WRT54GC Wireless questions

Similar Questions

• Re: Telstra 4G wireless question

  I recently installed Telstra 4 G wireless, shortyly after connecting the Telstra Manager disappears and only a clear white box remains thoughts

  Pease don t get me wrong, but this support Toshiba or Telstra?

  Specific questions contact Telstra support or phone support for Telstra.

• HP ENVY m6-1201tx Notebook PC - Bluetooth + Wireless questions

  Hi Experts! I recently installed a new copy of Microsoft Windows 8.1 (64 bit) in my HP ENVY m6-1201tx and figured out that most of the drivers listed in the Device Manager is unknown. So, I've updated my Windows via Windows update tool and has installed some hardware drivers;

  • RALink Bluetooth
  • PCI device (i.e., Realtek card reader, installed separately)
  • Unknown device

  Then, I downloaded all the latest drivers available and tried to install, but that a single driver worked perfectly IE Realtek card reader. Whereas, while drivers gave questions such as;

  Ralink Bluetooth: «.. . can be disconnected... Reinsert the material and restart. »

  Finger print driver: Installation went perfect, but does not work when I slide my finger.

  Some drivers have problems with Framework 2.0 and 3.0.

  And above all, my Wireless no longer works all of a sudden, then reconnect AP automatically within 10-15 sec. So frequently really bothers my downloads.

  I really need help to solve the problems mentioned above. Thank you for treating me like a NOOB.

  Kind regards

  Nadine of Muhammad.

  Try this to unknown:

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58423.exe

  Fingerprint reader:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58900.exe

  If the wireless drivers are properly installed and configured, it should work.

• WRT54GC wireless problem

  Hello world

  I have wireless router WRT54GC. Recently I bought an iPhone and because the phone could not connect very well to my wifi I have updated the firmware on the router to v.1.05.7 (I used the download link to the Linksys site). Now, the phone connects fine but my laptop cannot connect to the network via a Wi - fi. When I try to connect, I see the laptop acquires network address and he keeps trying for a few minutes. After that, I see a message 'little or no connection '.

  My office is connected to the router and have no problem. The iPhone's wi - fi connection and the router is OK. But there is no connection for the laptop.

  I took the cable from the desktop and put it on the laptop and I had Internet access by cable. I was trying just different options. When I'm home cable to connect wi - fi office and I tried the laptop, it was the same thing. No internet access from your laptop. Here, the strange thing for me is that I have wifi (I can connect to Internet via wifi from the iPhone) but I can't connect using the laptop. I suspect that it happened after the update to the new firmware of the router.

  Any ideas how I could possibly fix this are greatly appreciated.

  Thanks in advance.

  BL

  Technical information:

  1 computer that is connected to the router

  1 laptop

  Both computers are running Windows XP

  I found something. Safety/safe mode wireless I had put the WPA2 mixed mode (that is, the router has been use WPA + WPA2). I changed it to WPA with AES encryption and I finally logged

  Of course, there is a problem when the security mode is WPA2. I played around with the settings and found each time when the security mode implies WPA2 (even when it's just about WPA2, not mixed WPA + WPA2) the laptop cannot connect to Internet. I think it is an issue that must be resolved by Cisco.

  I had no such problem with the previous firmware. Pretty sure that came with 1.05.7.

  Thanks for the help, amine.

• adapter Wireless Question

  I have a Dell Dimension E520 with a Netgear WPN (TM) Wireless PCI array adapt

  I need to update and buy another. I have ultimate Time Warner cable 50mbps, but I get only around 15 Mbps of download speed test

  I am running Windows 7 64 bit

  My question is... Should which adapter I? model # and brand

  Best bang for the buck is 802.11 N USB based better antenna.  Relative speed depends also how far away you are and how many obstacles, are between you and the router.  You seem to be also confuse MEGABITS per second to MEGA BYTES per second, that is almost 10 x difference.  15 meg is the right speed. You are also faster than the slowest connections.  Nothing more 1.5 Meg in both directions is great for video streaming etc..  At 300K per second he starts stuttering and buffering and underneath, it stops, and then crashes every 25 seconds.

  http://www.Amazon.com/NETGEAR-n300-Wi-Fi-adapter-WNA3100/DP/B003G2Z1M6

  A more expensive 802.11 air conditioner will be no faster than if you spend $100 or more on a 802.11ac router.

• Satellite Pro A300 Wireless questions

  My 3 month old A300 Satellite Pro (Vista) disconnects every half hour from my wireless hub. To reconnect, I have to disable the wireless on the laptop and turn it on again then it reconnects.

  My partners that Dell remains connected all day, so it may not be a problem with the wireless network.

  Anyone has any ideas what would cause this. It runs on AC power.

  Is there a difference between yours and partners for laptop?
  Have both the same OS?
  That the two laptops use the same standard WLAN (a/b/g or n maybe)?
  You can test the WLAN connectivity with g only?

• ConfigFree - research on Tecra A3 wireless question

  Hi all

  I a laptop Tecra A3 with an installed integrated wireless card and works perfectly on wireless to router Dlink DI - 714 P + on my cable Telewest broadband connection.

  The problem is, when I try to run the
  Tool (Radar) wireless LAN serach, he informs me that the wireless device has been disabled and I need to set the switch on the front of the laptop.

  As I said, the connection and the hardware are all working well. The switch IS in the on position already, I use the link now, for posting this message.

  I tried to turn it off, and as expected, I lose all internet connectivity, so I turn it back on and voila, I'm online, but the tool still says it's off. Even the "doctor Conectivity" says that the switch is in the OFF position when it is not!

  Can someone help me to untangle what happened here please?

  Thank you very much

  Martin

  Hello

  Well, it's not easy to say why the ConfigFree utility gives you a wrong message.
  I found on the page of the Toshiba driver free V.5.00.45 of Config. Maybe you will solve this problem if you reinstall the utility. Trying to download the new version and install is again.

  Good bye

• Equium M50-216 wireless questions

  Hard drive reformatted a new weeks back.
  When the computer has restarted, no wireless network could be found.

  The problem seems to be the other portable wireless laptop in the household connect OK
  The wireless switch is in position 'works', but the orange light does not "lights".

  Is this a problem with the wireless driver?

  Someone at - it help him?

  Thank you

  Hello

  The wireless network card is recognized correctly in the Device Manager?
  If this isn't the case, then the WLan driver must be installed!

  Also, check if the WiFi network has been configured correctly.
  Means that you must check the type of encryption, password encryption, and firewall settings.

  Good luck

• EliteBook 8440p: Wireless questions

  I had to reinstalled Windows 7 Professional 32 bit on a friend's computer and now I can't connect to the internet with an ethernet cable or wireless.

  In the Device Manager and in the other devices section, these are the following devices/controllers that have a yellow triangle next to them...

  Base system device: PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14

  Ethernet controller: PCI VEN_8086 & DEV_10EA & SUBSYS_172A103C & REV_05

  Network controller: PCI\VEN8086 & DEV_4238 & SUBSYS_11118086 & REV35

  PCI Simple Communications controller: PCI VEN_8086 & DEV_3B64 & SUBSYS_172A103C & REV_06

  RICOH Bay8Controller: PCMCIA\RICOH-Bay8Controller-F1b2

  Unknown device: REV_0072 & USB\VID_138A & PID_0007

  Help, please! I don't know what to do with this information. I tried looking for the drivers, but I don't know what to look for. Thanks in advance

  -agnes

  Hello:

  Here are links to the drivers you need...

  System of base & Bay8Controller RICOH device:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_79317_2&swEnvOid=4053

  Ethernet controller:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_101142_1&swEnvOid=4053

  Network controller:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_108502_1&swEnvOid=4053

  PCI Simple Communications controller:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_118167_1&swEnvOid=4053

  Unknown device:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_134806_1&swEnvOid=4053

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• WRT310N v1 and MacBook Pro wireless questions

  Hi all

  I had problems with my v1 WRT310N current wireless. I have a macbook pro (early 2009) with mac os 10.5.8. I have cable internet, a DHCP connection. I have a computer and cable to the PS3 via the router, and they work perfectly. The wireless, has however never been what it should be. Internet load slow, even if the connection speed is quite good (not as fast as the devices wired, but close).

  Wireless settings are:

  wireless configuration: manual

  network mode: mixed (the Macbook can get wireless n by iPhone is just g)

  Radio band: standard 20 mhZ

  broad channel: 9 (cannot change this with this config, if I'm not wide channel at 40 mhZ)

  standard channel: 11

  SSID broadcast: enabled

  I've got security WPA2 with AES encryption. I defined the interval of tag to 75 and thresholds of Fragmentation and RTS on the left by default. The firewall is turned on, and "filter anonymous internet requests" is disabled. I wonder if I'm losing ground so by broadcasting a mixed signal, instead of just G or just N I tried to pass only Wireless-n, but there is no significant change (and the iPhone cannot connect at all).

  Any input at all would be really appreciated. I hope that I don't have to fork over $30 for linksys just to get technical support. Thanks in advance.

  AH! Finally got the bandwidth wireless at the height. The solution was, of course, the simplest available: move the router to a better location. Before that I had hidden in a corner near a window - probably sent most of the signal across the street. He now has a line of sight clear to each room. Assume that Occam's Razor is famous for a reason.

  Thanks for the help!

• X 51 wireless questions

  I just got a x 51 and for some reason I can't connect to wifi 5 g

  Help, please

  Yes indeed this wireless card does not support 5 GHz.

• Since arriving in a new home, my printer wireless not working wireless

  Original title: prnter wireless Questions

  I have a wireless all-in-one lexmark x 4650 printer.  Currently, we moved and had to changed internet service providers and now my printer does not print wireless... what should I do to get the printer to pick up the new wireless network and wireless reprint?

  You will need to do the initial Setup again to tell the printer how to connect to your new wi - fi configuration.  Search in the manual.  You probably have to connect via a cable (USB?) to do the installation.

• Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

  Hello

  I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

  I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

  Printing from laptop (connected wireless to the router) works perfectly.

  Thank you in advance for your answer, I'm really lost on this one.

  Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

  I'll try to manually add again in this way:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• connection lost of rMBP vs airport Time Capsule

  It gets more frustrating and I noticed that a number of users had similar problems so I wonder if I'm missing something. Here we go:

  • Time Capsule 2 TB with the 7.7.3 airport firmware
    • Connected to the router of Virgin Media fibre optic (WiFi disabled in the box of the Virgin)
  • rMBP end of 2015 with all the updates and new OSX

  All devices (2 x 2 x 1 x PS4, iPhones, iPads) seems to work very well. Apart from my MBP. What is going on?

  • WiFi a works very well.
  • All of a sudden nothing will load.
  • I can either wait a few minutes for the connection to continue or should I switch WiFi on & off and it works fine after that for another 15 minutes.
  • Keep in mind that the connection has not declined: he is always connected and showing all the bars.
  • It makes no difference where in the House, I the Capsule is not obstructed by anything.
  • .. .and only the MBP have these problems.
  • .. with this Capsule, .and everywhere else (work, Hotels, etc.) the MBP works seamlessly with other WiFi networks.

  Any ideas? I did the factory reset - it worked once for a few weeks and then it started happening again. He did not work during the last 10 factory reset.

  I assume that you are running the latest version of El Capo on your computer?

  Have you installed upgrading it above Yosemite when you got the computer or shortly after?

  There seems to be some DNS issues strange happening.

  Wireless with Mac Laptops later issues are well known on the longer thread in this area is wireless questions about Yosemite... maybe soon overtaken by problems wireless on El Capo.

  Re: OSX Yosemite Wifi issues

  Yosemite no wired or wireless network

  I think you have to look at the posts in the region for your operating system...

  Let me recommend a few changes... You've probably seen the posts before if you've been trawling for info.

  1 make sure IPv6 for wireless is set to the local link only on the computer.

  2. make sure that all the names are short, < 10 characters, no spaces and pure alphanumeric characters.

  3 password identical, but longer. 8 to 20 characters.

  4. use the google DNS values... so, go wireless in and under the DNS tab and set up google DNS. (Or change the configuration of TC to see below static IP)

  5 is the TC in bridge mode... (It probably should be plugged into a box of blank media)

  Try using Static IP method instead... which has improved things in my configuration.

  Re: time capsule Airport Guard disconnection