WRT54GS cannot connect after reset of the router

Similar Questions

• Old Airport Express lost after reset of the router, the connection cannot be seen/accessed

  the train:

  -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility

  -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP.

  -old (1st gen.) A1084 Airport Express used only as a customer to listen to the music of the said Macbook.

  I am a musician who has been using my old AEX to listen to the music and the recording via Airplay and Airfoil for my Roland onstage for years without problem. I don't remember how I initially put in place, but I think it's as a customer only... IE, it broadcast as its own wireless network, or extend my network wifi etc, I just use it for listening to music.

  Well, a week earlier, a disgruntled rogue ex-my local ISP hacked their radio tower and all the customer routers turned into useless bricks (and also all our wifi network names changed to a name that begins with "mother" and ends by "-ers", but that's another story).

  Local ISP technicians have managed to get my router all re - set up and working, but I had to reconfigure my wireless devices (example: wifi printer) from scratch to be able to connect again.

  The tenacious hold on is this old Airport Express.

  I try to use the instructions found online to get connected again, but nothing does.

  Yes, I tried pressing the Reset button for 10 seconds, etc... He just goes at once orange flashing or sometimes solid orange light, and don't see the Airport utility. I tried to plug its ethernet port to the router's LAN port to see if the Airport utility, would see no change, Airport utility requires no base stations found. It has no Airport icon in my menu bar and no Airplay icon in any relevant application such as iTunes.

  Remember that in past I was able to reset/reconnect after network changes, it seems to me (I don't remember how). BTW, its location is located a few feet from the router, in order to hang it up through ethernet is easy if need be.

  Once again, I only want to not to listen to the music and the tracking records of my Macbook. Roland aren't in a convenient place for an electrician. As you can tell the age of my stuff, I'm a starving musician, don't want to have to buy something new.

  Help?

  Hello lisajoy,.

  Thank you for using communities of Apple Support. I see that you are having some connection problems with your AirPort Express Terminal. You did a great job trying to get this resolved on your own! I'm happy to help you.

  To solve problems, get connected Airport please try the steps in this link:

  AirPort Express: How to join an existing Wi - Fi network in client mode

  If you connect and are experiencing problems using AirPlay and iTunes heres some more information:

  Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes

  Have a fantastic day!

• WRT54G - cannot connect computer wired to the internet through a router

  I have the WRT54G and unable to connect to the internet when you are going through the router.  I feel that I've checked everywhere can, but still does not work.  I connected the way the instructions, the lights are on the case and all that.  I have cable internet and when I plug directly, there is no problem.  When I try to 'ping' to check the connection between my computer and the router, I get "Request Timed Out".  I tried to reset the router and goes in this direction, but I can't go beyond checking the internet connection through the router.  Any ideas what I'm missing?

  Thank you!

  You should not use the installation CD at all.  If you throw it away.

  See here for the installer of cable.

• Site-to-Site VPN breaks after reset of the router

  Hi all

  I have a very difficult problem.  I have a CallManager server on one site (Site A) configuration and IP phones which connect you via tunneling IPSec VPN site-to site to Site B.  WAN link to Site B (cable ISP with IP static) can be a tad bit reliable at times.  Everything worked perfectly, except when the router resets or loses connection at site B, smashing everything.  I have the option tftp 150 defined on the server CUCM on Site (192.168.10.250).  The tunnel is NOT upward automatically after a router loses connection, and once this is the case, it seems that I can't help that can restore full connectivity.  I know I must be missing something, but have no idea what.  The nbar-Discovery Protocol on the external interface of the router on the Site B shows TFTP and Skinny packets go out, but nothing back in.  I can't ping all internal resources on the Site A of Site B.  I'm doing a "isakmp crypto to show his" on each router and it shows the tunnel as being upward.  In order to back up the tunnel, I need to access the router on the Site A with the SDM tool and do a 'test' of the VPN tunnel.  It shows it as inactive, and when I have SDM generate traffic, using the source IP address as 192.168.10.1 (inside the interface of the router on the Site A) and destination IP of 192.168.11.1 (inside the interface of the router on the Site B), the tunnel back to the top.  Yet, even if the tunnel is restored, nothing works as much as to be able to ping site starting tftp from Site A to Site B and Site B.  Any help on this is GREATLY appreciated.  Any suggestions on how to configure a VPN site-to-site-reliable so that if cnnection is lost on one end, the tunnel back upward and devices on Site B can access resources such as on Site A CallManager server.  Thanks in advance!

  Hello

  One way you can have the tunnel come back automatically even if it breaks down is configure SLA monitoring on one of the routers of the site so that it sends periodic pings inside the IP address of the router on the other site. For example, on the Siite to configure it for SLA monitoring of IP than his inside source 192.168.10.1 and making ping inside the interface of Site B interface regularly, 192.168.11.1. Configuration guide, please see the below page:

  http://www.Cisco.com/en/us/docs/iOS/12_4/ip_sla/configuration/guide/hsicmp.html#wp1027188

  About traffic has not managed, pouvez you please paste the result of ' show cry isa his ', ' cry ipsec to show his ' and the configuration of the two routers if possible?

  Kind regards

  Assia

• How to secure the network after reset of the router WRT54G2

  Hello

  I could reset the WRT54G2 router with no problems, I have the IP address as 192.68.2.1 right now, but when I try to record things in the wireless security mode to make my secure system loses connectivity, fall of red zone. Then I can not connect to 192.68.2.1 more. How can I make the network secure? I usually follow the steps for making it from docs online but seems to have problems with it. Is that I can make it safe with the 192.68.1.1 or the amount of the fine with 192.68.2.1?

  San

  Make sure that your computer is connected to the router by an Ethernet cable, if you try to change the settings on your router using a wireless computer, then you will face this problem. So wired your computer to the router, turn off the WiFi feature on your router and then changes on your router and you should be to save your router settings.

• vSphere cannot connect after time on the host change

  I am a relative noob when it comes to virtualization.  I did a lot of research for the response, but can't find it.  Maybe you guys can help.

  Connected to the host (VMWare vSphere for ESXi 4.0) management console, I changed the time on the host because he was distant.  After that, the vSphere console has become very slow, and when I clicked on another tab it has expired.

  I closed vSphere and tried to reconnect and now I have a message that says:

  vSphere could not connect with the server vCenter Server "[host IP address] '.

  Details: A connection failure has occurred (unable to connect to the remote server)

  I went directly to the physical console machine and press F2 to enter the system setup.  I restarted the management agent.  I can ping the IP address.  I can not connect via puTTy, but I do not think that I never activated the SSH access.

  Has anyone ever encountered this?  What should I do?  I can't restart the host right now because the production servers are running on the VMWare.  If I have to restart later, what is the correct procedure for this? (close the BONES of the VM, and then restart the host?)

  I had this happen before. I was unable to restart the services or navigate from the console. I waited until hours off-peak and connected directly in the less critical guest OS and stop them. I had to stop several before I could get access again vcenter. Once I had access i vMotioned the rest of the guests to other hosts and restarted the ESXi host. It's a risk, because if you cannot close machines you have to powercycle. You seem to have access, so you can be able to stop them from the CLI on the host.

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• How to connect my PC to the router?

  New connection PC Help!

  Hi, we are changing our IPS at Virgin (connection broadband) to the warehouse Utility (router wireless connection), but I can't work out how 'connect' my PC to the router. My wife has a laptop that is already running through the router. I tried the obvious options on the control panel to connect my PC, but have failed miserably! Any ideas, please!

  Hi Eagozz,
   
  Connect the router to the computer by referring to the manufacturer's manual.
   
  Try to connect to the available wireless network. Here are some articles that might help you to do the same thing:
  To connect to an available wireless network
  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Cannot connect after withdrawal of a domain.

  Disjoint my domain to work and now it does not have one of my passwords to connect. Nobody here knows the identifier of the administrator because I was hired just to be the administrator. Where should I go from here? Is it possible to get around the login screen?

  Here is the solution to this problem from Microsoft:

  "You can not connect after you remove the computer from the domain.

  <>http://support.Microsoft.com/kb/317049 >

  HTH,
  JW

• Cannot access Internet even if the router USB adapter Wireless G made the connection and

  Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet.  The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop.  My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it.  Thank you!

  Hey, thanks for trying to help out.  It turns out that my firewall did not allow the laptop to access the internet.  I made a few adjustments on my firewall settings and it all worked out great.

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• waitForUpdates method does not detect updates after reset of the connection

  Hello

  In my case, I use waitForUpdates() method to detect the VMotions (. i.e. whenever a VMotion arrived I have trying the GET the update using this method). It works perfectly in case of normal use.

  But all of a sudden after a reset of VC connection. This waitForUpdates() method makes me not updated.

  When the session id gets modified waitForUpdates (propertyCollector, version) would also have a new propertyCollector object (to give you the new collector of property obtained with the new connection object), so even now why it does not return me the updates after the reset of the connection.

  Please let me know if I'm doing something wrong in the treatment of this.

  Please let me know how to handle the connection reset and collect updates later.  Which can affect the waitForupdates in updates outside the collector property object to return.

  I even tried with the checkForUpdates method was the same behavior.

  Thanks in advance.

  Please check if you create the PropertyFilter after reset connection. Good initialization of the filter property should solve your problem.

  Thank you

  Aditya

• 10.0 Safari cannot connect to most of the servers

  With the help of El Capitan 10.11.6 on a MacBook Pro 2011 which has worked fine until... I did the update of Safari 10 today (with iTunes and Camera RAW updates, iTunes is very well and I do not use RAW images). Now Safari does not load most of the sites. For example: Google and work, but apple.com and ask.com discussions.apple.com do not work. "Safari can't connect to the server. Don't use not VPN or OpenDNS, no change in Network preferences.

  Have you tried:

  Restarted Safari

  Connected to the Admin ACCT. (Safari works fine it; loading all pages, so this problem is specific to my normal user account)

  Caches allowed via the menu Developer

  Deleted cookies

  Restarted Mac.

  Turned off WiFi and reset modem and router

  Added the new network location & remove the old (by suggestion of Apple forum)

  Turn off all extensions of Safari (Pinboard, LastPass, JSblocker)

  Ran Malwarebytes using current data files (found nothing)

  Anyone have any other suggestions?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Satellite Pro M70 failed to refresh an IP address after reboot of the router

  My laptop is not able to repair the Wi - Fi connection is if I reset the router. I have to power cycle the phone so he can always reconnect as it gets stuck on getting the network address... Known problems with the hotfix on this matter or anything...?

  Thank you

  Huw D.

  Hello Huw

  As much as I know there is has no problems known with WIFI connection and I n know exactly what happens with your WIFI connection. After the reboot of the router try turning off the WIRELESS card with for a short while, turn it back on and try to connect again.

  The parameters are the same and nothing should be changed.

  Good bye

• Help: Laserjet M1536dnf does not scan after replacement of the router

  Hello

  I have a LJ1536 that has worked well until I had to replace my network router after it failed. Now, I can print on both computers I have in the same local network, copy locally in the printer, but will not scan. The printer is connected to the router via an access point configured as client and connected to the printer wireless. After the failure this AP router had to be reconfigured to the new router.

  I tried scanning disabling firewall and anti-virus, delete and reinstall all software using the latest version on the web and nothing. FX HP Toolbox works very well. HP Print and doctor Scan did not help. WIA service is Started (auto mode) on the computers.

  I get the message on the two computers during an attempt of analysis:

  Inaccessible scanner

  Scanner communication cannot be established. If make sure that your product is powered, check the connection and make sure that your network is working properly. If these conditions are correct, restart the product and try to scan the image.

  If you are running a software firewall, it can block scan communication. Please visit www.hp.com/go/wirelessprinting for help to configure your firewall.

  Configuration:

  Windows 7 64-bit on both computers

  LF1536 FW dated 14/01/2013

  Any suggestion?

  Hi Jhenrichs,

  Thanks for the reply.  If the AP was configured to router manufacturer's specifications, it should allow a communication as it did with the previous configuration.  Check the below settings that may fix the problem.

  The AP settings:

  1. make sure that port forwarding is disabled

  2 disable DHCP (this should only be enabled on real router), it can be set to automatic or static, but disable DHCP on the access point

  I hope this helps!