WRT54G Setup for internet access using Lacie Network Space Max

Similar Questions

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• No Internet access on wireless network

  My HP desktop computer that uses Windows 7 Home Premium 64 - bit has been working well when out of the blue, I can't connect to the internet.  I can connect to the wireless network, but then he said: no internet access in most of the time.  When I go to solve network connections, it will either say "the default gateway is not available" is fixed and sometimes "connection is broken" detected, not fixed.  Sometimes it will say no problem.  I can not load a web page or download anything (although I can connect sometimes but at a very low speed and it does not last more than 30 seconds or so).  There are two other computers that use the wireless network and they both experience no problem.  I tried the Mode safe mode with networking, a clean boot, uninstalled my antivirus, tried to use IE and Firefox at each stage, and a few solutions that I found online without success.  Help, please

  Hi Steven,

  1 did you do changes on the computer before the show?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Windows 7 starter, no internet access, WPA2 Enterprise Network

  I use an Asus EeePC for the first time to work.  I replace my ibook apple that I had no problem with in the past. I entered the correct name for the network.  has selected WPA2-Enterprise, AES encriptación.  Using the PEAP authentication.  After entering my user domain\username and password, I connect to the network, but when I look at the network he says no internet access.  I can see my internal network and the computers.

  Any advice would be greatly appreciated.

  Thank you

  Hi Kbpipes,

  First check the edition of Windows 7 installed on your computer, since you mentioned that you use the Windows 7 starter edition. Windows 7 starter edition will not be able to join the domain network. To join the domain network, you will need to install either Windows 7 Professional, ultimate edition.

  Access the link below to learn more about the field of Assembly.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/domain-join

  To verify which edition of Windows 7 is installed on your computer, follow the steps below.

  1. Click Start.
  2. Right-click on computer and click Properties.
  3. Check the information on your computer.

  However, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

  Access the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also try to temporarily disable the security software of the computer and try to connect to the Internet. If you are able to connect to the Internet, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Also, you can try to start the computer in safe mode with network and check if you can connect to the Internet. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  You can also contact your network administrator and check if there are settings that must be changed or configured to access the Internet.

  Post back with the above information and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• Internet access using Personal Hotspot

  Hello

  I can't get my laptop to connect to my personal hotspot of the iPhone 4. The iphone appears on the list of available networks. My laptop is a Dell N311Z model. The connection works with an iPad.

  Is the personal hotspot that is able to provide an internet connection for my laptop or is there a better option where there is no wifi.

  Thank you

  Al

  Hi Alan,

  I understand that you have problems with the Internet connection using iPhone hotspot.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the exact full error message you receive when you try to connect?

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Method 1: Run the network troubleshooter utility.
  

  Refer to this link:
  http://Windows.Microsoft.com/en-in/Windows7/using-the-network-troubleshooter-in-Windows-7

  If the method above does not work, proceed to the next method.

  Method 2:

  a. clear Personal Hotspot.

  b. changing the password of your Wi - Fi password.

  c. on your computer, open the network and sharing Center.

  d. click on manage wireless networks.

  e. remove your iPhone network connection.

  f. once the instructions above are made, reactivate your personal hotspot.

  (g) on your computer, go to the list of network and connect to your iPhone using the updated password and check.

  Also refer to this link: wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you have additional problems, please reply to this post and we will be happy to help you further.

• setting up my VM PC for Internet access

  HI -.

  I just downloaded the latest demo version of VMware Fusion, enabled with the serial number temporary supplied and installed XP Professional. The platform is a relatively new Mac Mini running the current operating system. My Internet access is through a DSL modem/router which requires a system of client and enter a serial number from 10 numbers as a key.

  I don't seem to have access to the Internet on my PC of VM. I'm pretty new to do something meaningful on Windows; can someone tell me how to configure it to access the Internet? I just need to be headed in the right direction; I am sure that I have all the configuration information that I need.

  Thank you.

  mzimmers wrote:

  upgrading to SP2, and SP3 instead of directly to SP3.

  I would never install SP2 on a clean install if SP3 was the ultimate goal that it is a waste of time and I will not talk about other things.

  You should look into creating a slipstreamed SP3 for future facilities .iso image.

  Take a look at: Slipstreaming Windows XP with Service Pack 3 (SP3)

  Do you want to get this test anyway? I don't know what he's going to tell us now, because I don't have a virtual machine without Internet access.

  No, it is not necessary since you have Internet connectivity in Windows XP.

• Try a laptop through a desktop computer wireless network. Office uses a USB plug for internet access.

  I would like to access wireless internet on a laptop (XP; Atheros 802. 11 b / g) with a desktop computer (Win64) that currently, I connect to the internet using a broadband USB connect the device (AT & T USB Mercury).  How can I build a local network of the desktop that I'll be able to connect in the House with the laptop?  Are there restrictions and limitations when using this type of internet connectivity vs a wired version?  (Because of where we live there is no availability ADSL or cable, just wireless).

  Hi Mseibolt,

  Thanks for posting. From your post, it seems you are trying to send a signal from your desktop to your laptop using a wireless signal wireless. It is here that I don't see where you have any broadcasting wireless signal from your desktop. If this is the case, then the current senerio would not possible to establish ICS and have it function to your laptop.

  I hope this helps. Please let me know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WCG200 & WRT54GS together for internet configuration problems

  OK I wil l provide as much information as I can here. First of all, the problem is that until the other day I've used DSL and now switched to comcast cable.  As such, I went and bought the wcg200 cable modem only to find out that there seems to be problem there with the firmware wireless.  Before buying the wcg200, I still have a wireles g Linksys WRT54GS.  Now, I just want to use the modem cable as an internet modem and continue to access everything I got via the 54gs wireless router and cannot find out how to configure the 54gs.

  Here is the TRICK so far.  When I restart my computer my default gateway is 192.168.1.1, which is the 54gs and I don't get any INTERNET CONNECTION.

  If I have enough IPCONFIG RENEW it switches to 192.168.1.2, and I get INTERNET & life is the way it has been.  Power down the pc and the re-boot and I'm back to 1.1.  Please don't tell me that I have create a .bat file to include in the boot to release and renew.  I'm sure it's a setting somewhere on the 54gs to have this work wireless, but use the wcg200 gateway.

  The cables are as follows:

  -patch cable cat5 wcg200 port 1 to port 1 on 54gs

  -wire cable from my computer to port 1 of 54gs until I can get this to work.

  -I can ping 192.168.1.1 which is 54gs & 192.168.1.2 = wcg200

  Currently on the wcg200:

  -DHCP is on

  -IP address is 192.168.1.2

  -IP from de.1.100 for 50

  -Wireless is disabled

  -Everything is disabled except for the firewall, multicast and porscans, these are the default values for security.

  -Everythign else is default

  -upnp disabled

  -firmware is 2.0.3.5.10 - 0425

  ON THE WRT54GS

  -J' deleted the PPPoe configuration.

  -IP address is 192.168.1.1

  -DHCP is also on (it can not be good)

  -wireless is on with - wep

  -block the anonymouse applications internet is on

  -multicast filter is on

  -filter idnet port 113 is on

  -upnp enabled

  THX

  Snowman777

  Option 1: You still use the WCG200 gateway router and the WRT as simple access point. You almost have it. All you have to do is to disable the DHCP server on the WRT. Only the WCG is the gateway router and the DHCP server on the WCG gives correct gateway IP address. The WRT connects customers with wireless local area network. Internet settings on the WRT-related (e.g. the type of internet connection, filter, blocking, upnp, transfer/port triggering, etc.) are not all relevant because these functions have meaning only if the internet connection is connected to the internet port of the WRT. You probably want to disable the wireless in the WCG radio, if you don't want to use it.

  Option 2: Transform the WCG in a modem, or disable routing all and NAT. disable the DHCP server on the WCG. Then, on the Administration - Advanced page there is the option to turn off 'Routing and NAT '. This disables the functions of routing and makes the WCG in a standard modem. So disable Routing & NAT. You will lose the connection to the WCG.

  Now, you reconfigure the WRT: you open the web interface http://192.168.1.2/ enable the DHCP server (or better leave it turned on). Set the type of internet connection on automatic/DHCP. If you wish you can put the WRT default 192.168.1.1 IP address. Save the settings. Now, cable wires of the WCG in the internet port of the WRT. The WRT must now use the WCG as modem and gets his audience to the internet IP address of your ISP. You can check on the status of the WRT page. Now it should show an IP address instead of the 0.0.0.0 that you see if you connect the WRT by port 1 for the WCG. Make sure that your computers renewal DHCP IP address either by restarting or by entering "ipconfig / renew *" as an administrator in a command prompt window.

  That's all.

  A note: according to the manual of the WCG will be internal IP address 192.168.100.1. If you need to make changes on the WCG once again, you must either set up a static IP address on a computer inside the 192.168.100. * with the subnet mask 255.255.255.0 and connect the computer directly to the WCG or you simply press the reset of the WCG for 30 seconds to reset. Then the WCG is back to 192.168.0.1 with active DHCP server, i.e. you can connect a computer directly to the WCG, it gets a valid IP address to connect to the WCG and you can make changes again.

• can only connect to internet access using wireless or ethernet cable

  I use a computer Windows Vista with Internet Explorer 8.

  When I try to connect to the internet from my laptop on a Netgear router I can connect only with limited access via an ethernet cable or wireless. My computer detects and attempts to connect (with complete connection) to the netgear router, but then the prompt appears on the screen, "connection takes longer than usual." Then, it displays "connection failure.

  I tried to use all the recommended solutions such as move the computer to a different location, automatically get new ip settings, etc... without success.

  In the past, I could access the internet without problems and the full connection and wonder if my college internet connection may have screwed up the settings.

  Thank you

  Hi Travis98,

  You can try to boot into safe mode with network and check if the problem occurs.

  Step 1: to start in Mode safe mode with network you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information, you can consult the following link to start the mode safe mode with networking:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please post back and let us know the results.

  Hope the helps of information.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• must restart every day for internet access

  Every day for 4 days, I had to restart my Imac before I can access the internet, download my mail etc.  Once I do all works very well.  I am running OSX Yosemite 10.10.5.  I have my router (ATT) at the top of my list of preferred wifi.  Any suggestions?

  Thanks in advance.

  Try restarting/resetting the router.

  That shows Wireless Diagnostics?

  Wireless diagnosis

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• password not required for internet access

  Hi all

  We use BBSM 5.3 Server to control our Wi - Fi access point in meeting for comments so that they can access the internet, but in a box, users can access the internet without any password. I don't have an idea on the BBSM server could please guide where should I look to fix the problem.

  Concerning

  Eliane

  Also, here is a link to the 5.3 SP1 guide http://www.cisco.com/en/US/docs/net_mgmt/cisco_building_broadband_service_manager/5.3_service_pack_1/configuration/guide/configsp.html.

  Lee

• My wifi limited shows, no card wireless for internet access or access point problem

  Hi, I tried to connect with wifi, it shows connected but wrote 'limited' by the side. and below his writings no internet no access. I tried troubleshooting but it says wireless access point or no fixed adapter problem. can sum1 if you please help me with this problem

  Hi Dimma,

  What is the brand and model of your computer?

  This could be caused due to various reasons.

  -Due to the wireless router settings.

  -Due to the IP address.

  Follow the following troubleshooting methods:

  Method 1: I suggest you to reset the wireless router and check if this solves the problem manually.

  Consult the router's manual to know how to manually reset the router.

  Method 2: Reset TCP/IP and check if this solves the problem.

  Follow these steps:

  a. press the Windows key (start screen will popup), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the computer.

  
  

  Method 3: If you use WEP encryption change to WPA or WPA 2.

  Hope this helps and let us know if you need help. We will be happy to help you.

• On iPad 3 no wifi connection page don't pop up for internet access

  Since iOS 9.3.4 update for my iPad 3, the login page popup usual to connect to the internet to Starbuck, Panera or in local medical facilities does not come to the top.  No problem with the wifi at home or a facility that does not require you to click "agree."

  Please take a look at problems joining the Wi - Fi networks that require the display of a redirect page in iOS 8.1.2? Check your settings in "AutoConnect". This could be your problem. The update may have changed this logic.