WRT320N abandons the connection after minutes

Similar Questions

• NETGEAR D6200 abandons the connection

  My netgear d6200 sometimes abandons the connection to my ISP, Ive tried to pass by the resolution of the problems several times and it goes through me by the same steps over and over until he finally asked my ISP details and then connects again and works fine.

  Additional information:

  1 details are all correct

  2 restart does not help

  3. it may take up to 2 hours just to do my job in connection

  Hi @Doswa

  Welcome to the community!

  You have the connection Mode is set to "Always On"? Otherwise, set it to this mode and observe your connection.

  What is the version of firmware installed on your gateway modem?

  In addition, make sure that you have the latest firmware installed on your device.

• Dell Server randomly abandons the connection to users.

  My Dell Server randomly abandons the connection to users in a building where the server does not find.  Different computers will sign the account and then randomly lose the connection to the server.  Thoughts?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• WRT110 abandons the connection

  Good day to all!

  My WRT110 interrupts the connection from time to time, once or twice randomly per night + when one of my other PC starts.

  I have a wired Synology DS209 NAS, Internet broadband (via modem) and several wireless computers. In this case, the problem is reproducible: I have a connection on 1 PC, and when I start one of the other PC, the connection drops for 5 minutes (both internet and to my NAS) on all connected systems. After these 5 minutes, each system will connect again. All systems have DHCP turned on and all systems have different IPs just before that happens. I did a "return to the default settings" and power cycles, but the problem remains.

  When I look at with Vistumbler (or NetStumbler), I see 90% to 0% signal drop once by - say - 5 minutes and irregular.

  Should I get a faulty router?

  Thanks for a reply...

  Drogreder

  On the computer windows 7 disable IPv6 under for two adapters Wi-wired and wireless LAN settings.  Restart and try again.

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• Equium M70: card wireless regularly abandons the connection

  Hi, I wonder if anyone can help. My map regularly just Equiuim M70 wireless abandons its connection. If you browse on wireless networks, it seems my WEP encrypted network and it's one to connect to, as it says "Automatic" by him.
  If you click Connect it crashes with just "Waiting for network. So he can reconnect I have to go to network connections, right-click on the wireless connection, turn it off, then turn it back on and then it reconnects quite happy.
  I have the latest version of the installed Intel drivers and am allowing Windows XP manage connections.

  My Thinkpad R50 does not suffer the same problems. My wireless hub is a Dlink G604T.

  Has anyone else had similar problems - y at - it a cure? Is this a case of return my M70 and to repair/replace?

  Thank you

  Hello

  This problem also appears if WEP encryption is disabled?
  To me, it sounds like the card is not able to take the IP address automatically.
  This similar issue happens on my Toshiba laptop not. Sometimes, I have to use the repair of the WLan connection option to renew the ip address.
  It s not very serious problem for me and I can live with this question.

  I read in a net that can sometimes happen because of encryption theWEP and SP2.
  But if you want to get more details on the legs of connection on the M70, I suggest linking the Toshiba service partner in your country.

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keeps remote desktop abandon the connection

  Hello

  I have just upgraded to Windows 7 Windows 8. The main question that I have now with Windows 8, it is the remote desktop client is somehow broken for me. Whenever I use it, it blocks (i.e. I can't interact with the remote computer) and then I get the box of Pseudo-dialogue indicating reconnection it will reconnect and I return the remote access. He does it all the time (about every few minutes). Note that when I can't interact with the computer to remove it, I can still ping it very well. Clearly, it is not a connection problem.
  It seems to be a problem with Microsoft Remote Desktop Client because I'm so tired, I tried 2 alternatives: terminals and mRemoteNG. Their use, never removes the connection.
  However, I would like to use the Microsoft client as it is more convenient to use. I tried to copy some binary files from Windows XP or Windows 7, but they do not work properly when I try to run them, I guess it's more than a simple 'mstsc.exe' to copy (I copied c:\windows\system32\mstscax.dll thus, but it kept loading of Windows 8).
  Anyone with a similar problem?
  Thank you
  Manu

  A fix came out 11/13 which appears to solve the problem for me. The number is 2897602.

  http://support.Microsoft.com/kb/2897602

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

  Greetings,

  I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

  Please advise on the correct module (P/N) for the 5 GHz model.

  If not supported, please refer to the best module that corresponds to my laptop.

  Thank you

  Hi @slimmy10 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413.

  Here is a link to help as well.

  If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

  Hope it will be useful.

  Thank you.

• AM300 abandon the connection

  IM connected to a Linksys AM300 Modem and within hours it will drop the connection and get ip address of 169.254.193.178

  -J' have flashed and reflashed the modem with the latest firmware, I have reset and reconfigured it 5 times more.

  -It is not connected to any router just directly to a computer and lan cable

  -J' set the modem to my ISP recommended settings and also tried experimenting with different settings

  -J' tried to put the static IP address and also try another computer MAC and PC same problem.

  Help please.

  Well, from what you described I suppose it must be defective and you may need to replace it as you already have to level/flashed the firmware, handed over to zero and re-set up a couple of times... Confirm the settings of your ISP again and see if there is any change, nothing else, you can try...

• WRT54GL abandons the connection when you are using the 2.4 Ghz cordless phone.

  I recently upgraded to a Linksys WRT54GL router and also hooked into a phone jack of magic using a 2.4 Ghz cordless phone. The interent connection is perfectly fine until I try to use the wireless phone.

  Within 60 seconds, the completely wireless signal drops and interrupts the connection from the phone. About 30-60 seconds later the wireless signal comes back and sometimes the computer reconnects automatically.

  My router is in a totally different room on one ground other than cordless phone base, and I already changed the channel on my router for 11. My computer is the only thing in the House using the Wi - Fi connection at the moment. What causes this problem & how to fix it?

  p.s. The wired computer sees no interruption of internet connection while the phone is in use.

  
  

• Want to m6 - 1158ca: Intel Centrino Wireless N-2230 keeps abandon the connection unless a specific driver version is used.

  Regarding N-2230 INTEL CENTRINO WIRELESS CARD ON YEAR WANT M6 - 1158CA

  OK, my computer was sent to the shop for the following reason.

  Wireless guard fall on me unless I use the driver coming from a clean factory HP restore.

  The driver in question works is: INTEL 15.10.3.2 - published on 08-22-2013

  Driver INTEL 15.5 version works as well.

  All other versions, including the latest intel pro wireless drivers, I have connectivity problems and they are pretty bad. I have to keep resetting the wireless adapter every 5 minutes or sooner!

  Makes me think of what follows. Is there a problem with the card, OR are these drivers specially configured to work with this card.

  It is not supposed that the drivers of the latest and should not work - unless the card begins to intermittently fail. I say this because the WLAN MODULE check past in BIOS diagnostics. But just becaused it HAPPENED, doesn't mean it isn't bginning to fail. I doubt that the diagnostic program looks at every single circuit on the map to see if it works or not.

  So, I put the question you guys. Because, if the technicians decide to change the map and put in a different INTEL CENTRINO WIRELESS N-2230, I'll have the same problems.

  And you might say: so what's the problem? Just use drivers that work!

  And I say good idea BUT these are drivers of Windows 8 and I want to use WINDOWS 10 and the pilots Win 8 will not / should not work. And which provides updates of Windows drivers do not work. And HP does not Windows 10 drivers for this model of computer. They rely on Windows update.

  So, from being as tech PC since the beginning of the 1990s, I think I know what I'm talking about.

  But, no man is an island of information on their own, so I put the question you guys and see what you're saying!

  Thank you.

  I think that I found a solution to my problem.

  First thing to note is that I am running on battery power.

  The solution seems to be the advanced power setting options for the adapter wireless performance MAXIMUM average energy saving.

  Once I did, I had connectivity again!

  Now let's see if this solution works for Windows 10.

  This solution applies to Intel 15.18.0.1 driver version

• EA4500 and PS3 abandons the connection

  I had a router WRT54G2 and started having trouble with my PS3.  It would connect for a few minutes then she would lose the internet connection.  I thought that maybe it was the router so I have now from the EA4500.  The same problem occurs again.  I have all my other devices wireless connected to the EA4500 without any problems.  The PS3 will connect and connect and then two or three minutes, I get disconnected.  I called Sony and Cisco to help and they were not able to understand the problem.  The PS3 is showing that my network has almost 100% signal strength, so this isn't a problem.  If anyone has experienced this or can help, I would be very grateful!  Thank you.

  @2shibas

  Hello

  Is this connected by cable or wireless your PS3? Have some port numbers for Sony, so you can do Port Forwarding on the user interface of the router? If this is not the case, try to contact Sony and ask for the ports necessary for the opening of your PS3.