WRT320N laptop computer connection issues
Hi all
I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.
Tom Brown
Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220
Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version
Operating system is Windows Vista Home Premium w / SP1 32-bit
Windows Firewall in use
AVG 9.0 antivirus
SuperAntiSpyware 4.29. 1004, core 4046 track 1986
Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182
I hope this helps.
Hi, do you have Network Lock active? If so, disable it, and then try to connect to your laptop.
Tags: Linksys Software
Similar Questions
-
Direct print from laptop computer connection
I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!
You have a wireless router? I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.
If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.
That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.
On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed. For me, it comes to 192.168.1.13. Enter the appropriate value, Next, Finish.
If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop. It would probably be a much better solution than to try to make a converter USB - lan.
-
XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.
Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot. Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.
Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.
The XP SP3 laptop detects the new hotspot very well. The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks. The 'Connect' button is available, implying that it would connect so click on new.
Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should. It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one. I compared the services running on two XP machines and have found no obvious inadequacy.
Advice?
Thank you!
When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?
I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)
- WPA/WPA2 Personal joint (safer, less compatible with older devices)
- IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.
Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.
Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.
-
Original title: Internet connectivity
my computer toshiba laptop windows 7 just started to fall sharply internet all in a show that is to connect to the internet all my other devices all always online - internet comes back randomly and goes off randomly - tried all settings to make sure that everything looks good.
Hello
Welcome to the Microsoft community.
I understand that you have a problem with internet connectivity. We apologize for the inconvenience caused to you. We also indicate the steps you did.
I would like to know the details below to help you better.
- What is the model number of the laptop you are using?
- Do you have a code error message when connecting to internet?
- You did changes to the computer before the show?
- You are connected to an internet connection wired or wireless?
I ask you to run the Network Troubleshooter utility first to see if it can help diagnose and solve your problem. Open the utility of network troubleshooter by right-clicking the network icon in the notification area, and then click troubleshoot.
You can also run the troubleshooter of Internet connections by:
- By clicking on the Start button, and then clicking Control Panel.
- In the search box, type Troubleshooting, and then click Troubleshooting.
- Under network and Internet, click connect to the Internet.
If the problem persists, try to perform the steps of troubleshooting mentioned below in Microsoft Help article and check if that helps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7
Keep us updated on the issue to help you better.
-
HP Pavilion DV6500: TV laptop computer connection
Hello
I just installed Windows 7 and am trying to connect my laptop to my TV. However, when I go to control Panel\Appearance and Personalization\Connect to an external monitor, I don't see the second monitor. (Have used an HDMI cable to connect to the TV).
p / n: KB341EA #B1A
Can you provide any help?
Thank you
Ioannis
Here's what I suggest you do.
Go to the Device Manager, expand the category graphics cards. Right-click on the graphics card from nvidia and select uninstall and check the box uninstall driver.
Restart and use the Vista of making driver in charge of your laptop and driver as follows page...
Download and run the above driver. You can get an error not supported operating system.
Conclusion of any windows error.
Go to Device Manager, click to expand the category graphics cards, click on the VGA Standard card.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp38834.
Make sure that the include sub and the driver should install.
Restart, and I hope that you will now be able to connect to your TV.
If this isn't the case, then it will not happen.
-
Laptop computer connection TV via HDMI cable... no image. ?
I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable. Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty. He continues to tell me that there is no signal, but both devices are connected.
Any help is greatly appreciated!
Hi Ashley... B,
Thank you for visiting Microsoft Answers.
Which version of Windows Vista is installed on your computer?
1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
Link to view:
What should I know before adding TV tuners to use with Windows Media Center?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
Hope the helps of information. Please post back and we do know.
Kind regards
Joel S -
Laptop computer connection HDTV
Try to connect my HDTV to my laptop to watch porn TV. Connected via a HDMI cable and selected the right input. My basic desktop with no icons, but everything that I select on the laptop, that I have only the sound and my desctop base coming through my TV, TV series. Can someone tell me what I am doing wrong. Superscrew.
Hello
You can upgrade the graphics card and check.
I suggest you to see the link below:
Connect your computer to a TV
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV
HDTV: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
Also try changing your screen resolution
http://Windows.Microsoft.com/en-in/Windows-Vista/change-screen-resolution
To learn more about the TV connection problem, I suggest you post it here:
Reference:
Windows/entertainment and connected home
http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspxHope this information helps.
-
Old TV to laptop computer connection
I would like to connect my old TV with a s-video cable to my Windows Vista laptop. I plug both devices and connect the monitor via the display settings, but the screen is still blank. Any suggestions? Do I need a new driver update, maybe a converter box?
Perhaps the following links will propose a few ideas:
How to connect my computer to a TV
http://hookpctotv.com/How to connect your PC to your TV
http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-setPC to TV cables and adapters
http://www.SVIDEO.com/PC2TV.html -
No picture on the channel from PC to TV laptop computer connecting Panasonic Plasma tv?
Original title: connect the computer laptop panasonic plasma tv
I have a laptop presario V3645AU, connected to the plasma panasonic tv with vga cable. I have no picture on the channel of pc on the TV [via a separate sound cable] should I update my grapics card or drivers for this problem
Hi Urititi,
You can try to change the display settings and check. .
Step 1:
a. open "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
b. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
Check out the link.
Connect your computer to a TV
http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Regardless of the browser that I use on my VISTA laptop, navigation stops... which means the laptop connects is no longer the DNS through the modem to broadband gateway to resolve the address of the Web site.
However internet is on and some applications that Act on the internet are connected and okay. for example: Skype
Hello
Try this process.
WinSock and TCP/IP
When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.
If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.
WinSock and TCP/IP update.
Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type netsh winsock reset at the command prompt and press the Enter key.
Do the same process to refresh the TCP/IP just replace the command typed with.
netsh int reset
And the sam to do this.
ipconfig/flushdns
Restart your computer.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Laptop computer connection directly to a projector and cannot see the screen of my laptop
I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop. When I hit the function key for display on the big screen, my laptop darkens. I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there. My laptop is running Vista Business Service Pack 2 and two weeks. Thanks for any help you can provide.
Hello Shawn,
Thanks for posting on the Community Forums of Microsoft Vista.
It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.
Also, follow the steps and try to set the screen parameter as follows:
(1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.
(2) setup that monitor the as a 2nd external display (projector).
(3) click on apply and Ok.
Restart the computer to see if you are able to see the screen on laptop and projector.
You can also check with the computer manufacturer to check if they have additional parameters to be changed.
It will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
Laptop computer connection problems Toshiba for HP Officejet Pro 8610
Hi, I just unpacked my new HP Officejet Pro 8610 and after close to two hours still unable to connect it with my laptop. I have a Toshiba Satellite S55 A5257 8.1 Windows running. The printer shows that it is connected to the correct network (with no other network name of the network). I tried setting up with the normal settings, then with firewall disabled, then with the firewall and antivirus, stop and went through all the suggestions on the software to solve problems of installation failure that has been suggested to install. Have also tried to turn the router off and on again and also turn off the laptop and turn it on again. Also the printer is off and turned it back.
I'd be more than happy to try other suggestions that anyone could have.
Update: a little while later, I have at least been able to print using a usb cable, but is not always wireless.
Hi Jimbo867,
Welcome to the HP Forums!
I see that your HP Officejet pro 8610 does not connect to your Windows 8.1 with a Wi - Fi connection. I'm happy to help you with this problem of connection!
Please see the following guides:
- "Can't find the printer" message appears on the computer during a Network Installation.
- The printer keeps Wi-Fi connection.
I hope this solves your problem and I thank you for posting!
-
Internet with the new portable computer connection issues...
I just bought a new laptop with Windows 7 and I constantly have problems connecting to the internet - and when I do connect his at a very slow speed. I didn't have this problem with my old laptop which has Vista. What should I do?
Hello
1. do you have a cable or a wireless connection?
Step 1:
Update of your network card drivers and check if it helps.
Step 2:Uninstall and reinstall the network card.
Follow the steps below to uninstall and reinstall the network card.a. click on startb. in the type of search box of start of "devmgmt.msc" and press enter(c) in Device Manager, expand network adaptersd. right-click on the network adapter and uninstall.e. restart the computer, and then reinstall the network card.When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '. -
I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem. The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information). It is on the same network as my laptop. However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page! I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.
Any thoughts on how I can get the laptop to see the printer?
Henchman21,
Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.
Solution
1. do you have the HP Envy 4500 connected to your computer via the usb cable
2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run
* Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.
2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.
2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...
3. you should check if you have administrative rights on the computer.
I hope that the solution I provided will work for you.
Let me know if the steps above don't work for you
Thank you
-
Hi, I'm looking to plug:
Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
(Windows 7-64 bit)LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615
Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.
Connections are correct & safe, I have:
Display settings - 1 | 2 shows multiple monitors, duplicate.
RES - 1366 x 768, landscape of the screen, displays duplicate. If I'm reading - 'another view undetected. "Graphics settings - Intel Graphics & Media Control Panel-display:
General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
Monitor/TV settings - not supported.Sorry about all this info, just want to provide as much as possible help to identify any problems.
PROBLEM-
My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV. Black & white, its sometimes a offline.
I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal. The only way I can see anything either again is by ctrl, alt & del.
If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.
Any help would be appreciated?
Thanks in advance
Cameron
Hey Cameron,
I suggest you to change the display settings on the computer and check.
Get the best display on your monitor
You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.
Please post back with the State of the question, so that we can help you further.
Maybe you are looking for
-
HP Officejet Pro 8620: One side scanning instead of both sides
Whenever we scan with the printer using ADF, ALWAYS scan both sides of the document. We want to scan only ONE side, but we cannot find any setting switching on both sides for only one party to scan. It's very frustrating because whenever we scan, we
-
I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.
-
Rescue &; recovery blue screen on T60 with XP and SSD
Hello world. On my T60 (2008-VPT) with Windows XP SP3, I have installed a (Verbatim 240 GB) SSD. I made a clone of the old HD on the new SSD and that I installed it on the T60. Everything is fine, but when I try to do a backup with rescue & recovery
-
Explorer 8 printing error (error dello script nella pagina)
error dello script nella pagina Linea 1507 character 1 error argument no valido Codice 0 URL res://ieframe.dll/preview.js
-
Can anyone with bright ideas on where I find the user manual for the above. The official FTP site Dell seems to be broken! Thank you