WRT54G good signal wireless but no internet connectivity.

I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

Any help that anyone can give is most appreciated.

Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

Tags: Linksys Routers

Similar Questions

  • WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle

    recently replaced EA3500 Cisco that quit smoking with WRT1900AC

    configured for the wired network OK

    will connect WIFI for android Tablet

    DOES not connect to win 7 PC... worked fine with the old router (2 years)

    reset the WRT1900AC to factory settings... allowed 2.4 and 5 ghz...

    PC sees the wireless network and connects with password, still "NO internet connection".

    any ideas?

    Thank you waltinbatonrouge

    Thanks a lot for taking the time to suggest a fix... But the WRT1900AC went back to Best Buy yesterday. Easy back, by the way.

    Oh just a parenthesis... the WRT1900ac has finally connected ok Cat5. The speakeasy speedtest showed on 100-105Mbps of download, the same as the old EA3500 seized croasse.

    So, instead, I found an EA3500 used in a store of the local computer. Reset default and he already had the latest firmware.

    The old router Cisco EA3500 used the very simple "Cisco Conect" utility.

    Forums directed me to a version EA3500 of the "Linksys WiFi Smart" utility, which was a painless and immediately picked up the wireless for laptop Toshiba.

    He ran the same features on the speedtest and connected 'excellent' on room android...

    Have a great week!

  • Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

    I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

    1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

    Rebooted 2.) the computer.

    3.) done a system restore.

    4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

    5.) turned on and off the wireless on the keyboard button.

    6.) as gone with the Device Manager and press update driver software for all network adapters.

    7.) deactivated and reactivated all NICs.

    I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

    Thank you

    Zack

    I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

  • Work wireless, but not Internet

    I use a WRT54G Router.  I am able to connect to my home network via the wireless but no Internet on any of my wireless devices.  It works only via Ethernet.  The firmware version is v3.01.3.  Any ideas what I did wrong?

    Hi mullahraheil, to properly isolate the problem, try changing the name of the network wireless and communication channels. Try the channels 11,9,3 or 1. Try to reconnect. If the same persists, you need to maybe do a hard reset on the device and reinstall it from scratch.

    To make the correct reset, please press the reset button at the back of the router for 30 seconds when the unit is turned on. Unplug the unit. Reinstall everything from scratch. Hope that helps.

  • How can I turn off the error 'no internet connection '? I am on wireless and my internet connection is often intermittent.  This popup is really boring.

    How can I turn off the error 'no internet connection '? I am on wireless and my internet connection is often intermittent.  This popup is really boring.

    Thank you

    you have to start the application of office cc, at most, once every 30 days.  and if you have an annual subscription, simply start it once all the 91 days.

    so, in your cc preferences, uncheck "Start on login" and close it.

  • Windows 7 - connected to wireless but no Internet access

    I understand that this has been asked before and there are many "solutions" posted on different forums that are not relevant to my problem or simply do not work.

    A few weeks back, I was on vacation, my daughter called to ask if I had cut the internet router and BT Hub as she was not able to connect to the internet. It had been fine the day before. I didn't and I couldn't do a lot the lot so said I would sort when I got home.

    I just spent the better part of a week trying to access the internet on his laptop, a Toshiba running Windows 7. I know that the internet and wireless works perfectly as his cell phone is sitting right next to my Sony Vaio running Windows 8. Also, my Sky TV, Kindle, Iphone and iPad to my wife connect seamlessly. It would seem that the possible culprit is a Windows Update which took place on 31 August. I tried to go back to her but she was advised by a friend to uninstall the update and she tried to make a file at the same time and now the reversion will not work.

    When the laptop starts up, until I connect, there is a dialog box indicating a wireless connection and correct network is listed.

    However, after I connected, even if the wireless connection is still showing as a good signal and 'Connected', it is currently connected to: section shows network not identified; No Internet access.

    I ran the gamut of the instructions in uninstalling/reinstalling the drivers of network, playing with the settings of Virtual WiFi miniport and almost everything that is proposed on the other forums but not luck so far.

    All I know is that someone will want to see the command ipconfig/all results so here they are. I removed the spaces in line to get them on a single page.

    Short using 'rebuild the hard drive' Toshiba, I am now at a loss to know what to do. I would also like to know WHY this happened and how it could be avoided in the future.

    Any constructive help appreciated.  Thanks in advance.

    WINDOWS 7: CONNECTED WI - FI NETWORK, but 'no INTERNET '.

    Solution:

    Start > search, then type "services.msc", click on "services": "

    in "extended", make sure that "DHCP Client" is the "road". Then click on 'standard' of a window, make sure that 'Internet connection sharing (ics)' is not 'disabled '. If this is the case, then click on it. In the "General" window, search for "Startup type", it through «Automatic (...)»

  • Z500 connected wireless but no internet

    I recently moved to a new country house. My Lenovo Z500 worked perfectly in my old House for 2 years. In my new home, my laptop connects to the router wireless (Netgear) but unable to connect to the internet. My other devices (tablets, smartphones) are connected and have no problem. I tried many of the suggestions I found on this site, but nothing helped. The troubleshooting says "your computer seems to be configured correctly, but the device or resource (DNS server) does not. My Lenovo Z500 is pretty useless now, please help! Thank you.

    problem solved: changed the DNS settings in ipv4 to automatic.

  • Connected wireless but no internet access

    I recently bought a used laptop and cannot get wirelless internet access. Its a HP Pavilion and I am able to access the internet if I use the LAN, but not via the wireless connection. He says that I'm connected to my wireless network, but when I try to open IE, there is no internet access. I tried to fix it and I get an error that there is always a problem. I have reset the modem and disabled my firewall. Any other suggestions? I am running Vista. Thank you!

    Hello

    Method 1:

    Follow the steps in troubleshooting from the link and check if that helps.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 2:

    Also refer to this article and check if it helps:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    See also: Wired and wireless in Windows network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Can connect to wireless but no internet server

    On some, but not all, wireless networks, I can connect to the server, but not to the internet.  I have a Windows Vista Toshiba laptop.  I also have problems with a runtime dll error that I can't fix.  It could be related?  Does anyone know how to fix a problem?  It doesn't seem to be a mistake Winsock from what I can tell.  When I go to the network and sharing Center, the small map shows that I am connected to the network, but there is a big red x on the connection to the internet.  When I click on diagnose and repair, he says: it can not solve the problem.  My daughter has an identical computer and no connection problem.

    Hi montzingo,

    1. what the network installation?
    2. When you receive the rundll error message?

    Method 1

    Check if Device Manager wireless network adapter works properly or needs an update.

    1. Open Device Manager by clicking the Start button, click Control Panel
    2. Click on system and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Method 2

    In many cases, the security software installed on the computer create conflicts between connections, I would suggest that you disable the security software on the computer and check if it works.
    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3

    Updated the driver for wireless network for the last card by visiting the website of its manufacturer.

    The problems of Internet connection
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Wireless internet is connected but no internet connection.

    I used Idea_gprs to the Internet on my mobile galaxy s2. But when I attached mobile with my laptop via wifi hotspot mobile it shows yellow mark means no internet connection. I also have the laptop computer on the same BSNL broadband connection. Connection high speed works fine but I cannot attach my laptop to the pc.

    Windows IP configuration
    Name of the host...: my PC
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: local.lan
    Wireless network connection Wireless LAN adapter:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Qualcomm, Atheros AR9285 802.11b/g/n WiFi
    Adapter
    Physical address.... : 74-DE-2B-A8-21-77
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. : local.lan
    Description...: Realtek PCIe GBE Family Controller
    Physical address.... : E4-11-5B-F7-58-21
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::9c6f:c68b:7099:bf7% 11 (Preferred)
    IPv4 address: 192.168.1.2 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Tuesday, November 27, 2012 23:03
    End of the lease...: Wednesday, November 28, 2012 11:03
    ... Default gateway. : fe80::225:5eff:fe61:97bc % 11
    192.168.1.1
    DHCP server...: 192.168.1.1.
    DNS servers...: 192.168.1.1.
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter ISATAP.local.LAN:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. : local.lan
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card adapt 6TO4 tunnel:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Teredo Tunneling Pseudo-Interface:
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address...: d 2001:0:9 38: 6ab8:1842:579:3f57:fefd (preferred
    EXEs)
    Address IPv6 local link...: fe80::1842:579:3f57:fefd % 13 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled
    Tunnel adapter isatap. {A6912753-123B-462F-A80B-6E43DFDCE741}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Reusable Microsoft 6To4 tunnel map:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...
    . : Microsoft 6to4 adapt #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 15:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 adapt #3
    Physical address.... : 00-00-00-00-00-00-00-E0
    Active DHCP...
    . : No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 16:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: #4 Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 17:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: #5 Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 18:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: #6 Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    So my question is how I connect to the internet by using the galaxy s2 on my laptop.

    Hi Vinod,

    The question you posted would be better suited in the Sumsung Forums. I would recommend posting your query in the TechNet Forums.

    Sumsung Support Forum

     

    http://www.Samsung.com/Levant/consumer/mobile-phones/mobile-phones/smart-phones/gt-I9100LKADAM-supportforward

     

    http://www.Samsung.com/Levant/support/troubleshootingguides/supportTroubleShootingGuidesMain.do

    Hope this information helps.

  • WiFi signal but no internet connection

    I'm at a University in Tianjin, China and having a laptop with Windows 8 Ansus. I have a wifi router and a cable and had internet connection in this place in the past. I have reset the modem to create my network and password.

    I see my network identified by the computer but it says 'Limited', and there is no internet connection. I'm sure it's not not to do with the settings on my computer, and I had someone else to confirm. I have a connection when I go into a classroom and find their signal.

    What could cause the problem? How can you have a wifi signal but no internet? I invited people to ask the technicians at the school, but nothing has changed. Would it be a they forgot to press the button or something? There is no internet to the block of flats I live but the other parts of the school have.

    Just trying to understand.

    Stephen Hoare-Vance.

    Greetings

    The technician of the College gave us a different IP address for the connection. I guess that our block has a separate IP address of other blocks. Apparently the number after the third point is variable; a number any scope is ok. I couldn't communicate avec.115 but can avec.98

    I don't know why they changed, but the problem is solved, thank you.

    I also learned that when the router is enabled it will connect to the computer and display a signal, even if there is no connection to the internet.

  • Compaq Presario C776CA connects wireless but no internet

    Compaq Presario C776CA Notebook PC

    Never had a problem until we changed our internet provider... now, he cannot get a wireless internet connection. If I plug the ethernet cable, it works very well. We have a 2 other laptops in the apartment that all connect to the wireless very well (if it's relevant, one is a mac book and the other is a computer laptop gateway).

    I tried all troubleshooting stuff and nothing works. I tested haven-t, but I do not know the laptop would be still not connect to other wireless connections, but not this one. WHY and how to fix it?

    This is the error I get on Google chrome: (sorry, in French)

    Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the DNS server address.

    Help, please?

    Hello:

    If you have a network Atheros wireless card in your laptop, see if the latest driver solves the problem.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

    Paul

  • 21 Pro slate - Gets the IP address but no Internet connectivity

    Hi all

    I have a slate of 21 Pro with no internet connectivity at home.  The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:

    * Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem

    * Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy

    * Switch 24 port managed gigabit Netgear

    I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.

    (OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).

    I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.

    I'm puzzled. Any ideas?

    Thank you
    Steve

    UPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.

    Weird!

  • I can connect to the router but no internet connect windows 8

    I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

    Hello

    Check with HP Support, their online documentation and drivers, diagnostics,
    and ask questions in the forums about known problems.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ===============================================

    Note the use of Win Key + X and Win Key + W (to access control panel, run,
    and settings according to needs). Win + D key calls to the office and use
    Win Key activates / deactivates the desktop and start screen.

    --------------------------------------------------------------

    Control Panel - Network and sharing Center - solve problems

    References to Vista also apply to Windows 7 and Windows 8.

    Your router be guess here, you have successfully updated the firmware a possible
    solution? And I would update your WiFi drivers on computers. How far away are they
    you have set in the router? Are there obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click
    top - tab of the driver - write version - click on update driver (can't do
    nothing that MS is far behind the certification of drivers). Then right click on the Wifi
    Device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
    This section-> update the NIC driver).
    http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

    Drivers and Microsoft - Windows 8 - Hardware
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Microsoft - Windows 8 - why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Microsoft - Windows 8 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system Maker you can see the same device manufacturer
    more recent versions. (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other update
    Drivers Windows 8 like updated drivers.

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - set up a new connection or network

    -----------------------------------------------------

    And:

    TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
    http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

    Microsoft - Windows 8 - Web & Networking
    http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

    Microsoft - Windows 8 - Wi - Fi & Networking
    http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

    -----------------------------------------------------

    Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Microsoft - Windows 8 - wired and wireless in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • NB100 - see network wireless, but unable to connect

    My girlfriend has removed the Atheros driver on his NB100. I just reinstalled the driver of this forum and the wireless icon is back in the lower right. I however still unable to connect to wireless internet and am use to operate the wireframe.
    Free configuration can see the wireless network but will not connect and windows said: there is none in the range.

    Help, please!

    Hi ig88uk,

    Please check the contents of the forum on the problems of WIFI. You will find hundreds of questions and I think that already is written here in the forum.

    I searched a little and founded this:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49920&TSTART=50
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51858&TSTART=0

Maybe you are looking for

  • anonymox took my firefox browser and I cannot get rid of it!

    I installed anonymox to see what he did. It slowed my system down incredibly and so after half an hour to try yo download AMD drivers for my graphics card, I decided that anonymox should go. It was when I discovered that he had taken over my browser

  • Massive memory leak Safari

    Since the installation of OSX v10.11.5 my Safari has developed a massive leak, making it unusable. I can look in the activity monitor the RAM is typed, then passing slot, making me have to force quit Safari, whenever it is open. Everyone knows this?

  • Unable to respond to emails

    I am unable to respond to emails.  When I hit the reply button, an email arrives, but it is locked.  It appears, but there is nothing in the address line and I can't add information to any location in the email.  At this point, it crashes then the wh

  • Conversion table of varying Dynamics

    I tried to convert a number of 2D, dynamically assigned tables to VARIANTS in order to generate a plot of parametric Surface 3D ActiveX.   Unfortunately, the CA_VariantSet2DArray function has problems with this.  If I understand the question, a trans

  • Install Windows 7 on hp envy 4 1103tx preinstalled win8

    Hello I'm trying to install Windows 7 Ultimate via the USB port on my HP envy 4 1103tx and remove preinstalled Win8. I disable secure and tried legacy startup startup. But Windows 7 Setup does not detect my HARD drive, it dosent show me any HARD driv