WRT160Nv2 guard give up the connection

Similar Questions

• RALink rt5390r wireless guard give up the connection

  I have the Office of CTO H8-1540 8.1 Windows running.  This machince has been bundled with Windows 8 and I experienced the same behavior on the two OS'.  I have no problem getting a connection, but I can't keep the connection.  I have a RT5390R of RALINK 802.11bgn card with the version of the driver from 5.00.37.000.

  This machine and master connects to an Actiontec MI424WR Rev I have router.  On a wired connection, I get 75Mo down and 37MB upwards.  The wireless connection is only 44.5 MB donw and 38.7 upward.  Troubleshooting of Windows usually fixes the problem if I'm on the PC.  The connection failed twice when entering this question on the Web site.  I would also add that I have 2 other laptops HP, who do not have this problem.  I have also 3 Android devices and 2 Apple products that do not have questions to stay connected.

  HP has replaced the RT5390R wireless card in my destop and returned the PC yesterday; 4 June 2014.  The PC has been on my local network 24 hours at this point, which would be longer that I never saw him standing in the past of 23.5 hours.  I am considering whether the resolution.

  For those past the warranty, I would suggest adding a product of reliable wireless alternative to replace the RT5390R.  If your PC is still under warranty, contact HP before the expiration of the warranty.

• WNR3500 guard give up the connection in California

  OK, I called TWC cause I keep losing my connection to the net, I have a router WNR3500 w / the latest firmware, I can't find anything more recent, I use Netgear for years, said TWC this only affects those whose routers Netgear in California, I run cable Cat6 and have a 1 Gigabit connection, my modem is a Motorola SB6121 Docsis 3.0 modem and my connection is 20/2. NETGEAR is working on a fix?

  The abandonment of the connection, they told me applies to all routers Netgear to California on the TWC system...

  OK I think this can be marked as resolved, I had a tech call me BC, he crossed the router and I settled on changing the settings DNS to Open DNS for the primary (208.67.222.220) and Google for the scondary (8.8.8.8), almost 2 hours have passed and I think it's a success, no new firmware is required , is for a good all in a new router, probably not before that let's go, I'm sure this will be my last post in this thread.

• Server to the House Acer Aspire H341 guard give up the connection and I can't access the files.

  The server worked flawlessly for 2 years.  Now it the intermittent connection.  When I try to back up a computer on the server it the backup starts but stalls and I get an error message saying that there was a problem with the software of server connection.  I reinstalled the software of connection to server with no improvement.  Restart the server generally means I can access the files again, but it will still drop the connection.  The same problem occurs on all five connected computers.  All running Windows 7 family 64 or Windows XP.  I did have a backup successful PC in two months. I am desperate for help.  Had the server in the computer store and they could not in the absence of it.  They had to install the software of my original disks, so I wonder if it's an automatic update (including the computer store would not, by returning to the original disks).  Everyone suffers from the same issue?

  Unfortunately he wa a sign of a failure of network card.  As it was an integral part of the unit, replacement was more expensive than the original server.  So I bought a new server.  He has managed to move the hard drives on the new server.

• WNR3500 guard give up the connection

  Every 4 or 5 days my WNR3500L removes the internet connection and wifi connections.

  I run with the V1.2.2.48_35.0.55 firmware (latest).

  When I pass the power and the new router works again.

  Can someone give me some advice?

  Hi, it helped to downgrade the firmware version, as described above.

  I switch off the settings to install the latest firmware.

• WiFi guard give up the connection on Inspiron 11 3000

  Hi, I use laptop Inspiron 11 3000 with windows 8. I am facing problem with wireless connection. It is unplugged, it takes up to 5-10 minutes to reconnect again.

  I have the drivers installed on my system.

  Driver: Dell 1708 802.11b/g/n (2,4 GHz) wireless
  Seller: Broadcom
  Vendor: Broadcom
  Date: November 11, 13
  Version: 6.30.223.201
  INF file: C:\Windows\INF\oem62.inf
  Files: total 4
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\bcmihvsrv64.dll
  C:\Windows\system32\bcmihvui64.dll
  C:\Windows\system32\drivers\vwifibus.sys
  Type: Wi - Fi Native Driver

  Please give me some solutions. Thanks in advance.

  param3sh,

  Please continue with Jesse.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Go to start > Device Manager > advanced > bandwidth capacity > change to 20 / 40 mhz

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Satellite M60 guard give up WiFi connection

  An M60-144, I provided one of my clients has problems with its WiFi connection. It will be ok for 5 to 10 minutes, and then suddenly will drop the connection. Turning off the WiFi and back on again remakes the connection and everything is very well for 5 or 10 minutes.

  The access point is a Draytek Vigor 2600 G and there are other laptop (Portege R100, R200 Portege and Tecra 9000 Tecra A2) that all connect to the same access point to the same place without any problem. The AP employs 128-bit WEP encryption runs in mode 11b and 11g of mixtures. Any other potential sources of interference, for example the DECT phones have been rejected.

  The laptop has all the updates of Windows applied and drivers the most recent site. For me, it screams of a hardware problem with the wireless card, but wanted to know if there are other suggestions first?

  Hello

  I read a few topics on similar problems and in most cases, the update of the WiFi pilot solves the unstable Wi - Fi connection. As far as I know on the Intel Web site you will also find a newer version of the driver. In my opinion, you should check this option.

  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Best regards

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Wusb300n w / WRT160Nv2 - unusable! Give up the connection again and again

  I spent at least 16 hours trying to get my to work with WRT160Nv2 WUSB300N

  firmware on router is v2.0 02 last, latest drivers: ftp://ftp.linksys.com/downloads/NA/drivers/WUSB300N_20071204_dr.zip

  I use windows zero Configuration tool.  wireless monitor not installed as it was unusable.

  I can connect to the AP perfectly, but no matter what time, I try to upload a large file, say more than 10 MB, it disconnects.

  It appears after a certain amount of data is transferred, whether by downloading a large file or not, it disconnects

  This product is totally unusable.

  I've tried everything

  Current settings:

  WPA psk / tkip

  mode: joint

  the standard 20 mhz band radio (only other option is automatic)

  broad channel: 3 (grey outside, I can't change that)

  standard channel: 11

  When I tried to put the 3 above options auto same problem

  evolution of the rts and fragmentation threshold threshold did not help

  network configuration: wireless access point is 10.191.191.253 acting as a switch, connect a switchport to the Firewall ASA 5505.  DHCP is granted to ASA and disabled dhcp a wireless access point.

  again, everything works well in terms of access to the internet but connection is to move after a certain amount of bytes sent =)

  Please advise...

  Thank you

  There must be a bug in WPA PSK personal... as soon as I switched to WPA Personal 2 all problems went away.

  Is this a known issue?

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WUSB600N temporarily lose connection (do not drop the connection)

  Hi all! I had my WUSB600N for less then 1 year now, and I never really seemed to make it work properly. It tends to decide when he wants to work. Anywho...

  Here's the main problem I've had for the past month (which is even more annoying then the last). For some reason, then the adapter doesn't want to give up the connection to the network (most to least), he temporarily stop to do anything. I don't really know how to explain it other then when I surf the net, I can load a few pages fine and then all of a sudden, that none of them will load. They will stay there with a loading vacuum/progress bar and then eventually lead to an error page.

  My connection seem fine throughout the process according to the Windows Vista network and connection Center thing, usually within 3-5 bars (apparently these Visual data is not a very good estimate of connection those, however). That's what me stem. If my connection seems perfectly fine, why none of my pages would load and only temporarily? Sometimes, if I wate for about a minute and try again to load the pages, they work.

  I read somewhere that Vista has a system of offset in place or something that refreshes the connection or something in that sense every 60 seconds, so I gave Vista anti-Lag a go and it does not solve my problem either. I have the updated driver from Linksys for the card and thought to give it a go a last ditch effort, but hoped someone might know what is causing my problem of Rainlink.

  Here are the specs of PC:
  Windows Vista Edition Home Premium
  2.20 GHz AMD Phenom 9550 Quad-Core Processor
  5 GB of ram
  64 bit OS
  I use Firefox v3.5, but the same problem occurs in Internet Explorer (so I assumed the browsers can be removed from the equation).

  Also, I connect to the wireless network is sent to a D-ink Wireless N Router (DIR-615). I can not really change this but if this is the problem that I am a tenant of a House of friends.

  I hope someone can help out me! Any help would be greatly appreciated! If you need further information, technical specifications, etc., feel free to ask! Thank you!

  Just a quick update for everyone, I downloaded and used WLANOptimizer for the last 3 hours today and so far, it seems to have corrected my problem. I will post if this changes!

  If your experience of the same problem, I was and you are interested to try the program out, head to this page:

  http://www.Martin-Majowski.de/wlanoptimizer/downloads.php

  It's a small 755kb zip file, and the program itself uses an acceptable 8 632 k memory (Acceptable for me in this situation anyway!). As I said, your experience of the same problem, I've been if, please try this program and let me know if it will fix it for you so that we can see if this could a fix for some WUSB600N problems!

• 700 - 430qe envy: Wifi guard fall immediately after the connection manually

  Wireless of my new office as envy worked well for about six weeks and suddenly can't stay connected. I have at least 7 other devices using the same router wireless without any problem.  The connection drops at seconds.  Sometimes I can get a Web page to load but not a second.   I changed the channel on the Router 1, 6 and 11, but that did not help.  I also deselected the option to disable the network card in the computer to save energy, but even once, it did not help.  I can't find advice on the internet that seems to help.

  Network adapter: Broadcom BCM43142

  Windows 8.1

  Hello @sharps34,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the wireless connection between your computer and network guard falling intermittently, and I'd be happy to help you in this case!

  To re - establish a coherent link between your computer and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.

  In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with

  the connection to the network:

  1. open DEVICE MANAGER
  2. open the NETWORK CARDS
  3. right click on the WiFi adapter for the pc and left click on PROPERTIES
  4. click on POWER up.
  5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  6. click on OK
  7. close DEVICE MANAGER and test.

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• Why windows live mail gives me the error code 80048820 0 x if I boot windows before establishing my broadband connection?

  I have recently upgraded to windows 7 with a flash drive.  Windows starts now in 30 seconds - which is a lot less time that it takes my router broadband (wired connection to my PC) to start and establish an internet connection.

  If I switch both on the freezer, boot windows right now, Windows Live Mail will not download my emails from Hotmail, it gives me the error message I pasted below.  It will not work until I have restart windows.
  If I wait until my router is initialized and has established a connection, then on windows startup, the emails work fine.
  If I have the error and then restart, then I can check my emails OK.
  It seems that if windows 7 can not detect an active internet connection when it starts, it initiates this error...
  Any ideas?
  Can't send or receive messages for the Hotmail account (Whitling2k).

  
  

  Server error: 0 x 80048820

  Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.

  Windows Live Mail error ID: 0 x 80048820

  Your DHCP server on your router is.  It assigns addresses on your local network.  It must be up and current run when you start Windows or your PC will not get a valid IP address.