WRT54G2 wireless router disconnects randomly

Similar Questions

• WRT54G2 - wireless router does NOT work well cable IS

  What can I do about it?  Just buy a new one? I had a friend coming geek and he said something burned where he SPOKE.  Can someone offer any other explanation as to why wireless should be pickin the signal

  As you are able to go online from your wired computer, you can connect to the Setup page of the router from your computer by cable and make the changes on the part of your router wireless.

  When you connect to the router interface, click on the Wireless tab, below, you will need to select the Option "Manual Configuration", then change the SSID of a wireless network in your name name and below changes the 11 wireless channel and let the SSID broadcast should be enable, then click on save settings... Once you return to the page, and then you click the sub-tab "Wireless Security" and change the WPA personal security and in the Sharedkey or Passpharase enter your security key and click on save settings...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect... If you are still unable to locate your wireless network, then I think that you need to update the firmware on your router...

  Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router... In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re - configure all settings of your router, check here if you are able to locate your wireless network, if yes, then try to connect. Once connected to the verification of wireless network if you are able to go online.

• Wireless network disconnected randomly without reason on Windows 7

  I just bought a HP with Windows 7 computer.  I was able to set up a wireless network, but every now and then, it stops just work.  I have a Belkin Wireless N Router and an Atheros AR9285 802.11b/g/n WiFi Adapter.  It's as if it will work for awhile... then just completely stop without reason.  I have check the router and it shows the computer is always connected and there always have an Internet connection, but I had neither on my laptop.

  Have you tested with Windows Firewall disabled?  If you have third-party firewall, turn that off as well and test.

  I had the same problem and it was my Kaspersky Firewall that kept abandon the connection.

• Wireless network disconnects randomly

  Original title: Windown 7, guard disconnect the dsl modem, can only connect after a system restore function, which causes this failure?

  For several weeks, Windows 7 keeps disconnect to the ADSL modem.  Canconnect only after a system restore function.  What causes this failure?

  Hello

  1 have had any changes made on the computer before the show?
  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:
  I suggest you try the procedure described in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you can try to reset the Internet Protocol.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Hope this information is useful.

• random disconnections for my wrt54g2 V1 router

  This had happened for a few months and I didn't really mind until it disconnects worsen.

  usually, when I turn on the router and started using the internet, it randomly disconnects once. My Wireless SSID will disappear and loss of the connection. and no matter how I update the SSID will not yet be released.

  the only way to regain internet access is to re - feeding on the router, if the SSID will be broadcast again.

  My wrt54g2 V1 router had recently upgraded to the latest firmware version, 1.0.04)is.  but still disconnects as usual.

  However the disconnects happen only once, after u re - turn on the router, you will not cut again.

  but after turning off my laptop and use it again a few hours later, the same thing happens again, a random disconnection and got to re - feeding on the router...

  can someone help me on how to stop the disconnection of the router?

  Thank you.

  Kind regards

  Leon

  Try the following settings as well as in the router for wireless connectivity:

  # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Click on wireless tab select the channel wireless at 6, 9 and 11. Click on save settings.

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then reconnect to the wireless network and then check the connectivity status...

• Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

  This problem occurred for the last 2 weeks whenever I use Firefox on each of the 2 PC's I use it every day. The problem may occur a few minutes after the start of Firefox, or it may be hours of continuous use before the connection is lost. It's okay if I'm in Firefox by itself or have the background applications running, but without a doubt requires Firefox runs before I see a problem.

  Configuration: WIN 8.1 and VISTA 64. the two latest updates.
  LAN: cable modem and Belkin wireless router; together with the latest firmware.
  Firefox v37.0.1 without add-ins or modules. Start page is 'empty '.

  Symptoms:
  Status bar Windows shows that I'm disconnected from the router.
  Router and the modem status LED shows that I am connected to the internet. Same thing for the VICTORY of the network status app. It shows no connection to router.

  The problem can be temporarily fixed by power cycling the router. Or, in the meantime just a random delay the connection may (or may not) be restored on its own.

  I also use a standalone PC application that streams the text given in short bursts and runs all day (no video or music... just short lines of text) with no problems until I launch Firefox in the background. Then he can go a few hours before the connection to the router is lost. I also often watch videos on my Tablet without the router problems. While typing in this issue on a PC I was disconnected from my router. I'm hoping to get some suggestions as to what to inspect or modify. Thank you!

  Fred, I had to leave the House early this morning and had no time to dig a cable long enough to reach my modem to try your suggestion. But, what I did was half of your suggestion. I pushed the reset bit recessed on the modem and left the House around 08:30 with Firefox running on both computers. Seven hours later everything is normal. No router disconnects and I gave a very good workout system.

  I have also now initial notice that connects to the web sites are faster.

  It is obviously a logical explanation for what was going on, but to an outside observer (), I see absolutely no logical link to the 'solution' for the rest of the universe. I won't lose sleep on. And I'm going to ask you more specifically when the next puzzle problem occurs! Thank you, Fred!

• Wireless disconnects randomly on my laptop.

  I have a Dell laptop purchased in 2006. He has XP with SP3. I have a wireless network set up at my house so that I can wireless internet access anywhere in it. When you use my laptop, sometimes, I'll be on a Web site and the following I try to go does not load, and then it will say that the page is not found because I lost the connection. At this point, I can disconnect from the network and then reconnect to it and the internet works perfectly until the next time that this happens. No other laptops or devices home lose the connection like this. I found some suggestions online to disable wireless zero, and I tried for a while. When I did this, at random times just as before, a different symbol wireless jump upward in the task bar (Intel ProWireless I think) telling me that she had lost the connection. With off WZ, I can't look for a network, so I can not disconnect and reconnect. A few minutes later, he will return to full power. This happens often and completely at random, as he has done before. There is another feature I should enable or disable? I have all kinds of specifications, but I don't know who to post. Help, please!

  Hello

  Go to the properties of the network card WIRED on the power management tab, uncheck the box "allow the computer to turn off this device to save power".

  The cause of this is the Wireless Zero Configuration (WZC) service. This feature, enabled by default in Windows XP Service Pack 3, is designed to optimize the use of wireless network technology in constantly looking for other wireless networks. This process has been known to cause clients to randomly drop their Wi - Fi connection. The best method to alleviate this problem is to use third party software to manage your wireless connection. This software will almost always receive with the driver for the wireless card you are using. Once you have this software installed, you want to disable the automatic configuration service to prevent it to load at startup.

  1. 'change advanced settings' in the wireless network connection dialog box
  2. in the tab "wireless", select the network and click Advanced.
  3. change a random setting
  4. click on OK and OK
  5. step 1 and 2 once again
  6. restore the random setting

  In addition, refer to this links:

  Random wireless network disconnect
  http://support.Microsoft.com/kb/910387/en-us

  Hope this helpful Information.

  Kind regards
  Tamim

• Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

  I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

  Hi Jack,

  Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

  Thanks again

  Greg

• PSC C4780 - connects to the wireless router, then disconnects, repeat...

  So I have a C4780 who knows a problem similar to what other people know about with different models.

  It seems that the printer cannot be connected to the router for more than 30 seconds.  I look at the screen of the printer and the intensity of the signal will be full one minute and gone the next minute.  Although full shell, I am able to connect to the Web site of the printer from my computer and print from my computer.  Whenever the signal goes, is my ability to communicate with him.  I use a Linksys WRK54G wireless router.   Also connected to it are my HP Pavilion dv7-1132nr laptop and my laptop Dell Inspiron 1545.  None of them lose connectivity to the router or the internet during this time.

  When I installed the printer, he gave me three errors.  He told me to unblock the following ports from my PC to my printer:

  UDP 427 @ 192.168.1.102

  TCP 9220 @ 169.254.21.72

  UDP 161 @ 169.254.21.72

  I tried in my firewall opening completely disabling the firewall.  No approach has worked.  I do believe however, that the problem is between my PC and the printer, but rather the router and the printer.  The printer doesn't keep in touch with the router or the router is not that the printer is connected to it.

  It's late and I have worked on throughout the day, including an hour and forty minutes on the phone with technical support.  If anyone can think of any I've left out (I know there are a lot), I will be happy to provide it.

  Thank you

  Kevin

  I've seen similar problems.  I have not found this problem completely, yet do not give you the "shotgun" perscription, but it is better than losing the use of the printer.

  The 169.254.x.y address is problematic for the driver software.  The following three things helped a lot other people.

  (1) give the printer a address static IP - one that sits on the right subnet (192.168.1.x)

  * You must enter your router AND the printer's IP address, if the router gives to someone else, and so the printer knows what it is.

  * I do not have the printer in front of me, model if you cannot figure it out, let me know and I'll find the instructions.  If you can not understand how to configure your router, I'll try to find a reference in the manual.

  (2) make sure that your computers have only a connection to your router.  If you're wired AND wireless to your router, it can be confusing network of driver code.

  3) go to your firewall and unlock things like Setup has loaded, but replace all references 169.254.x.y 192.168.1.102 (assuming that you give the printer the number 102 to step #1 above)

  That said, you may be right in your assertion that the problem is between the printer and the router.  Your description of the signal strength indicator is strange.  To what extent is your printer from the router?  How is that distance compares to other devices on your network?  There the walls or shelves between the router and the printer?

• NETWORK DISCONNECTS RANDOMLY, I READ EVERYTHING HERE AND NOTHING WORKS, PLEASE HELP ME! :(

  Lenovo G510
  Intel core i5 - 4210M
  Windows 7 ultimate
  Broadcom 802.11n network adapter

  For almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
  It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
  I had a lot of reading the forums on this topic and found nothing to work up to now
  That's what I tried:
  -everything is on maximum performance
  decliques-i 'allow the computer to turn off this device to save power ".
  -disabled some 'ip helper' in services
  -check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
  -verification of updates of drivers, it says I have the latest version
  -fully scanned the laptop for viruses and none has been detected
  n ' install any programs lately that could cause this
  -network, signall is excellent

  And still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
  If no help pleaseeee? I noticed that it happens to many other users also.

  If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.

  Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.

  Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.

• Wireless guard disconnection / expired. El Capitan 10.11.5 OSX

  Hello

  I would like to help on setting of the frequent expired connections that my mac experiences almost every 3 hours. It comes to take - we have two Mbit/s, used by me and other is my father. We also have four other devices connected to a wireless router and all but the impeccable work Mbps without any downtime. I noticed that almost every 3 hours, connections of the MEC are lacking. It shows on the top that its connected but nothing to really opens and after a few minutes that Safari puts the message the page cannot be displayed.

  I tried a number of approaches to solve this problem, but the problem still persists. Two of my windows devices work constantly without any disconnection, while only the Mac have a problem with my router. The diagnosis shows the connection is in healthy but its actually expired. I even deleted the connection of the Terminal settings and reset it but the thing timed out still exists. The router is Asus N10E and all my macs running the latest OSX.

  Have you tried to restart/reset the router?

  That shows Wireless Diagnostics?

  Wireless diagnosis

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• Mouse Bluetooth disconnects randomly the macbook pro

  So, I have a logitech bluetooth mouse (M535) and sometimes it disconnect random for my mac and then reconnect a few moments later... Is there a reason that this is happening, or is it possible to fix it?

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  Problems of Bluetooth wireless

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• ReadyNASOS 6.4.0 - T136 (beta 4) - network actions disconnect randomly

  After you have installed the latest beta version of ReadyNAS (T136) my network shares are randomly falling sporadically.

  Model: ReadyNAS 102

  SW: 6.4.0 T136 Beta 4

  Network connection: CAT6 Ethernet

  -Tired of changing the cables, always randomly disconnects

  -Tired another port on the router, always randomly disconnects

  Protocol: AFP

  Any suggestions? I'd be happy to send the log files. I am not versed in the Netgear ReadyNAS log files, so I haven't looked at them.

  Which firmware you would update go?

  What version of Mac OS X you are running?

  Yes, send logs (see newspapers of sending a link in my signature).

• wireless connection drops randomly

  Hello

  Last month I bought a new DV7-3128eg with windows 7 Home premium

  It has a Broadcom 43225 WLAN adapter

  my connection keeps away randomly

  -l' laptop is very close to the wireless router

  -l' event viewer doesn't watch any errors synchronized with the fall of connection

  -the wireless card driver is updated to the latest version 5.60.350.6 dated dated 22/03/2010

  -windows updates are turned on and that the OS is fully updated

  Please let me know if you have an idea to solve this problem

  the fall of connection takes place mainly during high internet usage (browsing, Skype video calls youtube,...)

  Thanks in advance

  Bouaké

  Finally, I read an article about my problem

  They said that the problem is in the 'Computer browser' service, which is used to keep compatibility with the old XP sharing scheme

  -J' disabled 'computer browser '.

  -order of the residential group as well

  and I am connected from 2 days without any problem in wireless connection

  Concerning

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database