wrt54gx2 cannot access 192.168.1.1 through

Similar Questions

• problems accessing 192.168.1.1

  I tried to access 192.168.1.1, but when I put the user name and password in it, it just reopens. My router model is linksysE1000. I tried admin for the user name and password, and the empty user name and admin password. Why it is not working?

  Thank you very much for this information. I talked to the person who has put in place, and he had changed the password. Fortunately, he saved a paper with the top pass . Thanks again!

• Not able to access 192.168.0.1

  To access my router through 192.168.0.1 configuration, it is unable to access with time-out error.

  Anyone have any suggestions on what evil is?

  Thanks in advance for your suggestions

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Your computer is connected to a domain network?

  Thank you for details on the issue.

  This problem may occur if a firewall blocks the access or the incorrect router settings.

  I suggest you reset your modem/router device and check if it helps.

  You can refer to this article:
  http://KB.NETGEAR.com/app/answers/detail/A_ID/9665/~/restoring-a-NETGEAR-home-router-to-the-factory-default-settings

  However, you can also try turning off the firewall and antivirus and then check the issue.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot access the application of planning through the workspace

  Hi gurus intended,
  
  I need your guidenace I'm unable to access planning through workspace to help navigate - Application-> planning-> Planapp1 (my request that I created in the planning planning URL); Hyp Workspace Error: Invalid or to find the configuration of the Module; --> required application module HyperionPlanning. It is not configured in planning. Please contact your administrator; --> communication error;
  
  I use Hyp 9.3.1 on windows 2000 Advance Server with SQL server 2005. while I have no problem to navigate directly from URL planning. Evenes am able to load data using the Regional service.
  
  I configured: Shared services, Essbase server, services of the Essbase administrator; Reporting and analysis services, Reporting and UIservices analysis and planning.
  
  Kindly advice.
  
  If possible send me details of correct order of departure services. I need to use planning through the workspace.
  
  Concerning
  Kumar N

  Hello

  Stop the planning server and re configure the planning through the configuration utility.

  Thank you
  TSR

• I cannot access Facebook, but it works through Skype.

  I can't access the site today, but it is on Skype?

  original title: facebook is down?

  No FaceBook isn't down. To care with FaceBook see the link below. Thank you.

  http://www.Facebook.com/help/?page=835

• Impossible to access the gateway 192.168.1.1 username and password is incorrect

  When I want to access 192.168.1.1the user name and password that worked before now don't work anymore! Why?

  If someone forgets his password it should do? How can I reset my login and my password?

  I really have to change the configuration of my router. My router model is WAG120N

  Thank you

  You can try to connect to the router configuration page using i.e. password default "admin", if it does not, then you can use "admin" as the user name and password and then check... If this still does not work then you need to reset your router.

  To reset your router press and hold the reset button on the back of your router for 30 sec then unplug the power supply and reconnect it back... But it will restore your default router.

• nested ESXi vHost, networking, the nested virtual machines cannot access outside the world.

  
  My Datacenter configured as follows:

  1. physical switch connected to 3 physical server.

  vCenter Server IP: 192.168.10.10

  two physical hosts ESXi: IP: 192.168.10.11/12.

  2. my laptop connected to the physical network, IP: 192.168,10.100.

  3. my two physical hosts configured with a Standard vSwitcher0, VMNIC0, portgroup MYLAN uplink vLan ID = 162, vmk0 vLan ID = 162.

  4. I created two nested ESXi vHost on the two physical host, assigned 192.168.10,101/102 IP, gateway 192.168.10.1

  5 standard vSwitch0 on two vHost, only NETWORK VM portgroup with ID vLan by default = 0.

  6. I have create computer virtual the virtual server nested and assigned to the VM using VM NETWORK, also assigned the IP address: 192.168.10.201, gateway 192.168.10.1

  But my VM, I cannot ping 192.168.10.1, also I can not ping the virtual machine (x.x.x.201) from my laptop.

  I can ping my vHost nested two of my laptop, can also connect to the console of the virtual computer through my vHost nest.

  my virtual world, my network is configured as it IS (external swith marking).

  my world physical host, my network is configured as a VST (virtual switch tagging).

  My Setup must in principle be correct, but it does not work.

  I am a newcomer to the world of VMWare nested.   I'm appreciated for any suggestions and help.

  The vSwitch on the physical host must be configured to allow the promiscuous mode and forged passes.

• Network sharing - cannot access local share of localhost on public IP - wrong password

  Hello. I have a PC that has a shared folder. This PC (A) a public static IP 192.168.1.1. This (A) PC, I try to access \\192.168.1.1 and it works fine.

  This PC (A) has a public IP 1.2.3.4 (roads of firewall on the router on 192.168.1.1 points). I can access both \\192.168.1.1 and \\1.2.3.4 of any PC on the network. Form (A) PC trying to access \\1.2.3.4 - he asks user name and password. After you have entered the correct user name and password it goes back to the connection with the error box that username or password is incorrect. I tried to enter user name & password of every user on this PC (A). I see that it selects the correct user (because of avatar), but don't always accept password. Of course, the same credentials works fine on any PC on the network. Password sharing out of switching does not work - it is still asking for password. There are Windows 7 Professional installed on PC (A).

  EDIT: I can't access from outside LAN network using \\1.2.3.4. Disable the firewall does not help. I have access to the remote desktop on 1.2.3.4 without problem.

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

  Thank you.

  Sincerely,

  Ankit Rajput

• Cannot access through a browser using the IPS 192.168.128.101 and 192.168.128.102 PowerVault 3600f

  Hi all

  I confronted strange problem during the installation of MD3600f I have connected a point to MD and assign 192.168.128.102 to my laptop. I did ping 192.168.128.101 (cont0) but could not access via a browser. I want to access controller in the command edit IP address. Pls advise.

  Rufat

  Download the latest version of the resource DVD.

  A Dell to look all this is en.community.dell.com/.../4234.dell-powervault-md-downloads.aspx. You will want to get this DVD resources 4.1.0.88.

• Cannot access the WRT320N cascading to the IP 192.168.1.2

  I have two routers WRT320N running.  The first is 192.168.1.1 IP and DHCP turned on and connected to the cable modem.  The second WRT320N is IP 192.168.1.2, disabled DHCP, NAT disabled.  The second router is connected to the first by using one of the ports labeled 1thorugh 4; the WAN port on the second router is not used.  Both routers are configured for wireless with an appropriate warranty, etc.  I put Remore management 'on' and put at the disposal of all property intellectual.  Now, I realize that remote management can be provided for use of the internet (not my intended use) rather than on the same home network.

  Good new first: the works of all things.  Devices wired for both routers have internet access and can 'see' each other for sharing of files, etc.  In addition, devices wireless on both networks seem to work OK, and the first router [192.168.1.1] shows all devices as clients, no matter what router they are physically or wireless connected to.

  Now the bad news: although it has worked reliably for days, I now can't access the second router [192.168.1.2] from anywhere in the network (no matter what router, the computer is connected to).  Work of its customers and you can test it with success of any computer, but when I type http://192.168.1.2 on IE or Firefox from any computer, it times out.  No dialog box asking for the password; not nothing.  All times out.  I tried the cyclical power router, but that has no effect.  Once again, during the first days, it seemed to work.  I could type http://192.168.1.2 of any client in the network and access the Router 2 very well and see its settings, set its SSID, etc etc.  Still, the router seems to work as I would and my network performance is OK, even for clients on the second router wireless, but I can not only access the URL.

  I'm sure I can hit 'reset' and that it will probably heal, but it also means that I have to start from scratch on a long list of the customizations I made to its settings, including. SSID, security, IP address, NAT configuration, etc. etc. (I save a configuration after I put in place.)  Is the only option to reset and then re - load the saved configuration? )

  Any thoughts here?  It is always tempting to blame firmware, especially when it works OK for a while, and then it stopped working.  Of course, I could also do sometihng evil.  Any help appreciated.  Thank you.

  to: Helm

  Thank you very much.

  It turns out that I had to do the factory reset, and then I have download the old config file until I'm your answer

  so far, all is well... the device seems to move traffic as it should, and I can access it again by entering the URL http://192.168.1.2

  I'll see how long the 'fix' hard... I really think they have a bug in the firmware there somewhere

  If she out craps again, I will set up from scratch, as you suggest.

  Thanks a lot for your help

  I think I'm 'good' for now.

• Cannot access my router through the Explorer configuration page

  I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.

  My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.

  Thanks for any help.

  Hi JBHPUser,
  
  (a) other router configuration page, you are able to access other Web sites?
   
  (b) what operating system and Internet Explorer version do you use?
   
  This article can be very useful.
   
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
  http://support.Microsoft.com/kb/956196
   
  You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
   
  
  Solve problems with computers not appearing is not in the network map
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
   
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   
  
  Aziz Nadeem - Microsoft Support

• Why can't I access the modem 192.168.1.1 when connected to the wireless router?

  I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

  This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.

• VLAN internal cannot access the Internet through PIX501

  Hello

  Im having problems with my current setup. We have Cat3750 switch which acts as a base for intervlan routing. At the same time, we have PIX501 as a firewall.

  the firewall is configured to statically map our Web server to the external network. The Web server is accessible from outside.

  My problem is the following. Internal users cannot connect to the internet. Each user has been defined with gateway for their assignment of VLANS corresponding. VLAN internal works fine but can not access the internet.

  Also, all users within our network cannot ping inner (192.168.1.7) address of the Web server. the Web server is directly connected to the switchport aboard PIX.

  Our facility is the following: modem DSL - PIX 501 - Cat3750 (InterVLan routing) - access switches.

  Pleasee see connected PIx and Cat3750 running config or reference.

  all inpiuts will be highly appreciated.

  Kind regards

  udimpas

  Add a default route on your 3750 score inside the PIX interface.

  IP route 0.0.0.0 0.0.0.0 192.168.1.5

• Cisco VPN Client anything cannot access through VPN on an ASA5505 8.4

  Hello

  Completely new to Cisco ASA and the need to get this working ASAP.

  8.4 (1) ASA 5505 is the secondary FW and I need to authorize all out and block everything coming, but for the VPN clients.  Since a jerk of Cisco, I used the ASDM and it's sorcerers to make this work, which may explain my situation.

  192.168.101.0/24 is the local network

  192.168.101.5 is the IP of ASA

  192.168.101.2 is the primary FW (and the default gateway for servers, I have to access through the VPN)

  10.10.101.0/24 is the VPN IP range (this can be what you want, I'm not married to it somehow)

  My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x or service server (tried RDP, telnet, ping, etc.)

  Configuration file is attached.

  Help pretty please!

  Thank you.

  Did you add a route for the VPN Pool on the main firewall to the ASA?

  Best regards

  Peer

  Sent by Cisco Support technique iPad App

• Cannot communicate with the first DNS Server (192.168.0.1)

  For about a week and a half now my brother could access the internet.  When "analyze us" the network connection, it shows the message above.

  Research for this phrase raise a lot of people with problems with wireless on a laptop, but it is an office with an Ethernet connection, which worked fine for the last 4 years of 100 MB.
  It is running Vista x 64.
  We managed to fix briefly by uninstalling the drivers for the network card and rebooting, but now even that does not work.
  Ipconfig/all shows, there always the same IP address that he always had and the NIC has the same with my fully accessible machine, 192.168.0.1 DNS server address.
  I have also tried the/flushdns / release & renew functions without result.
  I also tried to totally replace the drivers with a new download on Marvell website and still no joy.
  Here's a copy of his ipconfig:
  Windows IP configuration

  Name of the host...: PC-user

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: cable.virginmedia.net

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : cable.virginmedia.net

  ... Description: Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller

  Physical address.... : 00-1F-E2-59-FF-14

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::d987:5b5b:1123:788% 11 (Preferred)

  IPv4 address: 192.168.0.100 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Tuesday, August 28, 2012 21:23:09

  End of the lease...: Tuesday, September 4, 2012 21:23:08

  ... Default gateway. : 192.168.0.1.

  DHCP server...: 192.168.0.1.

  DHCPv6 IOOKING...: 301998050

  DHCPv6 DUID customer...: 00-01-00-01-12-A7-05-A8-00-1F-E2-59-FF-14

  DNS servers...: 192.168.0.1.

  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : cable.virginmedia.net

  Description...: isatap.cable.virginmedia.net

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  I'm going to guess that you have installed McAfee? There was a problem with her recently. Try to uninstall/reinstall.

  https://KC.McAfee.com/corporate/index?page=content&ID=KB76004&ELQ=a20a206709c24aa9ad7bcbfd33282145

  I hope this helps.