WRT54GS - problem with changing the router IP
Here's my problem: I want to change the IP Address of the router (and subnet) to 192.168.1.1 to (for example) 192.168.28.1 (long story). I can do it on the base of the router configuration page.
I have a desktop with a fixed address configuration: 192.168.28.90, subnet mask 255.255.255.0, default gateway and preferred DNS server: 192.168.28.1. Three laptops get dhcp addresses.
Access to Internet is fine, but local communications on the local network no longer work: shared folders are not accessible, and I can not ping to one local PC to another. (But I can ping anything on the web)
When I'm back at 192.168.1.1 all is well again.
Someone at - it includes what is the problem?
Thank you.
It is most likely a problem of computer software firewall.
To resolve the issue, reset the router to 192.168.28.1, then power cycle your network, verify that your Internet connection works on all computers. Then go into the computer on each computer software firewall and set it to "trust", other computers on your network.
Tags: Linksys Routers
Similar Questions
-
problem with changing the order of tab on tab control
Hello
I am aware that the same question has been asked over three years - but I can't yet find the problem in what I'm doing...
Description: I have two controls tab, A tab with three tab and tab B with two controls on a Panel. For the following discussion, tab B is of no interest. Each tab control has several numerical indicators, of type integer and double. Now, I want to add a fourth tab control to A tab. This method works.
Following and problematic stage, in the Publisher of the IUR I select the new tab (most right) and move two positions to the left. It's still ok until I try to display a numeric value of order of tab 3 (the new tab control is left to it). I get an error in calls to SetCtrlAttribute, complain about an invalid control ID... However, I didn't touch any control over the tabs, or add a new control. In addition, I did not touch the generated include file... Visual inspection did not show any changes in the include file (the new tab control is listed only when certain controls are added)
Posting numbers on the first/far left tab control work only on 3 and 4 which are suitable for the new (and still empty) new tab will generate this error. Adding a control to the new label does not change the bahavior.
Help is appreciated!
Wolfgang
Wolfgang,
When you get the handle for your tab using GetPanelHandleFromTabPage:
GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 0, & TabHandle);
the third parameter is an index for the specific tab you want to address. If you change the order of the tabs, you can change the index, too. For example, assume that you have a digital control on the third tab from left to right. You want to assign some value, so this, you:
GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);
SetCtrlVal (TabHandle, TAB_numMyNumeric, 1);
Now, you add a new tab to the left of the tab with the digital contorl. The new tab is now index 2 and the original tab is index 3. When you call:
GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);
you get the handle to the new tab. There is a control with the same ID as TAB_numMyNumeric, so that you get a runtime error.
Personally, I like to use an enumeration to my tabs so I can keep the lines:
enum {MY_FIRST_TAB, MY_SECOND_TAB, MY_THIRD_TAB,...};
So if I redesign the tabs or add a new one I just re - order enums and everything works fine. Also, I used the same names in my constants of tab, to help keep things straight:
GetPanelHandleFromTabPage (MainPanelHandle, PANEL_FIRST_TAB, MY_FIRST_TAB, & TabHandle);
Tony G.
-
I'm migrating from ACS v4.2.1 to v5.3. I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.
Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?
I tried without problem. I changed the ip address of the WLC several times.
You must ensure that:
1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.
2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.
Here is the procedure how to change the ip address of the interface (according to the doc of cisco):
I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).
HTH
Amjad
-
No Wireless Connection and can not only change the router
I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.
Hi estesblake,
(1) do you get an error message when you try to access wireless internet?
(2) what is the number of brand and model of your router?
Follow the steps outlined in the article below to fix the problem of wireless network connection
Wireless network connection problems in Windows
Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.
-
I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:
Exit code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF014...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 1 Error (s)
-Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.
ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).
When I go to the solution, then it says: rerun the installation. Select a different installation location.
But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?
Can you help me with a solution? Thank you!
Hello
Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5
Hope that helps!
Kind regards
Sheena
-
Problems with "" change in "in Lightroom 4"
I just installed Lightroom 4. Problems with "change in ' under 'PHOTO', when I select a program to edit photo in I download a message error - ORDER of EXECUTION ERROR INATTENDUE: bad argument #1 to 'down' (string expected, got the draw). I tried uninstalling and reinstalling, still have the problem. Any suggestions?
Thank you
http://feedback.Photoshop.com/photoshop_family/topics/lr4_external_editor_failure
Frans
-
Problem with uninstalling the Toshiba Bluetooth Stack for Windows
Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.
The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!
I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully
Thanks in advance.
I would try to delete the folder: "C:\Program Files Toshiba Stack.
Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack. -
Problem with finding the SmartGlass an Xbox to Store or App Store
Original title: xbox a smartglass
I can't find that the smartglass an Xbox on the windows store or the appstore please help
Hi Ibrahim.
Please contact Microsoft Community. I understand that you have a problem with finding the SmartGlass an Xbox to Store or App Store. I will surely you help with this.
You can download Xbox a SmartGlass from the following Windows store link.
http://apps.Microsoft.com/Windows/en-us/app/Xbox-one-SmartGlass/c3a46cb8-e733-4579-B716-862e123fa831
For more information you can check the link.
http://support.Xbox.com/en-us/Xbox-360/apps/SmartGlass-Info
Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.
-
Original title: problem with installing the game
install a game but saying o\s
No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help
Hi harsh,
For a better understanding of the issue, I would need more information on your side.
1. What is the name of the game you install?
2. where did you install the game from?
3. What is the full error message?
4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?
To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.
Please provide the necessary information to help you further, I'll be happy to help you.
-
Facing a problem with writing the custom for WLS identity assertion provider
I am facing a problem with writing the custom for WLS identity assertion provider.
Requirement:
Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
< MBeanAttribute
Name = "SupportedTypes.
Type = "java.lang.String [].
Writeable = "false".
Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
/ >
<!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
< MBeanAttribute
Name = "ActiveTypes".
Type = "java.lang.String [].
Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
/ >Problem:
Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
I did some experiments with the cookie name, to see where the problem could be
Identity asserter provider is triggered for the following cookies:
OAMAuthnCookie_blr1234567.idc.oracle.com7777.
blr1234567. IDC. Oracle
blr12_XXX. IDC. Oracle.com
and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
Tried it with giving the name of the cookie after the encoding of the colon< MBeanAttribute
Name = "SupportedTypes.
Type = "java.lang.String [].
Writeable = "false".
Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »
/ >
But still does not work
Am I missing something? Any help will be appreciated.
Help, please!colon ': ' is an illegal character in the name of the cookie.
RFC 2616, Section 2.2 says:
token = 1 *.
separators = "(" | ")" | " <" |="" "="">" | " @"
| "," | ";" | ":" | " \" |<">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
It is clear ":" a "separator" and thus not allowed in a token or a cookie name.
">"> -
Problem with editing the content in the administration Console
Hi I have problems with editing the my site published in the administration Console.
Everything what top an embeded google map works fine, but everything below is not clickeble/editable.
Someone else has this problem, and you have any ideas on how to solve the TI?
Hello
Will you please try to remove the code embed to Google Map and then check, because it seems that the code used is in conflict.
Also test with the Google Map widget in the social widgets.
Thank you
Sanjit
-
Problem with REPLACING the clause in Sybase
I am facing a problem with REPLACING the clause in embedded SQL with a Sybase database.
My Cold Fusion Server is MX 7.
The database is the Adaptive Enterprise/12.5.0.3/EBF 10689 IR/P/Sun_svr4/OS Server 5.8/rel12503/1915/64-bit/FBO/Thu 23 Jan 16:05:19 2003
That is the problem. I have a variable bureau_incode of Cold Fusion, which I use to set the values in my IN clause. When I comment on my request and display this value in the HTML page, bureau_incode has the following value:
('TAB', 'OGC', 'BIG', 'OLA', "MDG", "SEO", "OSP", "ANOTHER OWD ',' ', 'PSHSB", "CAT", "WTB")
My CFQUERY embedded SQL looks like this:
Quote:
< name cfquery = "qResults" datasource = "#request.dsn #" >
Select Name,
bureau_code,
Telephone,
Mobile phone,
Pager,
E-mail
Availability,
Explanation,
Password,
Admin,
last_login = convert (varchar (20), last_login, 0)
of PAMS where availability = ' don't
< #request.seltype # cfif IS NOT "ALL" >
and bureau_code IN #bureau_incode #.
< / cfif >
< / cfquery > -
ICH habe heute im Rahmen eines Testlaufs ein herumgeschickt Formular. Verschickt wurden die von von der devising E-Mail address of Outlook accounts, der bei dem Verteilen open war. ICH konnte trotzdem noch eine andere für die Rucklaufer typing E-Mail address, was ich getan habe auch. Rucklaufer-Test-die sind dann a sharp eingegebene E-mail worse.
Für die Verteilung sollen die Rucklaufer is right an eine andere E-Mail address go. Nun kommt beim erneuten Verteilen is nicht noch ein bad das Fenster zum der E-Mail address change. D.h. alle kommen wieder auf die eingegebene Rucklaufer e-mail address.
Wie kann die E-mail für die Rucklaufer change?
Vielen Dank! Viele Grüße, franziska92
Hello community,
during a test, I sent a form to my colleagues to check if the formula works well. While I did it, I entered all the answers should go to an e-mail address. After that the form was sent via the E-Mail address of the Outlook account that was opened at the time of sending. All responses of my colleagues received by the mail address that I entered before sending. If everything worked as I wanted it to be. In the real world, run all the answers should go to a different address. But I can't change the e-mail either address. The window that opened during the send process is always ignored.
So, how can I change the e-mail address that you will receive all the answers?
Thanks for the help,
Greetings, franziska92
Hello franziska92,
meinst identities die in den Voreinstellungen von Acrobat? Sleep you can email address entries, wenn ein Formular versendet wird die: Beim first use der Verteilen-Funktion wird sharp identity abgefragt und abgespeichert - EIB erneuter use dieser Schritt there fehlt, da die ja schon ist ausgefullt Information. The musst die in den Voreinstellungen dann change.
I hope, das hilft.
Viele Grüße
Dietmar
-
WRT54GS problem with bittorrent
I have a WRT54GS, flashed to firmware v 1.52.8. It was working fine until a recent move. I put in place after that I moved into my new place and got connected services (Comcast) and that's when I noticed the problem. I have a PC connected via CAT5 via the router and use the point wireless for my laptop. In the past, my average download speed on torrents with seeds decent were about 1.5-3 MB/s (Yes, it's MBps Mbps not...) I know the difference) recently however, they head to anywhere from 150 to 250 Kbps Kbps. Uploads are not affected... they seem to be on average about the same. In addition, during the torrent download, web browsing/email/etc does not work: everything happens to expire despite the QoS settings I have in place on the router to avoid these problems.
At first, I assumed it was my ISP throttling my connection - Comcast has been called to do in the past, after all - but after testing the Glasnost reported no limitation by my ISP, I tried with the PC connected directly to a cable modem. Result: sustained speeds of download of 2.5-3 MB/s during two trials downloads (Ubuntu Installer ISO). During these downloads, I could navigate to wesites without getting timeout errors as I do when behind the router. This highlights quite peremptorily the WRT54GS as the source of my problem, so I wonder if anyone has any suggestions to solve this other than to launch the router and get a new.
EDIT: I should mention that I have only torrent on the PC, so it's not a wireless issue.
Do a reset factory and try it without changing all the settings except the foundations (e.g., wireless security, password)
-
HP4645: HP 4645 - change the router for Humax and now always invalid password
Hello HP / person
Please help me, I change my ADSL internet fiber and provider gave me a router Humax. However, when I tried coonect Assistant wireless via HP4645, it always show me "invalid password" this wireless I use 5 to 6 devices so I'm very sure that the password is correct.
I tried putting the Cd and it ran however it n SSID inavailable
Please help me before I change the internet from ADSL to internet fiber with new router it works just perfect.
Hi @c13pan,
Welcome to the Forums of HP Support!
I see that you are unable to get your HP Deskjet Ink Advantage 4645 e-all-in-one printer connected to the new router. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I understand that this can be frustrating, we should be able to get this to work for you. Looks like the printer must hang on the old settings or trying to connect to the wrong network.
To correct this problem, try the following steps:
Restore the default settings network settings.
1. press on the wireless button to access the menu of the status of wireless.
2. press the button next to settings to access the settings menu wireless.
3. select restore default settings.
4 confirm the selection to restore the default values.
- Before you reconfigure the wireless, make sure that the SSID is not hidden.
- If you have a dual band router, rename the network 5.0 GHz and the name of the network is unique.
- Make sure your computer is on the 2.4 GHz network when you try to reconfigure the wireless.
To confirm you are on the same network and the password is correct, please use the printing and scanning doctor.
HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. Download and run printing HP and doctor Scan quickly and automatically multitask resolution of known issues for this problem. When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.
Maybe you are looking for
-
Deleted iPhotos to make more space but still have the same amount of storage
Hey guys, I deleted my app iPhotos and folder to free up space on my computer, but it still shows the same storage space. Are these photos still stored on my computer somewhere and why storage is not to show more space? Thank you
-
is it possible to recover a lost project
trying to save a project to an email he just disappeared leaving behind "it" (that's all). What is recoverable in some way
-
8.3 and word2007 Acrobat (version family and student) does not not in one of my user accounts - no problem in others; downloaded Acrobat 9.3; problem persists in Acrobat; Failed to get support for Word as they know is no longer my (expired) product k
-
Can I upload photos directly from my Nikon D500 in Lightroom? I work on a Mac with OS X Yosemite desktop, version 10.10.5. 13 items does not recognize my new camera and thinking about upgrading to creative cloud.
-
timing of slides in lightroom slide show cc
I create my first slideshow from lightroom using cc. I noticed, it offers two options for timing: manual and automatic. I see that I can set the lighting of all the slides to show at the same speed.#1-is it possible to control some individual slides