT160NL, and it decreases my internet speed of 3700 Kbps up to 550 Kbps when I walk by it.

  My ADSL modem is connected via an ethernet cable to the WRT160NL, then I have an ethernet cable from port the WRT160NL #1 to my desktop. With this connection, I get a download of about 550 kbit/s.

  When I route directly from my ADSL modem to my office (bypassing the WRT160NL) my download speed is 3700 Kbps. I checked all the cables and connections. What is the origin down to 85% of the speed?

  Thank you

  groff5

  When you face the problem on your wired computer, you change the settings of your router... Once you log in to the router configuration page... The installation program you will find the MTU size that will be set to AUTOMATIC if you need to change it to manual and change the size of 1500 in 1365 and click on save settings... Click on the Security tab and disable "SPI Firewall" and uncheck "Filter anonymous Internet requests" and click on save settings...

  Now, you must power cycle your network... Disconnect the power from the router and Modem, wait 30 seconds, then reconnect the power to the Modem, once all the lights are the cover on the Modem, then connect the power supply to the Linksys router...

  Now, you can check the speed, the speed you get it on your computer...

  If you are still having the same problem then I think that you need to update the firmware on your router... Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router... In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• VRTX - NIC firmware update

  I might be missing something obvious, but I can't understand how to upgrade the firmware of the network adapters attached to the chassis on a VRTX.

  Mapping a map NETWORK to blade and trying to update its firmware to the blade iDRAC do not work (it does put a job in the queue, restart the server and go as far as the update screen, but then fail).

  And there is no tab "update" on the CMC interface for PCIe components (it is one of the components of the storage, so I expected to type something similar...).

  Any idea?

  NICS are Intel I350-T4. Current firmware is 15.0.27. The target firmware is 16.0.24. Everything else on the blades and chassis VRTX is the most recent version, AFAIK. It is a license of CMC Express.

  It turns out that I have has been missed something obvious and this is the important information section on the support page of the firmware (lack a bit of professionalism, it is true...). That clearly states that you cannot go directly from 15.0.27 to 16.0.24 during the upgrade by the controller of the life cycle of the blade (via interface iDRAC, iDRAC settings/update and Rollback). What you have to do is to 15.0.27 --> 15.5.0--> 16.0.24. And indeed, it works. If this has nothing to do with the VRTX and with this specific NIC firmware.

  Thanks in any case Chris to try to help, it is always appreciated.

• Where can I find Firmware Restoration CD 1.3 to download?

  I need to reflash an old Mac Mini. Through documentation of the Web site located at Firmware Restoration CD 1.4, it said I needed to download the Firmware Restoration CD 1.3, which does not exist. Anyone know where I can find it?

  Firmware Restoration CD 1.4 - Apple Support is the first thing that appears on a Google search.

• Firmware update failed, TC is now unavailable and no led light

  Found my TC this morning flashing yellow, found a FW update was available, clicked on update, downloaded FW but then he could not update and now TC is unavailable, I tried to reboot, but still no TC, before LED is off even on/after power on.

  How to treat?

  How to treat?

  Time Capsule 802.11n (4th Gen)

  The symptoms are typical of a Gen 4 TC... so thanks for putting this info in your profile.

  The new firmware is not the problem... However, the drop of water that makes the vase overflow. Your TC underwent a total failure due to bad soldering... the attempt of the update was this slight element of stress which caused the catastrophic failure.

  If you are a handyman, there is a fix... It of free... and set up to present enough to say that I am fairly confident with your symptoms, it will fix it.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• Can I change password Firmware from another Mac

  Can I change password Firmware from another Mac

  N °

• Resound LiNX2 Firmware 961

  I will get my first pair of hearing aids,² 961 LiNX RIE, 20 Sept. Pending this installation, I did my homework, including by participating in these forums of Apple on this topic.  Firmware seems to be a recurring topic here I'm worried.

  It seems that there is always a period to shake, with a lot of messages on the Bluetooth connectivity issues with updates of firmware sometimes correcting a problem.  While only cautiously optimistic, I want to be proactive in avoiding problems for my first experience of hearing aid in getting firmware updates as quickly as possible. Who needs to address my concern that, with regularly updated iOS updated to Apple (the last being downloaded 9.3.5 recently), connectivity can glitch again until an updated required corresponding firmware applies to my hearing aid (or vice versa).

  I don't expect my audiologist to warn me when a new firmware is available.  I also searched sounding site and do not see the links to all the pages that show the current version of the firmware, or all the instructions telling me how to check if my hearing aids have this latest version of the firmware.  (Yes, I will ask my audiologist which version I get in the original timeline.)

  I look forward to the improvements to the web site and possible Smart app where it just would not confirm if my hearing aids are up to date, but it is also possible to download and apply updates firmware for hearing aids via the Bluetooth connection, rather than an appointment to audiologist.  In the meantime, I'm looking for a way to get automatically notified (perhaps a list of electronic distribution to consumers and professionals) when firmware updates are ready to apply, with confirmation what version of iOS is required for compatibility with this firmware.

  Comments?

  This looks like a "problem of sound" - they will be able to tell you how to check the firmware version, how to use their app and if they support the user after the updated and changes or additions to their software.

  I suggest you seek their support site, forums, or use their contact information as a last resort. They know more about all the things you want instead of Apple users who help out here.

  In regard to updates to iOS, look in "" settings > iTunes and app store ", uncheck"Updates"to stop the automatic updates of operating system." You can do the same for apps if you want to really too much manual control over them. You should read the release notes and comments to work if the updates will change anything that you depend on.

  P.S., wait and see if others can help here too

• Keychain, iCloud + problems of Photos on MBPro since changed password and password set firmware

  Hello

  I recently changed the password for the connection on my main account on my MBPro and added a firmware password, but that doesn't seem to work properly: whenever I reboot Keychain keeps asking me to access the local keychain and all iCloud apps are disabled. I also have problems with pictures. FYI my boot HD is encrypted with FileVault.

  I put details on the issues below, as well as what I tried so far (based on the collected suggestions from these forums) as well as some newspapers Console elements that seem strange.

  I don't know how to proceed at this point that some options might make things worse if not done does not correctly (or in the right sequence). I'm tempted to disable Firmware password, go back to the old password, or turn off FileVault to see if the problems goes, but I'm afraid it might make things worse (and I would like to have these features runs later). I also have the opportunity to reinstall the OS and return to a previous TimeMachine upward.

  I would appreciate anyone's help on this one.

  Thank you very much.

  DOM

  Plug

  MBPro Core i5 2.7 Ghz 13 "retina

  16 GB RAM 256 GB SSD + 2 TB external HD.

  Mac OS X 10.11.16 (15-1004)

  FileVault is running on the boot disk (SSD).

  Firmware password has been set.

  I have a Time Machine backup (on a second external hard drive).

  I installed a functional copy of Mac OS X on an external hard drive 3.

  I do not use iCloud keychain.

  I have another admin account that works.

  Problems:

  (1) Keychain: whenever I start the CommCenter ask the session keyring password (I must then enter the previous admin password).

  I wonder then if I want to update the local keyring: to do this I have to enter my new login password in the "current password" and then I type the same new password fields. Once I reboot the problem reappears: exactly the same sequence, as if the information could not stick. Might have something to do with the FileVault and Firmware password.

  (2) iCloud: after having rebooted and enter my passwords from keychain as described above, none of the iCloud applications work (email, Messages, Contacts, calendars, reminders, Notes, find my Mac, iCloud drive, etc.).

  He tells me tells me he is not able to connect to iCloud and asked me to try to do it in the preferences panel. When I tried to connect there, he couldn't connect to iCloud and told to try again later.

  (3) photos: at the launch of Photos he says he cannot open the library system and propose to choose a. When I choose the right pair, it opens fine, but a ton of photos are most referenced correctly. All images come my an external HD (the iPhoto library is also on the same HD), and nothing has changed in the structure of folders.

  What I tried (after the Time Machine).

  1. I installed Mac OS was last updated.

  2 - I activated the guest account and tried to connect: it only works Safari.

  3. I logged in using another admin account: no problem with Keychain and all iCloud apps work. Not tried Photo since this account is not a library and is not configured for access to the main account.

  4. I tried to boot into safe mode: is not work (might have something to do with the password FileVault and Firmware).

  5-return to the main account I ran disk help and fixed permissions: discs seem to be ok.

  6. in the key string App I locked and unlocked keychain using the lock in the upper left corner of the application. When asked for my password I just typed my user password. When I rebooted I had the same problems.

  7. I've tried updated the password in the keychain app by entering the old password and then my new password for connection in the other two fields (new password and confirm). Still problems with iCloud and after restart I have the same problems of Keychain.

  8 - I tried resetting my default keychain: I got an error, because I don't have the permission to do so.

  9 - I tried to create a new keychain session and making it the default keychain, but I keep getting the same problems (iCloud does work does not + issues of password even after I reload).

  10 - iCloud: I tried to close the session from iCloud, then enter my iCloud ID and password, but it says no more: it cannot connect or that the Mac is already connected to this account. I closed the session again, iCloud used Safari to manage my AppleID (https://appleid.apple.com/), listed devices associated with and my MacBook off the list: I always have the same questions even after reboot. I even tried to delete the iCloud account since the Internet Accounts preferences panel, but it is not listed. I tried to add it, but he said that the Mac is already connected.

  11. in Terminal, I glued the special order in some discussions (find ~ $TMPDIR..------(-+ flags sappnd, uappnd, schg, uchg o! - user $UID o! - perm - 600-) 2 > & -| wc-l | pbcopy) and got 21 to 22, and a result the first time earlier.

  12 - looking at logs just console after reboot, I see a couple of things that seem odd that appear multiple times with slight variations (I paste only an example):

  Sandbox: launchd (1) system policy: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64h link

  HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

  sharedfilelistd [356]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications. SFL with error error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentApplications.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications sfl NSUnderlyingError = 0x7fd93a70ec20 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  [NetworkDefaults]: cannot write new default values of network disk: error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"networkDefaults.plist"in the folder"Géoservices"." UserInfo={NSFilePath=/Users/Marc/Library/Caches/GeoServices/networkDefaults.pli st, NSUnderlyingError = 0x7fb1dbf69530 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Circle Notification [448]: Displayed at the launch:)

  )

  securityd_xpc_dictionary_handler Keychain circle [448] DeviceInCircle error Domain = com.apple.security.sos.error Code = 4 "Keybag never unlocked, ask after first unlock" UserInfo = {NSDescription = Keybag never unlocked, ask after first unlock}

  iconservicesagent [381]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7fbfe36118a0 >.

  accountsd [384]: [warning] Services all gone, delete all accounts

  SpotlightNetHelper [420]: __tcp_connection_tls_session_callback_write_block_invoke.434 tcp_connection_tls_session_error_callback 12 22 error

  Quicksilver [470]: Error resolving alias file:///Volumes/ABC/DEF/GHI.JPG%20alias: error Domain = NSOSStatusErrorDomain Code =-35 ' nsvErr: no such volume.

  Sandbox: SpotlightNetHelp (420) deny (1) - reading-file data/Applications/App Store.app

  (This repeats for many applications and their content files)

  12 - looking logs console after entering my iCLoud references (in the prefs ICloud panels) I get at least about the error that is similar in the newspapers after the reboot (cannot save SharedFileList)

  com Apple.Preferences.iCloud.RemoteService [512]: error = AKAuthenticationError Code =-7034 '(null)' Domain: AKAuthenticationErrorForcedFailure

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveTrackingHandler:-1856

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveReceiveHandler:-1856

  sharedfilelistd [283]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  sharedfilelistd [283]:-[ListStoreSnapshot writeToFile:] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Access application for Keychain "login" after changing the password

  The problems of Keychain - see post of khati

  OS X always ask to use your passwords in keychain

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.