WRT54GL DHCP IP Active Table

Similar Questions

• Put the active table in respect of the development when the script was interrupted by a dialog box

  I adapted a script which browse tables in a file of Fm and asks the user if he wants the current to be reformatted or not active table

  I have not find a clean way to the table that is currently selected in the variable "tbl" or visible on the screen when the scripts sends a dialog box.

  The workaround I found is to launch a format on the table before sending the guest, in this case the table processing is apparent when the prompt arises.

  But I would like to have the visible table and avoid doing all the treatments on the table until the user has had a chance to respond to the prompt.

  I guess that there must be a method to draw the attention of the active window on an item that is selected in a variable?

  function ApplyTableFormat (doc)
  {
  If (doc.) ObjectValid())
  {
  var tbl is doc. SelectedTbl
  var tbltitle;
  var tblTextItem;
  While (tbl. ObjectValid())
  {
  tbltitle = "";
  tblTextItem = tbl. FirstPgf.GetText (Constants.FTI_String);
  for (var i = 0; i < tblTextItem.length; i ++)
  {
  tbltitle += tblTextItem [i] .sdata;
  }

  / * How my "tbl" visible in the window active doc? */
  If (Alert ("format:" + tbl.)) "Tbltitle + FirstPgf.PgfNumber + '? \nClick Cancel to abort. ((', Constants.FF_ALERT_CANCEL_DEFAULT))
  return;
  / * Insert here the table formatting code * /.

  TBL = tbl. NextTblInDoc;
  }
  }
  on the other
  {
  Alert ('no active doc', Constants.FF_ALERT_CONTINUE_WARN)
  return
  }
  }

  There is a document feature that allows to scroll the window to a location of particular text:

  doc. ScrollToText (textRange);

  You might be able to do something like this:

  doc. ScrollToText (new TextRange (tbl. TextLoc, tbl. TextLoc));

  -Rick

• Muse: message "records in the main.active table.

  Today, I got this message while he was trying to save my file of muse. "No record in the main.active table. Any help would be greatly appreciated.

  And my file will not be saved. I restarted my machine and now the file opens. How can I access this file?

  Thank you very much!

  Please send us the .muse file at [email protected] as well as a link to this topic. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.) Thank you.

  I have not seen a report of this error for more than a year and a half. I thought that we had eliminated any means to reach this State. You use 2014.2 Muse?

• no record in the main.active table?

  I just updated my Muse, made some changes to my site and saved. When recording, Muse crashed. Now when I try to open the site I get the message "cannot open this file in the Adobe Muse site. no record in the main.active table? I panic here a little... Please help. Thank you!

  The avalanche of reports of this error in November or in 2013 was due to a bug introduced in 7.0 Muse that has been fixed a week later under article 7.1. (The current Muse, 2015.0.1 equals Muse 12.1.)

  I am puzzled as to how this could happen while doing a backup, unless the file has been changed or renamed by someone else then only on the server? Or you were doing a save as (rather than a backup) over the original on the server?

  Could you send your file from MuseLog.txt to [email protected] as well as a link to this topic to the context? Can provide more information about what happened. Thank you.

• Best Index on a column with low cardinality on a high DML activity table?

  I wanted to ask a question about the indices? I have a table which is the main table in the my system it holds nearly 65 000-1000000 rows on any average day. Each line has a (mandatory) batch, it can be 6 different status which is held in the state table. The distribution of status id in the master table is shown below. There is no index on this column, it has a low cardinality, but there are many dml moves in this table. However the State is the main request, the report runs against, so it made a full table scan every time. Users run their applications via an interactive report on Apex 4.0 and it runs slowly. It seemed to be a lock on the $ wwv_FLOW_PREFERENCES caused by this slow execution of interactive report query in this table for and is it locking associated with a slow interactive report query?

  SELECT * from Main_Table where batch =: b2 A full table scan is done in this case. Distribution of status id in the main table 0.12% Reopened pending 1.01% Current 0.17% Pending 0.01% Closed not resolved 96,44% Closed 2.24% Open

  Database Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production PL/SQL Release 12.1.0.2.0 - Production CORE Production 12.1.0.2.0

  AMT for Linux: Version 12.1.0.2.0 - Production

  NLSRTL Version 12.1.0.2.0 - Production

  How about a LIST partition on batch column?

• Cannot open this file in the Adobe Muse site.  No record in the main.active table

  The title says it all.  Well well the error at least. I pulled some search terms in the error message and seem to have no luck through several search engines and of this forum.  HALP!
  Evelyn

  How the file last record? Where it has been stored? Was it ' Save As'ed ' on removable media that was then removed shortly after recording finished, perhaps without first be ejected from the operating system?

  This error indicates that the file is empty (all contents are gone). You will need to return on any backup copy you have. If the file is stored in a synced folder (e.g., Dropbox, Creative Cloud Files, GoogleDrive, Apple iDrive, MS a disk, etc.) these services generally provide access to all the old versions synchronized for a number of days.

• constraint - maximum one record has the status "active" in a table.

  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
  PL/SQL Release 10.2.0.5.0 - Production
  CORE Production 10.2.0.5.0
  AMT for Linux: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production
  
  I thank in advance. I have a table like this:
  
  
  CREATE THE TABLE FIFAPPS. FS_MST_SUPPLIER
  (
  SUPL_CODE VARCHAR2 (12-BYTE) NOT NULL,
  SUPL_STATUS VARCHAR2 (12 BYTES) BY DEFAULT 'ACTIVE' NOT NULL
  )
  
  How the constraint such that no more than a supl_code supl_status = 'ACTIVE' table.
  
  For example:
  
  -BELOW IS NOT CORRECT BECAUSE THERE ARE TWO RECORDS WITH SUPL_STATUS = 'ACTIVE '.
  sheet 1: (supl_code = '1', SUPL_STATUS = 'ACTIVE')
  sheet 2: (supl_code = '2', SUPL_STATUS = 'NON ACTIVE')
  record 3: (supl_code = '3', SUPL_STATUS = 'ACTIVE')
  
  -BELOW IS CORRECT BECAUSE IT IS THERE ONLY ONE RECORD WITH SUPL_STATUS = 'ACTIVE '.
  sheet 1: (supl_code = '1', SUPL_STATUS = 'ACTIVE')
  sheet 2: (supl_code = '2', SUPL_STATUS = 'NON ACTIVE')
  record 3: (supl_code = '3', SUPL_STATUS = 'NON ACTIVE')
  
  -BELOW IS CORRECT BECAUSE IT IS THERE HAS A RECORD WITH SUPL_STATUS = 'ACTIVE '.
  sheet 1: (supl_code = '1', SUPL_STATUS = 'NON ACTIVE')
  sheet 2: (supl_code = '2', SUPL_STATUS = 'NON ACTIVE')
  record 3: (supl_code = '3', SUPL_STATUS = 'NON ACTIVE')

  Hello

  Don't know what you're trying to achieve, but here's a way not to have a single file with the status "ACTIVE".

  CREATE TABLE FS_MST_SUPPLIER
  (
  SUPL_CODE VARCHAR2(12 BYTE) NOT NULL,
  SUPL_STATUS VARCHAR2(12 BYTE) DEFAULT 'ACTIVE' NOT NULL
  )
  
  insert into fs_mst_supplier VALUES(1,'ACTIVE');
  insert into fs_mst_supplier VALUES(2,'INACTIVE');
  insert into fs_mst_supplier VALUES(3,'INACTIVE');
  
  create unique index idx_fs on FS_MST_SUPPLIER(case when supl_status ='ACTIVE' then 'ACTIVE' else null end);
  
  insert into FS_MST_SUPPLIER values(4,'ACTIVE'); -- this would fail
  

• Display of the offsets in the columns of the Table activity

  Hello
  
  Is there a way to P6 to display the offset of the activity by the predecessor of conduct as a column in the activity table?

  as a given activity may have 2 or more driven predecessors, with different or lag, what exactly would you like the system to squeeze into a single 'conduct predecessor Lag relationship' if such a field is available to view in the activity table.

  try to use a report showing columns of activity as activity Id & name, Id reports & the predecessor name, drive, relationship Type & Lag, Free Float, with relationships that are filtered by drive = yes.

  I hope this helps. Kind regards.

• DHCP WRT160N problem

  My configuration as evidenced by the configuration-> Basic Setup screen is:

  • RouterIP
    • 192.168.1.1
  • DHCP
    • Activated
  • Start IP address
    • 192.168.1.2
  • Maximum number of users
    • 5
  • IP address range
    • 192.168.1.2-6

  What is the subnet mask on?

  -The value of the subnet mask 255.255.255.0

  -Put the Rage of 192.168.1.00 to 192.168.1.149 IP address

  Now, check if you can increase the number of user or not... Otherwise, reset the router for 5 seconds, and then reconfigure the router.

• How to add the WRT54GL network as AP

  I have an existing router with network, all computers have manually assigned IPs. Now, I want to add WRT54GL to serve visitors with the radio. For them to WRT54GL DHCP assign IPs in the range no other computer in LAN uses. I want that they have access to the internet and to the rest of the LAN.

  If I connect WRT54GL by WAN port they only access to internet, but can not see LAN.

  But if I connect via LAN, I can access LAN, but not the internet. It works, if I put the IP of the router (on WRT54GL on 192.168.100.1 but now he is in conflict with the main grave failure of router and network). I do not understand why wireless computers get WRT54GL IP as the gateway and not 192.168.100.1 as it is defined in the basic configuration.

  I guess I should do something in advanced routing, but which?

  You can try tomato or DD-WRT. Tomato, it's a little less 'crowded' that DD - WRT, but you can add options specific to the configuration of DNSMASQ (the DHCP server that works under Linux) that will specify a default gateway.

  If you decide to go to the tomato (which I am more familiar with more of dd - wrt), DNCP/DNS has a box in which you can set options of configuration of DNSMASQ. There is also a link on this page for a site that has great descriptions of DNSMASQ. This site ar options below:

  to set the default 192.168.4.4 route option, do -dhcp-option = 3, 192.168.4.4 or -dhcp-option = option: router, 192.168.4.4

• Change DHCP with control through web query

  I'm writing an initializer DMP to get all of our DMP correctly through a program Windows forms. The DPM is 4400G using version 5.2.1.

  I send you a number of orders, and they work with the exception to disable DHCP and set the IP address.

  The commands I send are:

  set_param? init. GWYN = 10.101.0.1 & init. DNS = 10.101.0.1 & init. IP = 10.101.0.87 & init. DHCP = OFF & MIB. Save = 1 & MNG. Reboot = 1

  The gateway and DNS are defined, but the DHCP protocol is still there. I tried to disable DHCP through the web interface and it works. I sent then simply the new IP address, but nothing has changed.

  I have reset to factory settings and restart it. I ran the unique controls with mib.save and pieces in different orders. Nothing changes.

  As I can't find any documentation of the MIB of 5.2.1 I ask your help.

  Bjoern,

  You are absolutely right. The DHCP protocol cannot be disabled using the MIB. 5.2 code network configuration is stored using a config file in the DMP, rather than the MIB (as if it were in 5.1). It took me two hours to understand, but here's the solution:

  Please use the hidden command: https://161.44.77.100:7777 / get_param? p = network. * to determine the configuration of the network

  It's my configuration before (output comes from the net.conf file in the DMP): DHCP is activated and assigned IP address is 161.44.77.100

  [eth0]
  DHCP = 1
  isUp = 1
  Domain = Cisco.com
  IP = 161.44.77.100
  mask = 255.255.255.0
  GWYN = 161.44.77.1
  DNS = 161.44.124.122 64.102.6.247 171.68.226.120

  https://161.44.77.100:7777/set_param?network.eth0.dhcp=0&network.eth0.ip=161.44.77.101&network.eth0.dns=161.44.124.123&network.eth0.mask=255.255.255.0&network.eth0.gwy=161.44.77.1&network.eth0.domain=test.me.com&mng.command=network.saveConfiguration&mib.save=1&mng.reboot=1

  [eth0]
  DHCP = 0
  isUp = 1
  Domain = test.me.com
  IP = 161.44.77.101
  mask = 255.255.255.0
  GWYN = 161.44.77.1
  DNS = 161.44.124.123

  For your particular case, the command should look like this:

  set_param? Network.eth0.GWY =10.101.0.1 &= network.eth0.dns10.101.0.1 &network.eth0.ip= 10.101.0.87 &network.eth0.dhcp= 0& mng .command = network.saveConfiguration & .save mib = 1 & mng .reboot = 1

  Let me know if you have any questions. I hope this helps. If your concern is addressed please mark this message as "answered".

  Kind regards

  Sagar Dhanrale

• DHCP installed on RV042

  We have a network with a router RV042 set. Router is connected to the Cox Cable and DSL ATT. Currently have 20 computers hooked up to the router all using static IP addresses. The installation program is in place for more than 7 years. I want to set up a wireless network access point. The problem is, I can't get DHCP to work right even WITHOUT the wireless access Point. I took one of the computers that works very well with a static IP address and this changed to be DHCP, I activated the DHCP on the router and the game of and through settings for the assignment of intellectual property. The computer will connect and obtain an IP address and it allows me to see all the INTERNAL servers on the network, but goes to the Internet of TRUE FEUILLETEE. I usually have to refresh them 5 or 6 times to get a web page and sometimes even don't work. If I get a next page it is about 10% chance that it will bring up a subpage of the page without doing a refresh 5 or 6 times. It's like he can't keep the connection to the Internet. I noticed something different in the manual of the RV042 which is different from all other Linksys routers, I worked with. It is said that when you enable the DHCP on the router, you can ensure that all THE computers hooked to it are set for DHCP. All other routers I've worked with that do NOT use that Word. Am I missing some setting or is it a binding thing where you're ALL static or DHCP ALL? Any direction would be greatly appreciated.

  Charles,

  Your presumption is correct about binding protocol.

  1. Have you tried Smart Backup link instead of the load balance to see if you get the same results?
  2. Also, have you tried setting the router to force a static IP based on MAC address? DNS (-> Setup)
  3. Make DNS servers in the game of router, static DNS servers on your PC?

• Changes to the network when the reconfiguration of the DHCP server to the static IP address

  I installed new positions of work on my network and had WDS push the image so we have installed DHCP to do this. After all the work stations were Setup, I started to change static IP DHCP on the workstations as we prefer to use static IP addresses.  Some computers work fine, some don't. The problem I have is when changing from a static IP, as active network passes the network of the area to the Public network. However, when it is configured to use DHCP, the active network is the domain network. What am I, I missing which will cause the active networks of change to public networks at the static IP change? I checked the settings ip IP, Subnet, DG and DNS and they seem correct. I tried to withdrawal, join. I tried the update NIC driver. I tried to uninstall the NETWORK adapter and reboot. If anyone has seen this before?

  Hi JFK @,.

  Thanks for posting your query in Microsoft Community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro/

• Admin tab using table design

  Hi all
  Previously, we used to have an option to create tables on the Admin tab.
  Sites 11.8 guide it says that the same has been shifted to management tools in the Admin tab.
  I can't see the management tools node, even if I am able to see the system tools and other nodes.

  I tried on 11.8 JSK and same is the case on our development environmemnt, which is 11.8.

  My user has all of the ACLs and the roles.

  I am able to create a table from the Explorer of Sites with the same user credentials.

  Do you have any suggestions as why I am unable to see the management tools option in the Admin tab?

  Hi Vikas,

  Management tools have been removed from the tab Admin, and some features (especially for the management of users) moved to different areas.

  You must use the Explorer Sites if you want to create non-active tables.

  Bug 17666184 of the documentation has been triggered for that.

  Kind regards

  Stephan.

• Network/DNS/DHCP issues with testlab - virtual network Editor is killing me!

  Hey all - a little new with workstation and have been messing around trying to get this to work for so long, I want to just set up my lab already but can't find the catch here.

  So, here is what I tried to do:

  Have a hand of Windows Server 2008 R2 (Controller/DHCP/DNS/Active Directory domain / IIS) addresses/leases DHCP of an internal network (which means, I want some Windows 7 Ultimate customers to assign IPs to the DC and NOT of VMWare offers integrated DHCP). I want clients to be able to use only one NIC (preferably) and both authenticate to AD and connect to the Internet (so I think I'll pass on DNS to resolve external domains?). I'm having a pretty hard time trying to understand what...

  My physical network is an active router Linksys with DHCP, so them to assign an IP address to the PC that I'm looking for this laboratory-perhaps it is a problem as well and must also be configured or have my VMNet reflecting?

  I tried to use NAT, a bridge connection, etc... and even then, when I got my DC with an active internet connection, how would I configure my clients (Win7 devices) to join the network even on my domain controller is? I tried some configurations in these forums as well, but none seems to for what I'm trying (which seems very simple!). Can anyone offer some advice? I am not opposed to the fresh start. Thanks for taking a peek.

  Here is an example of configuration when all the virtual machines are configured for NAT.

  Virtual network Editor:

  DHCP disabled for NAT

  For an example, I assume that the NAT subnet in 192.168. 100. x. You can change this if you wish.

  DC:

  IP address: 192.168.100.10

  Subnet mask: 255.255.255.0

  Gateway: 192.168.100.2

  DNS server: 127.0.0.1

  Configuration of the DHCP server:

  Range: 192.168.100.150... 200

  Subnet: 255.255.255.0

  Gateway: 192.168.100.2

  DNS server: 192.168.100.10

  The DNS server configuration:

  DNS forwarding to: 192.168.100.2 (for other than the own domain URLS)

  Other servers or systems with static IP settings:

  IP address: 192.168.100.11... 149

  Subnet mask: 255.255.255.0

  Gateway: 192.168.100.2

  DNS server: 192.168.100.10

  Customer:

  Networking will be set to automatic.

  In this way, the domain controller will be the only DHCP and DNS server, but each virtual computer will be able to access directly to the Internet. And because the domain controller is the primary DNS, your ad cannot function properly.

  André