WRT54GS UPnP cut wide Internet access

Hello, everyone! Having an Apple TV for about a year and just recently get a Roku, I noticed a strange question. Whenever I use UPnP to broadcast locally videos, all access to the internet are cut off and stays off until I unplug the router and plug it back. LAN works very well, so continuous streaming (and works very well), but there is no access to the outside. Is there something I can do to fix this; is this a case of a broken router or a bad internet service?

One other common Media Streaming Server is DLNA. On a Windows computer, this option is enabled through Windows Media Player and your DLNA capable devices will be able to see your Windows user like pictures, videos and music files.

Tags: Linksys Routers

Similar Questions

  • Internet access WRT54GS - No.

    Hey, Ive had problems with internet connection for these days and ive been what I do usually just unplug the router and the modem and turn their back on but that did not work this time, its connection again but it just says not: no internet access, but it will connect when I connect my laptop to the modem Anyone know what I have to do?. is my router linksys wrt54gs version 6

    Go ahead and perform a hard reset full and reconfigure the router back to normal.  See if that helps.

  • Blu - ray 570 - internet access failed

    I have problems connecting with my BRP570. I am running Mac OSX 10.6. I have a router Linksys WRT54G 2.4 Ghz and a Netopia modem. My internet is speed of 3 mbps. Everything worked perfectly for the last 10 months... until now.

    When I connect the BRP-570 directly via an ethernet cable from my modem I get the message that the connection is OK and the internet access is OK.

    When I connect the BRP-570 via a cable ethernet cable from the router attached, I get the message that the connection is OK and the internet access down.

    But even when I go back and use the wired connection directly from my modem, where internet access is OK, I always get error messages when I try to connect to an online service such as Netflix, Hulu or Youtube.

    I then get an error message saying "cannot find the server. "IP address:-.-.-.-
    The irony is that when I run the numbers of network settings Internet status all IP and subnet mask and all appears well.

    When I run the System Info screen I see all... EXCEPT at the very last line, it says "Provisioning Server Connection Status: failed.

    I tried everything... resetting the network settings, the settings on my Mac OS x network settings. I tried the stealth mode and non-stealth mode in the settings of Pings. I tried to reset each device again.

    Nothing makes no difference. I suspect it might have something to do with Earthlink, because he started after they reset the settings of my ISP. But even after clearing and reload all settings of network Sony BRP, the problem persists.

    I don't know why they make a device that has so many hoops to jump through to connect. I noticed that the Sony site is much the same. At least I have type the EXACT name of the blu - ray player it will reject everything, as if there is no such thing as a BRP-570.

    Ugh... frustrated!

    (I will not repost this twice, but I wanted to clarify more details in case anyone can be of any help. I'll start now to try to get in touch with Sony about this. (Thank you!)

    p.s. just tried to call Sony. After having been harassed in broken English for 20 minutes on the basis of the ABC of modems and computers that I will be transferred to the next level of tech support tomorrow. I would call the Helpdesk of Sony as catastrophic to nonexistent. Frustrating!

    Hello
    I have a few questions. Is your internet connection DSL or cable?
    What is this before you went with Earthlink? How your computer connects to the Internet? Is the model number of your BRD570 player really or is - this BDP-s570? I can't find a US / Canada of this model. I might be able to give you a few things to try, but I need more information.

  • WRT54G windows 7 without Internet

    Firmware v1.1 4.21.1

    Hello

    General information... as a short but detailed as possible

    I have the wired connections that follows:

    Desktop PC (Windows7)

    Bedroom PC (XP)

    Printer

    PS3

    wireless connections:

    Room 2 PC (XP)

    Laptop (XP)

    I had all this running smoothly across the router from W7 is released and installed on the desktop computer.

    Yesterday, our internet lost space through our cable provider. Came back on today, but here's where the problems start.

    I confirmed service service providers is back upward by connecting the modem directly to the desktop. Everything is ok.

    I then tried to connect through the router WRT54G, but W7 tells me that I have no internet access. I can connect to 192.168.1.1 OK, but on the status page, it shows me the following:

    IP address: 0.0.0.0

    Subnet mask: 0.0.0.0

    Default gateway: 0.0.0.0

    None of the list of the DNS 1, 2 or 3.

    Troubleshooting network in W7 I said the "DNS server not responding".

    Trying to do a ping test 192.168.1.1 in the Administration tab says "network is unreachable".

    The local DHCP Active IP network Table / status shows my DT 192.168.1.100 but agin not able Ping this address, again "network is unreachable".

    I tried options DHCP Release and rescued, but nothing changes.

    My next step was to reflash the firmware and power cycle the router but still no change.

    This is so, I can't access the internet through the router (only directly from the modem to the PC) so I get a lot of grief for children who want to play the PS3, but more important still, I can't online from my workstation in the bedroom. I would be surprised if the router is dead despite his age, because I can access the page to admin without problem.

    Any ideas on what I can do to get everything working again.

    THX

    Update

    Two power cycles later and all work again. Don't know why, but hayho.

  • Windows 7 - connected to wireless but no Internet access

    I understand that this has been asked before and there are many "solutions" posted on different forums that are not relevant to my problem or simply do not work.

    A few weeks back, I was on vacation, my daughter called to ask if I had cut the internet router and BT Hub as she was not able to connect to the internet. It had been fine the day before. I didn't and I couldn't do a lot the lot so said I would sort when I got home.

    I just spent the better part of a week trying to access the internet on his laptop, a Toshiba running Windows 7. I know that the internet and wireless works perfectly as his cell phone is sitting right next to my Sony Vaio running Windows 8. Also, my Sky TV, Kindle, Iphone and iPad to my wife connect seamlessly. It would seem that the possible culprit is a Windows Update which took place on 31 August. I tried to go back to her but she was advised by a friend to uninstall the update and she tried to make a file at the same time and now the reversion will not work.

    When the laptop starts up, until I connect, there is a dialog box indicating a wireless connection and correct network is listed.

    However, after I connected, even if the wireless connection is still showing as a good signal and 'Connected', it is currently connected to: section shows network not identified; No Internet access.

    I ran the gamut of the instructions in uninstalling/reinstalling the drivers of network, playing with the settings of Virtual WiFi miniport and almost everything that is proposed on the other forums but not luck so far.

    All I know is that someone will want to see the command ipconfig/all results so here they are. I removed the spaces in line to get them on a single page.

    Short using 'rebuild the hard drive' Toshiba, I am now at a loss to know what to do. I would also like to know WHY this happened and how it could be avoided in the future.

    Any constructive help appreciated.  Thanks in advance.

    WINDOWS 7: CONNECTED WI - FI NETWORK, but 'no INTERNET '.

    Solution:

    Start > search, then type "services.msc", click on "services": "

    in "extended", make sure that "DHCP Client" is the "road". Then click on 'standard' of a window, make sure that 'Internet connection sharing (ics)' is not 'disabled '. If this is the case, then click on it. In the "General" window, search for "Startup type", it through «Automatic (...)»

  • Client VPN prevents internet access from other computers on the network

    Hello.

    I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

    On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

    Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

    Thank you

    H. Adams

    Hello

    Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

    Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

    Vikas

  • Problem WIFI (no internet access)

    Hello, guys. I week ago I had a Pavilion dv4 (dv4t - 4100) with Intel 802.11b/g/n WLAN. He connected nicely to my router when tonight, he began to show "no internet access", even if the computer recognizes the router and says the signal is at 99%. I guess that a link in the process of WiFi connection was broken at a given moment. It happened between creating a new user account and maybe installing Safari browser. I'm not sure. Or it could be hardware, but nothing shows up in the analysis of troubleshooting or in Device Manager.

    To the HP Support Assistant, shows as follows:

    Microsoft Virtual WiFi Miniport Adapter connected #2-non
    Microsoft Virtual WiFi Miniport adapt - not connected
    Intel(r) WiFi Link 1000 BGN - wireless network connection
    Atheros AR851 PCI-e Gigabit Ethernet (NDIS 6.20) controller - not connected

    The HP network audit, indicates the network in my local router information, internet IP address: not available.

    I'm really confused, because I can not deal with same software that manages my WiFi connections. I found "Intel My WiFi Technology", also "HP Connection Manager" and especially WiFi connections to the taskbar. Then, we should I use and set?

    My questions are:

    (A) if I was using internet without opening 'Intel My WiFi Technology' and 'HP Connection Manager. Do I really need these software? Why are they in my book and why should I activate them?

    (B) if it is important to use one of these programs mentioned above, or both, why and how should I use if I connect to the internet without problem before? And it will restore my internet connection?

    (C) what WLAN module I have? It is said in my order Intel 802.11b/g/n WLAN. It is said in the HP Support Assistant Intel(r) WiFi Link 1000 BGN. Are they the same?

    (D) after identification of my WLAN module, where can I find a driver for it? Because one of them must not be found anywhere. I am in my second built-by-me-bench and I never had trouble to find a drive. For some reason these names I have mentioned do not exist in the list of drivers to Intel. I tried the HP site, but it's too complicated and it seems do not have this key WLAN.

    (E) at the end, how is the best way to connect to the internet and how do I configure my phone for a first and fast connection? Or I have to do anything and I just need to fix something to go back to where it was before, when I was using internet without problem and in a simple way?

    Summarize: I'd love to see a feature more late who says: "connecting dock", where all possible means of connection, WiFi and cable, can be defined in a single window, with simple and clear tutorials.

    Moreover, I like the laptop. Well done, cute, smooth and not full of blotware. I also loved access to all material, simple as a click of the fingers. This will be very handy when I replace the HD for one SSD and mix in a Blu - Ray player. But is a pain.

    Well, I really, really appreciate all responses.

    See you soon,.

    It's the software antivirus (Avast). For some reason when I created the new account, the Avast did not load the new settings and blocked the internet (don't ask me how).

    I uninstalled and tried to establish a connection and I got the same 'no internet connection' icon, but when I tried to open Safari the network is is behaved as if was the first time that I accessed internet. A WiFi window pops up, which I closed, and the internet connection has been restored. Now I'm going to reinstall Avast from scratch.

    Detective Conan.

  • I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

    I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

    Thank you

    Leroy

    Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

  • How to create network without internet access

    I have three devices: air mac, mini ipad and iphone OS. but I can't access the internet.

    How can I create a network without internet access?

    Maybe I just need another router, but sometimes, I just take my mac and iphone. It is impossible to get the router with me everywhere.

  • no internet access at el capitan

    Mac Pro with El Capitan. No Internet access with any browser, but I can access the Internet using the recovery system (this is what I now use to access the site of discussion). Already verify permissions and fix them with disk utility. Other Mac connected to the same router (Apple) can access the Internet without problem.

    It seems I have to re - install El Capitan. Fix?

    How you access the Internet? Wired or wireless? Do you have a good IP address? (Note that the one that starts with 169.254 is NOT good.) What about the access with something else outside of a browser, such as the Mail app? Other devices on your local network can access the Internet?

    Good luck.

  • Extend my extreme network with another extreme - waiting for internet access

    Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

    1. Changed IPv6 link local parameters
    2. Tried the whole upward on my Macbook and tried on my iphone
    3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
    4. Tried to create a network with Extreme2 connected directly to the modem
    5. Extreme2 factory reset after every attepmt

    And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

    Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

    Thanks for any help.

    Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

    Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

    The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

    Post back if you need some tips on using the "Wizard" for your configuration.

  • Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

    Hello

    I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

    I'm wired; but have wireless for other things (Kindle, etc..)

    When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

    Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

    ' Currently logged on:

    and just below it says: (to the right of the photo of the House) network 5

    and just below it says: internet access

    That's all it lists the wireless network connection with my name and the names of other connections in the district.

    My question:

    the name "network 5"?

    HP says it is my cable provider; my cable provider says it's at HP.

    This can be changed?

    Thank you!

    Hello Denise,.

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I understand that you have a problem with wireless networks.

    Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

    If you don't want the name of the connection to be listed under active connection, follow the steps.

    (1) open the "Control Panel".

    (2) select and open "network and sharing Center."

    (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

    4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

    Let me know if it helps.

    Have a great day!

  • No internet access on Internet Explorer after upgrade Win8.1

    Hello

    yesterday, I downloaded windows 8.1 but now I have no internet access. When I click on internet explore that was on my normal desktop but I have access to internet on internet explore on the main front page, I can't really use that one, it's very tedious.

    I prefer to use internet in the normal way. Can anyone help?
    Thank you.

    Thread is marked as answered. Is everything OK now?
    I have too many machine with Win8.1 but I don't have this problem. It's okay that surface I use applications requiring internet connection works.

    You can test it with another browser like Chrome?

  • Since the upgrade to 5.0, firefox wants internet access to update every day. Why?

    I have McAfee Antivirus Plus, and he tells me everyday since I've upgraded to 5.0 that firefox wants internet access for updating files. Before I upgraded, it didn't happen. What gives? Is - this legitimate, or something is weird going on here? Please notify.

    By default, Firefox is to automatically check for updates every 24 hours.

    • Disable automatic updates, if you wish (Options > advanced > update) and manually check whenever you want (help > about Firefox > check updates)
    • Activate the authorization in McAfee for daily check to occur without informing you (contact McAfree for instructions)
    • Change the frequency of the automatic update checking
      • type of topic: config in the URL/address bar and press the Enter key
      • If you see a cautionary, accept it (promise to be careful)
      • Filter = app.update.interval
      • the default value is 86400 (one day in a few seconds, it's 24 x 60 x 60)
      • Right click on the name of the option in the bottom panel, click on 'Edit', enter your new value, click OK, close the topic: config tab
      • The change may take effect immediately, or you may need to restart Firefox for the changes to take effect, I don't know who.

    You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

    • Next-generation Java plug-in 1.6.0_21 for Mozilla browsers
    1. Check your plugin versions on one of the following links:

    2. Update the Java plugin to the latest version.
  • unidentified network - no internet access windows 7

    Hi, I have a pavilion dv6 - windows 7 Home premium. everything was working fine until recently, but since this morning my wireless connection is coming as 'public network' with an error message "schooner - no internet access network. its connected to the router as usual with strong signals and other wireless computers work fine. I have not change whatsoever on my laptop but now I tried all the solutions mentioned on the internet. reboot/uninstall-install the drivers / updated drivers/called HP support/safemode network but nothing has worked so far. I use AVG Anti-virus if it's important. other ideas would be very appreciated. and how can I change a public network at my home netowrk in this case?

    Thank you

    Hello

    It may be an idea to set up a static IP address to see if it will connect you.

    Open windows control panel and open network and sharing Center.  Click on change settings card and in the next window, right click on your wireless connection, and then select Properties.  Left click on Internet Protocol Version 4 (TCP/IPv4) to highlight (click on the wording and not with the beat box) and then click the properties button.  Click the radio button next to "use IP address, then enter the following values. following

    IP 192.168.1.110

    Subnet mask 255.255.255.0

    Default gateway 192.168.1.1

    In addition, assign the following DNS server address

    Preferred DNS 208.67.222.222 Server (these belong to OpenDNS)

    Auxiliary DNS 208.67.220.220 Server

    After entering these values, don't forget to click OK for each open window, before restarting the laptop.

    Kind regards

    DP - K

Maybe you are looking for