WRT54g not allowing not to wireless

Similar Questions

• Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft. Please notify.

  Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft.

  My Toshiba Laptop Windows XP Media Center OS is currently being updated with the exception of a point to update MS Office 2003 #KB949074

  has no size to him.

  Please notify.

  Kind regards

  Adolph Moret

  A call back to Epson says my Windows Firewall blocks printing Epson Status Monitor and by disabling the firewall every thing returns to normal.  Turning on the firewall without exception is still no difference and I should contact Microsoft for that matter.

  If the application works when the firewall is disabled, but not when the firewall is turned on, so you must create an exception for the application.

  I don't know what you mean by "turning on the firewall without exceptions still makes no difference" - no difference of what?

  You must determine the name of print Epson Status Monitor, then go to control panel > Windows Firewall (if your control panel is using "Category view", you will find Windows Firewall in the Security Center).

  Once in the Firewall dialog box, click the Exceptions tab, click the button "Add a program" and find printing Epson Status Monitor.  If it is not in the list that appears, click on the button "Browse".  After selecting the program and click OK, make sure that on the general tab of the Firewall properties dialog box that the "do not allow the box exceptions" is NOT checked.

• DeskJet 3510 will not scan wireless on OS 10.9

  I have a 3510 Deskjet which worked fine wirelessly on my old Mac with Snow Leopard. I recently bought a new IMac with OS Mavericks 10.9.5. The printer will print wireless but not scan wireless. It will scan only with the attached USB cable. I uninstalled and reinstalled the latest version of the HP software. When I disconnect the USB it is said that the wireless connection cannot be found. I have reset the wireless connection, and it's good. What I'm missing here?

  Hey @hellis,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the scanning wireless problem you encounter on your Mac OS X 10.9.5 operating system with your HP Deskjet 3510 e-all-in-one printer. I understand that you have already uninstalled and reinstalled and tested via USB cable without success. Right now I'm going to guide you through some additional troubleshooting for this problem to scan wireless.

  Step 1: Uninstall the drivers and software:

  First of all, I will have you reset the printing system on your Mac computer. This will remove any printer of your printed folder and Scan, but does not uninstall printers. You must use other printers once the reset complete simply click on the (+) sign more to add than these other printers back into your Mac. Make sure they are connected via a connection by USB cable or network. Do not add your Deskjet still back in.

  Please click here to know how to reset the printing system. Just follow the steps to "reset the printing in OS X Lion system"

  Once the reset is complete, please select: uninstalling the printer software and race through the steps in Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9 for the method that you used to install your printer.

  Once the printer is uninstalled, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  1. Please click here to download the latest drivers for your printer.
  2. Click on the download button
  3. Follow the steps on the screen to reinstall your printer.

  Once the reinstallation is completed, please make sure that your printer is added to your Mac with the appropriate driver. Avoid the Airprint driver because it allows that capacity print based and not scanning.

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scanand then check if the name of your printer appears in the list of Printers .

  3. If your printer is listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the sign minus (), then remove the printer. Once the printer is deleted, click the plus sign (), click Add a printer or a Scanner, click the name of your printer with Hello , like the kind.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu.

  5. click Add to add the printer to the list.

  Source: Install your HP printer driver and software for Mac OS X

  Once the printer is reinstalled successfully by using the correct driver, please test the printing and scanning functionality.

  Please let me know if the steps I have provided resolve your scan wireless problems. Good luck!

• PC not connect wireless to my brother 665 printer

  PC runnign windows 7 64 bit not connect wireless to my brother printer 665 cw. It allows to connect now, it won't. Running thorugh cradle Point router that says its connected.

  any help please.

  Hello

  Thanks for posting questions in the Microsoft Community. It seems that the computer does not connect to a wireless printer.

  In addition to answering these questions that would help us provide a better solution:

  1. what exactly happens when you try to connect to a wireless printer?

  2 have been updated printer drivers?

  3. were there any changes made to the computer before the question?

  Try these methods and check:

  Method 1:

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Try installing the latest drivers from the site Web of Brother MFC-665CW. Use this link:

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/DLF/download_top.html?reg=us&c=us_ot&lang=en&prod=mfc665cw_us_as

  a. click on the above link.

  b. Select the operating system. Click on search.

  c. download and install drivers and check:

  In addition, visit this link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• HP Deskjet 3050 all-in-One - scan wireless; DO NOT print wireless. Just moved.

  Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer.

  Help!  What Miss me?  Thank you!

  Moor_lady wrote: Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer. Help!  What Miss me?  Thank you!

  Hello Moor_lady, if you are using Windows 7, you can try to reset your printer wireless.

  Go to control panel of configuration, devices, and printer and in the menu bar above, select Add a printer in the lower option, select Add a network, wireless or Bluetooth printer.

  There should be another window that shows all available printers to be added. See if your wireless network printer can be found. If so, select this option and continue the process.

• 14 - r214tx: module not installed wireless, wireless adpater does not not even after reinstalling

  My laptop I have this problem of not being able to connect to a network wireless network.it keeps saying that there are no available connections when there is clearly a lot of available connections. I tried reinstalling all the drivers, and yet, it does not work. I contacted hp support and chatted with them and they suggested me to run a quick test of the ORGANIC system. I did and they said "not installed wireless module".anyone knows how to solve problems?

  Hello @Lincheng,

  Thanks for the quick response!

  If the problem is actually related to the WLAN Module, then using an external WLAN adapter should work.

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Computer will not print wireless or network

  original title: my computer is anti-social

  It will not print wireless or network with other computers in the House.  any advice?

  Hello

  1. what version of Windows is installed on the computer?

  2. were you able to print earlier?

  3. are you able to print via a wired connection?

  4. What is the brand and model of your printer?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Temporarily disable your antivirus software, and then print.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Check out the following link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• Since arriving in a new home, my printer wireless not working wireless

  Original title: prnter wireless Questions

  I have a wireless all-in-one lexmark x 4650 printer.  Currently, we moved and had to changed internet service providers and now my printer does not print wireless... what should I do to get the printer to pick up the new wireless network and wireless reprint?

  You will need to do the initial Setup again to tell the printer how to connect to your new wi - fi configuration.  Search in the manual.  You probably have to connect via a cable (USB?) to do the installation.

• keep getting dial ras in windows it can not conect wireless how to fix

  Keep ras dial in windows this on my netbook can not conect wireless how to fix or there at - there no virus program to do a scan of all the programs I checked is not compatible win this

  Hello

  I suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/159360

  Hope this information is useful.

• MX410 does not scan wireless using Mac

  Hello

  Recently, I was forced to create a new user on my Mac (OSX Yosemite), and since then the scanner on my MX410 does not work wireless. I get the message:

  Cannot scan for these reasons:

  -Scanning is off.

  USB - cable is disconnected.

  Please check and try again.

  Scanner driver will be closed.

  2.156.0

  If I change users for older users, it works very well. If I go into System Pref/Printers & Scanners/Scan/Open Scanner it scans very well wireless.

  Any suggestions or recommendations?

  Thank you

  Using Navigator MP EX or ImageCapture? If you use MP Navigator, make sure you check the settings on the new users to make sure that it is looking for the network version of the scanner.

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&SECU...

• HP Officejet 150: Can not scan wireless

  I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

  Hi @Dragonbebe,

  Welcome to the HP Forums!

  I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

  This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Why should I get driver USB adapter 802.11 wireless b/g if I do not use wireless controls?

  Why should I get driver USB adapter 802.11 wireless b/g if I do not use wireless controls? Looks like it would be easier for someone else to spy on your computer.

  Then don't use it. Leave it or uninstall it...

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Laptop will NOT connect wireless, my drivers ARE up to date

  My Windows Vista laptop, USED to connect to my router wireless very well. Now it won't, it doesn't even recognize that a network is available. I looked for answers and have updated all my drivers on windows suggested and still not connect wireless. My blackberry to connect to my router very well... Help, please!

  Hello

  Turn off the router and the Modem - wait 3 minutes and reverse. Restart the computer.

  Some systems have a power switch on the front or side. If a laptp or a PC that uses embedded
  WiFi check/configuration settings (BIOS/CMOS) as you start - often F2 then warning screen - select-
  boar without wireless/WiFi. If the PC of a kitchen separated and system maps turned OFF and try to remove and
  replacement of the card - in fact remove - do not just tight.

  A manual update or re - stall your drivers by using these methods, do not use only the driver update as
  You must refresh the batteries of any driver.

  Actually try updating your driver and disabling the network logon. Use a wire or download drivers
  on another computer and use removable media to transfer to your system.
   
  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.