WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle

Similar Questions

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• Work wireless, but not Internet

  I use a WRT54G Router.  I am able to connect to my home network via the wireless but no Internet on any of my wireless devices.  It works only via Ethernet.  The firmware version is v3.01.3.  Any ideas what I did wrong?

  Hi mullahraheil, to properly isolate the problem, try changing the name of the network wireless and communication channels. Try the channels 11,9,3 or 1. Try to reconnect. If the same persists, you need to maybe do a hard reset on the device and reinstall it from scratch.

  To make the correct reset, please press the reset button at the back of the router for 30 seconds when the unit is turned on. Unplug the unit. Reinstall everything from scratch. Hope that helps.

• Wired laptop but unable to connect to the laptop wireless wireless PC can connect cable PC OK

  I have a wired network on whiich, I connected a WAP54G access point for my laptop wireless to children. They are never anything other that connect to the internet, so I never noticed this before. Now, I bought my own laptop and that you want to connect from my main computer but the laptop is not visible on the network. I then connected directly on the laptop to the network wired through an ethernet cable, and it was visible from the wired PC as you would expect. Back fi he returned invisible.

  Does anyone have ideas, what could cause this behavior?

  Thanks for all your comments

  Presumably using your XP or Vista!

  You need to change network settings into the laptop to allow remote connections according to the directives of the wired connection.

  You will also need to make changes to the false firewall XP/Vista has as well.

  FYI: The WAP54G has no way to filter all network traffic, so the question is not to the AP.

  Concerning

  Fred

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Windows 7 - connected to wireless but no Internet access

  I understand that this has been asked before and there are many "solutions" posted on different forums that are not relevant to my problem or simply do not work.

  A few weeks back, I was on vacation, my daughter called to ask if I had cut the internet router and BT Hub as she was not able to connect to the internet. It had been fine the day before. I didn't and I couldn't do a lot the lot so said I would sort when I got home.

  I just spent the better part of a week trying to access the internet on his laptop, a Toshiba running Windows 7. I know that the internet and wireless works perfectly as his cell phone is sitting right next to my Sony Vaio running Windows 8. Also, my Sky TV, Kindle, Iphone and iPad to my wife connect seamlessly. It would seem that the possible culprit is a Windows Update which took place on 31 August. I tried to go back to her but she was advised by a friend to uninstall the update and she tried to make a file at the same time and now the reversion will not work.

  When the laptop starts up, until I connect, there is a dialog box indicating a wireless connection and correct network is listed.

  

  However, after I connected, even if the wireless connection is still showing as a good signal and 'Connected', it is currently connected to: section shows network not identified; No Internet access.

  

  I ran the gamut of the instructions in uninstalling/reinstalling the drivers of network, playing with the settings of Virtual WiFi miniport and almost everything that is proposed on the other forums but not luck so far.

  All I know is that someone will want to see the command ipconfig/all results so here they are. I removed the spaces in line to get them on a single page.

  

  Short using 'rebuild the hard drive' Toshiba, I am now at a loss to know what to do. I would also like to know WHY this happened and how it could be avoided in the future.

  Any constructive help appreciated.  Thanks in advance.

  WINDOWS 7: CONNECTED WI - FI NETWORK, but 'no INTERNET '.

  Solution:

  Start > search, then type "services.msc", click on "services": "

  in "extended", make sure that "DHCP Client" is the "road". Then click on 'standard' of a window, make sure that 'Internet connection sharing (ics)' is not 'disabled '. If this is the case, then click on it. In the "General" window, search for "Startup type", it through «Automatic (...)»

• 21 Pro slate - Gets the IP address but no Internet connectivity

  Hi all

  I have a slate of 21 Pro with no internet connectivity at home.  The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:

  * Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem

  * Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy

  * Switch 24 port managed gigabit Netgear

  I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.

  (OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).

  I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.

  I'm puzzled. Any ideas?

  Thank you
  Steve

  UPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.

  Weird!

• Satellite P300 connected to the WiFi router, but no internet connection

  Help!

  I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
  I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

  Any suggestions would be greatly appreciated.

  Thank you

  Hello

  If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

  Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

  Welcome them

• Z500 connected wireless but no internet

  I recently moved to a new country house. My Lenovo Z500 worked perfectly in my old House for 2 years. In my new home, my laptop connects to the router wireless (Netgear) but unable to connect to the internet. My other devices (tablets, smartphones) are connected and have no problem. I tried many of the suggestions I found on this site, but nothing helped. The troubleshooting says "your computer seems to be configured correctly, but the device or resource (DNS server) does not. My Lenovo Z500 is pretty useless now, please help! Thank you.

  problem solved: changed the DNS settings in ipv4 to automatic.

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• printer offline depending on the laptop wireless

  When you attempt to print from laptop wireless dv6 HPavilion indicates Photosmart 309 a printer offline.  Printer shows connected to the router

  Hi storybook.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I'll be happy to help you.

  I have provided a document for "Printer is off-line" Message appears on the computer and the printer does not print to see if we can solve this problem.

  If you still have questions please provide the results if we can quickly understand this.

  Thanks for posting on the HP Forums.

  Good day!

• Compaq Presario C776CA connects wireless but no internet

  Compaq Presario C776CA Notebook PC

  Never had a problem until we changed our internet provider... now, he cannot get a wireless internet connection. If I plug the ethernet cable, it works very well. We have a 2 other laptops in the apartment that all connect to the wireless very well (if it's relevant, one is a mac book and the other is a computer laptop gateway).

  I tried all troubleshooting stuff and nothing works. I tested haven-t, but I do not know the laptop would be still not connect to other wireless connections, but not this one. WHY and how to fix it?

  This is the error I get on Google chrome: (sorry, in French)

  Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the DNS server address.

  Help, please?

  Hello:

  If you have a network Atheros wireless card in your laptop, see if the latest driver solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Paul

• updates to iOS app show filled in the App Store but not apps actually updates

  There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...

  1. I opened the App Store.
  2. Press update of all.
  3. I saw the download of updates and the finish.
  4. Open the button is appeared next to the application in the list of updates.

  The problem:

  1. Applications will not open by typing open the button next to them.
  2. I went to the home screen and the applications in question are darker color.
  3. I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
  4. The apps started to download it again.
  5. Applications is is stuck in download.
  6. I turned both devices power off, then turn it back on.
  7. On my iPad: apps started to redownload and completed. Applications are now open.
  8. On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.

  I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.

  I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.

• Aspire 5738z motherboard works outside the laptop breaks but not?

  Hope this is the right part of these forums...

  Someone at - he heard of this before. (STUPIDLY), I decided that my fan needed a good, clean, and in a moment of madness I removed the heatsink and cleaned, I have had no paste to renew with at the time but thought it would be ok.

  Acer Aspire 5738Z dedicated ATI Graphics Intel Core 2 Duo

  I missed the fan plug when I re assembled the laptop and of course, it wouldn't start. So after back by getting the cleaners and stick and PLUG the fan, I tried to start again... Nothing to do apart from the fan works and stops, then comes back on - the power light lights up - the processor lights up for a second - and the cd tried to run.

  I did all the usual like removing the Ram etc Hold button power and did so on... still no joy

  So I stripped the motherboard into the case and everything took off, I have replaced the following only

  HARD DRIVE

  1 x 2 GB Ram

  Monitor

  Battery

  And success, that it starts without a problem

  I tried then restarts and they were very good, so I put everything together and nothing only happened?...

  So I stripped it again and this time I plugged everything

  HARD DRIVE

  2 x 2 GB Ram

  CD/DVD

  Monitor

  Battery

  WiFi

  USB mouse

  USB keyboard

  Began and once again without any problem she started and restarted a time without end. So I removed all and placed in the base of the case and then reconnected everything and got the same good boot. I then placed the upper part of the base on so he was running and it was fine, then I rebuilt around the laptop running until the unit was together again... Always slept running. Although my mousepad not working keyboard

  OK, the moment of truth... Restart... or rather not - back to the beginning with no boot

  Does anyone have any idea as to the cause - I wonder if the keyboard or mouse may be at fault, but as far as I know, it could be more sinister.

  Any help would be fantastic - but please no suggestions to remove the ram and pressing the power button down as my finger no headache trying this lol

  It seems to me the connection of the USB unit on the side of right which is at fault. I have rebuilt the laptop but removed the USB cable and it works fine... Looks so much like problem solved for the moment in any case

• Printer does not print on the laptop wireless

  I have a wireless computer notebook as a desktop with a router. I have been using an HP printer on the desktop without any problem but when I installed the HP on wireless laptop I can not get the printer to work. Any suggestions?

  See the section "Accessing a shared folder or printer with Windows Vista"

  File and Printer Sharing in Windows Vista
  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Windows Vista: networking
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  Select the file and printer sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  What model of HP printer have you have, have you installed all the drivers for it on the laptop?