WRT54gl loses connection only on line channel

Hello

I met the wierdest problem.

My PC loses the connection with my WRT54GL router and in this case the only thing that brings the back of connection is made power cord from the router and then by him plugging.

When the PC loses connectivity to the router all other computers in the House connected by a wireless connection stay tuned! Only the PC connected by LINE loses connectivity. Restart the modem or PC does not help. Even clicking on the RESET button of the router does not help.

I am running Windows XP, the router is set to STAY ALIVE, I can connect to the router admin and see the IP but can not use the internet.

Does anyone have any idea why this happens?

Thank you

O.

On your computer, turn off the firewall and Antivirus and then check if you are able to go online or not. If still no then on your computer, open the command prompt window and type 'ping 208.67.222.222' and press on enter and check whether you have found all the answers, if so, you can assign a static DNS address for your computer.

On your, click Start - Control Panel - network - computer connection, right click on wireless network connection and click Properties and then select "TCP/IP Internet Protocol" and click on properties and below to select the option "use the following syntax address DNS server" and in favorite type of DNS: 208.67.222.222 and auxiliary DNS: 208.67.220.220 and click OK...

Once done, you can restart your computer and check if you are online.

Tags: Linksys Routers

Similar Questions

  • WRT54GL Local connection only

    I tried for this search in the forums, so I apologize if this question has already been addressed.

    I recently bought a WRT54GL router connected to my cable modem and then connected to my computer via one of the Ethernet ports.  But I can't connect to internet on my computer, I get local only.

    My computer could not read the CD that came with the router, however, based on what I read on the forums it seems that the CD is not necessary.  I use Earthlink and the service provider is Time Warner.

    I'm not really sure what's wrong with it, I thought it would be as simple as plugging everything in, but I guess I was wrong.  Any help will be greatly appreciated.

    Make sure that the Modem is connected to the router on the Internet Port and the router to the Ethernet Port of the computer. Do not connect any USB cable from the computer to the modem.

    Reset the router for 30 seconds, power cycle the router and once again, check the IPv4 address... If you get the IPv4 address 192.168.1.x and gateway as 192.168.1.1... then, try ping on the bridge. Type ping 192.168.1.1 and press ENTER. If you get 4 answers then, follow this link to configure the router.

  • connect the telephone line only to send a fax

    I just got my HP8600 and want to know if I can connect my phone line only when I want to send a fax?  I've never had the opportunity to receive a fax and so would deal with the connection of the phone only when I need to send a.

    Hello

    Yes, you can do it this way, if you wish. Please use the following manual to implement in your country:

    http://h10032.www1.HP.com/CTG/manual/c03045013.PDF

    Kind regards.

  • Dynamic table returns only a line

    Hello world

    I try to use a Recordset:

    "SOME concerts. EventDate, concerts. Location, concerts. Notes

    CONCERTS

    WHERE the concerts. "EventDate > = CURRENT_DATE.

    When I test the Recordset, I get 3 of the 5 records returned, which is exactly as it should.

    However, when I try to create a dynamic table to display the results - if I choose to show all records, or the default of 10 at a time, it shows the first line results from the Recordset.

    When I try to create a master-detail table and ask him to show one record at a time, it's there for that, but using the next/back navigation links, it takes me to other records, though one at a time.  That tells me that he doesn't know that there should be three records, but it only shows one.

    What am I doing wrong with the dynamic table, here?

    Thank you!

    I suggest that you start the page completely from scratch, because it seems that you made the rookie mistake classic to remove a dynamic object in Design view without realizing that any other PHP code is connected with it. When you work with dynamic objects, keep an eye on what is listed in the server behaviors panel. To remove a server behavior, select the referencing in the Panel and click the button "-" to remove it properly.

    In fact, you have two sets of records on the same page, that do the same thing. One is called to come, the other is called UpcomingShows. You get only a line showing in your table is because you use the recordset "to come". The Dreamweaver recordset code automatically retrieves the first record and then uses a do... while loop to create the region repeated in the table. What has happened is that your changes to the page have resulted in this line who appear before the repeat region:

    mysql_free_result($upcoming);
    

    This destroys the rest of the result of database before using it again. Therefore, only trace never appears.

    Dreamweaver always puts mysql_free_result() after the closing tag. Thus, it seems that your changes caused Dreamweaver to lose track of all the relevant parts of the server behavior. If you move this line to the bottom of the page, your table should work. However, as I said before, I think that it is better to start from scratch.

    One last thing: your SQL query contains the following WHERE clause:

    WHERE gigs.EventDate >= CURRENT_DATE
    

    It is an incorrect syntax for MySQL. It should be like this:

    WHERE gigs.EventDate >= CURRENT_DATE()
    

    CURRENT_DATE() is a MySQL function, not a constant.

    If all goes well, a little less head banging.

  • M30: Connect only with 42.6 K - how to increase speed

    My M30 connect only with 42.6 K speed. I have try all options to increase the speed, but the success. If anyone has the solution, please send me email to [email protected].

    I try the other series on my telephone line and connect them to the speed of 52 to 54K. Desktop even connect at 54K.

    Hello

    Go to Device Manager and choose the modem. Then do a right click and properties.
    You will find many tabs. Please check if the port of Maximum speed in the Modem tab option is set to the highest value.
    In addition, you can check the button in the Advanced tab settings in Advanced Port the controller must also be on the high (max).

    Please check these possibilities.

    Good bye

  • Satellite M30X-129 loses connectivity with the external USB device

    I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

    Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

    If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

    I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
    Thank you
    Abderrahman

    Hello

    This happens also with the external USB mouse?
    This occurs if the power adapter is plugged or only if the laptop running on battery?

    In-hubs properties > Device Manager USB root-> power management
    You will find the option called allow the computer to turn off this device to save power.

    I would recommend the brand and disable this option.

    Maybe it helps.

    By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

  • OfficeJet Pro 8600 all-in-One connected as network printer loses connection

    In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

    After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

    1. Start Control Panel  connections network and Internet

    2. Choose "network connections."

    3. Right click on "connect to the Local network.

    4. Choose "Properties".

    5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

    6. Select the tab labeled 'Power Management'

    7. Uncheck the box "allow the computer to turn off this device to save power".

    8. Select the "Advanced" tab

    9. Select the entry "power saving Mode".

    10. If this entry is set to change 'On' to 'Off '.

    11. Select 'OK', and then close the windows that were opened

  • printer wireless 3050 j611 guard lose connection

    My printer wireless-3050 j611 guard a lose connection. Sometimes the Internet work to a crawl when this happens. I have run all kinds of utilities, virus checkers, re - install printer DCP. When he gets back online, the Internet seems to run at full speed. It's embarrassing. I am connected via ATT Uverse.

    Hello hollywodBDA

    I work on the assumption that you are running Windows 7 that you have not specified a operating system that you are running. I will give you is a called HP support document: troubleshooting your wireless network and Internet access (Windows 7). If you are not running Windows 7 just Google search "Troubleshooting your wireless network connection" and Internet and pick the one with your operating system. Now, this document should help you identify what is happening on this is the cause of your network to go down. It is not a coincidence that you lose the connection to your printer when your network goes down that it communicates on the network. Think of it as a phone line, you talk to someone to say New York, and the telephone system breaks down. It is not a problem with the person you're talking to New York, but the network which has cut off the communication.

    Now, this does not mean that a printer can't get a network, it is just unlikely. I would consider the most obvious causes such as computers on the network and even the router itself.

    If you want to identify which device is take them down to remove network devices one at a time until the problem stops and/or Exchange on to see which is causing the problem.

    I hope that this will lead you to the solution on what take down your network. Thanks for posting this topic on the Forums of HP feel free to re-post if you still need help. Have a nice day

  • Lose connection Wireless at some site but when work around the site router works

    Original title: Wireless problems

    When I am connected to my wireless router, some sites such as who's who, I lose the internet connection. He said SSL issues.or CE NE MAY NOT BE THE SITE YOU ARE looking for "but when I bypass the router, the problem goes away. There are other laptop on the router there is NO problem. What can I do?

    Hello Dennis,.

    I'm sorry that you have a problem trying to connect to some Web sites.

    Just to make sure I understand your question, you lose the internet connection only to some Web sites, but if you unplug your router, you are able to connect to the website like Facebook without problem.

    Let's start with the basics on the wireless connection.
    -Make sure that the cables are properly connected to the router.
    -Restart your router, turn it off for 45 seconds and then turn it back on
    -Try again to connect to the problem site.
    -Update your drivers for your network card wireless

    Then I'd suggest that you update the firmware on your router. Go to the router manufacturer's website and download the latest version of the software package.

    Here is some information on the use of networks wireless that might be useful:
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If you still encounter a problem after trying the steps, answering the post again and I'll be happy to work with you for additional options.

    Sincerely,

    Marilyn

  • Link from Oracle to MySQL database select only one line

    Hello

    I created a connection to the batabase Oracle 11.2 to a MySQL database via a database link. The following statement shows that 35 lines are in the mySQL table:

    SQL > select count (*) from 'main_pages"@MOREWEB;

    COUNT (*)

    ----------

    35

    But a normal select statement only return 1 row.

    SQL > select 'subject' of 'main_pages"@MOREWEB;

    Object

    ------------------------------------------------

    Übersicht: references

    I use the mysql-connector-odbc driver - 3.51.30 - winx64. One is the newer version be installed because on Windows Server 2008 R2, I get an error with a missing dll file. The DataDirect ODBC driver is not possible, because we like to use the MySQL-database free one only support for DataDirect enterprise edition.

    I have also tried to limit the HS_OPEN_CURSORS or do not limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one line.

    HS Init.ora

    # This is an example of initialization file of the agent that contains the HS settings

    # necessary for the database to ODBC gateway

    #

    # HS init parameters

    #

    HS_FDS_CONNECT_INFO = moreweb

    HS_FDS_TRACE_LEVEL = WE

    HS_FDS_FETCH_ROWS = 1

    #

    # Required for the non-Oracle system environment variables

    #

    #set < varenv > = < value >

    HS trace file

    Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066

    Heterogeneous Agent release

    11.2.0.1.0

    Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066

    Version 11.2.0.1.0

    HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'ON '.

    HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.

    HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '.

    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".

    HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. "

    HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.

    HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.

    HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.

    HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.

    HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.

    HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.

    HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".

    HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.

    HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.

    HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '.

    HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.

    HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.

    HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.

    HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.

    HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.

    using mpgw as the default value to "HS_FDS_DEFAULT_OWNER".

    HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.

    SQL text of hgopars, id = 1, len = 36...

    45 00: 53454 C 43542043 4F554E54 282 HAS 2920 [COUNT (*) SELECT]

    10: 46524F4D 20606D 61 696E5F70 61676573 [FROM ' main_pages]

    20: 60204131 [' A1]

    Delayed open until the first fetch.

    Deferred execution open.

    SQL text of hgopars, id = 1, len = 40...

    45 00: 53454 C 43542041 312E6073 75626 has 65 [SELECT A1.' subje(1)]

    10: 63746020 46524F4D 20606D 61 696E5F70 [ct' FROM ' main_p]

    20: 61676573 60204131 [ages A1]

    Delayed open until the first fetch.

    Deferred execution open.

    Please can someone help me.

    Thank you.

    Bianca

    Bianca,

    Everything I've read on this point to a need to install/reinstall the Microsoft Visual C++ Redistributable Package for windows OS 2008.

    You will need to download the appropriate version for your microsoft form system.  There is a lot of information on this topic.  Just

    search on the web, and it should help you in the right direction.

    Thank you!
    Matt

  • VM loses connectivity after a reboot... help!

    I'm lost on this one, I've NEVER seen this problem before.

    The server is an HP DL380 G5 with two 1 GB network adapters. Running ESXi 5.0 (with all updates) one comes from ISP and we're going on the local network (server is mail, NAT and much more).

    After a reboot, the NETWORK card that comes from the ISP, loses connectivity, more often. It will be the Web sites (I guess that's the port open on the firewall) but nothing else. No internet, no. DNS, I can't even ping an external site by its IP. The only thing that works is the Web sites that are currently running. We use this connection for Web sites and Internet for the site so using NAT gives him around our PC, it is important that it works.

    The ONLY way to recover is to remove TWO cards from the network card in Windows and let Windows find their new (drivers). I got this server and copied down to older hardware, and never, it has a problem after a reboot and works with a number. On ESXi 5, even after fixation by the removal of the NETWORK adapter cards, once it gets restarted, I have to start all over again.

    I need to pass to the virtual machine, but so far it has been nothing but a nightmare.

    It is material or ESX that causes this problem, I don't know it's not on Windows server 2003 that they run...

    Any ideas? Please help if you can.

    The problem seems to be what I was suspecting, a routing problem internal VM. I thought you lost the 0.0.0.0 route to the internet, but instead, you actually get an another 0.0.0.0 route that points to the local interface. The route print output:

    Work:

    0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

    Does not:

    0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

    0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.1 10

    192.168.0.1 is the local IP address of the internal NETWORK adapter in your virtual machine. This means that for some reason, sees itself as the default gateway and also not trying to access the internet through your ISP router.

    If you look at the text notworking ipconfig/all command, you will see that the 'card Ethernet Local Area Connection 4' with the 192.168.0.1 IP itself now has as a default gateway.

    The LAN4 configuration is static, so it's quite strange where the new default gateway information comes. A quick fix after a reboot is likely to open the TCP/IP settings and remove the new default gateway of the interal NIC

    You could also enter a new route persistent to the ISP router with the metric is lower, but I think that we should first try to find out why your Windows 2003 establishes a default gateway on the internal interface.

  • Why only 3 lines to postponed? How can I download the older version?

    With this new version, I have only 3 lines to postponed an email. I can only add one name must then return to the address book. I would go back to the old version without doing a full restore, is this possible?

    First thing to do is turn on the Contact bar in the window of writing. Pressing F9 it switches on and outside. Use it to process emails. Browse the list of contacts by holding the CTRL key while clicking on contacts. When you all chose them one of the buttons add to use at the bottom of the pane to place in the address fields.

    Regarding the address only 3 fields, after completing the last press enter and another appears. Repeat if necessary.

  • My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

    My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

    Hello BrooklynWM!

    I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

    Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

    Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

    After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

    Best regards.

  • the magic mouse 2 loses connection

    My magic mouse 2 is loaded (88%) and connected via bluetooth to my macbook pro (late 2011, OS X El Capitan 10.11.4).) Sometimes it loses connection and after a short time reconnects, what should I do for him have always connected, I mean without capricious disconnections?

    Hello heide1,

    Thank you for using communities Support from Apple!

    I understand that your Magic Mouse 2 going through temporary disconnects and stops responding intermittently. We know that situations of this kind can be frustrating, but we are here to help.

    To begin troubleshooting, I suggest to read and work through the steps in the following article.

    Your mouse or your keyboard intermittently not responding

    Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

    Click or press a key

    • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

    Search for interference of signals

    • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
    • Keep devices wireless to 10 meters (30 feet) of your Mac.
    • Avoid putting metal objects between your wireless device and your Mac.

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

    See you soon!

  • My new airport does not detect my existing WiFi network, I can connect only via the LAN.

    Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

    Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

    You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

    If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

Maybe you are looking for