WRT610N connection of storage usb and windows 7

Similar Questions

• Key USB and Windows 7 Home premium

  My laptop is running Windows 7 Home Premium.  Bought a new stick of memory: Kingston DT101 G2 16 GB USB2.  When I connect it to the USB port makes it sound, I get a small icon memory stick right background, if I go to devices and printers he recognizes her as a generic "USB 2.0 Data Traveller" and if I take that he recognises that he is gone.  HOWEVER! It came not my thing I can save in. When I look on properties it comes up with three sections:

  Kingston (UMBus enumerator location)

  Kingston Data Traveler 2.0 USB Device (USB Mass Storage Device location)

  USB mass storage device (location Port_ #0001.Hub_ #0008)

  When I right click to browse the files it is shaded on.  within days old (!) I would have changed the drive but I don't seem to be able to do.

  Help, please!

  Connect the player to a Linux machine, open disk utility and reformat the drive in FAT format.  It's crapware on the drive of Kingston and Windows Defender or your antivirus software blocks the function of the training because of the behavior of the crapware.

• Transfer of data from FAT32 to key USB and Windows 7

  Hello

  I have a Dell USB external 1 terabyte drive, it is formatted in FAT32.  I had no problem with the mobile file from my PC Windows 7 copy and play (video) files.  I used my DVD/Blu-Ray player to view files and for some reason any, he started to not work as well.  I deleted the files and the re-formatted the drive and now it takes forever to copy a file from my PC to the external drive, and when I click on most of the files, I get the green bar and after that windows explored hangs or Windows media player only.  When I try to access the files on my internal hard drive or if the wireless (on my internal hard drive) I have no problem.

  Any help would be greatly appreciated

  Mark S Macy

  Hi Mark,

  I suggest you to connect Dell external USB 1 terabyte drive to another computer and see if the transfer rate is fine. If the transfer rate is thin on the other computer, then there is a problem with the drivers on the computer. If there is a problem with the transfer of data on the other computer too, then it might be a problem with USB.

  Post us the results after trying the steps above.

• I have size 32gig usb pen drives. Windows says that they are 28gig and I have two 4 gig usb and windows says theyr'e readers are 3.6gig each. Ugh, I need my 32gigs size

  I have 8 32gig usb and 2 x 4gig usb pen drives. My 32gigs are reported by windows 7 as 28gig and my 4gigs are reported by Windows 7 as 3.6gig. I was the look at the size etc and I can not change the size, even when I get a bit of it, it still doesn't let me have any size. It's driving me crazy.  Someone else had this problem? He acknowledges that my hard drive is more a 100gig, then why doesn't it let me have a 32gig player pen?  Come on bugs from Microsoft, a person must know why and how. Please tell me. Ta very in advance

  Hello

  In each memory space is reserved to system files or material information, and there is nothing to do with drivers.

  As in my previous post says that the storage devices are measured in bytes and when they are converted to GB, there is a difference in the size of the memory.

  If you take any flash memory, pen or external hard drive memory drivers appear exactly that, there will be variations.

  You can even check with another computer, and the result would be the same.

• B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

  Presario CQ57-400SO.

  I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

• Belkin router low with USB for storage drive and Windows 7 do not get along?

  Hi all!

  We have a Belkin N wireless router + with a USB stick 'slot' in the back with the rest of the cables. The USB option is actually the only thing that made me buy the router in the 1st place! Anyway, it does not work when connected to the router, even if the network is running perfectly. It is a Seagate external hard drive and when it is plugged it's high lights of the page, there is no power cable so that it can be plugged into the wall. NTFS system I think. I use Windows 7. I tried so many different things, trying to connect this dag on drive to the router, I've exhausted all efforts, it seems. On belkin under my model site there a Belkin Storage Manager, but there isn't even a request, is just a plateau that is located on the bottom of my screen, the only thing I can do for her, is shut, it is the only command that opens. Oh and the website says also I can enter my routers address in IE followed by a slash and the name of my seagate... the drive is H, so I tried different versions of H:, tried FreeAgentDrive, etc...

  .. I think it is a windows problem, b/c not only not Seagate turn on, under the watch USB (via IE, default routers page layout), the connected router settings. In addition to the light on the front of the router is 'active', blue and work.

  HM... I run windows 7 Professional / 64-bit / don't know not what other information I have to give... I don't think that the external hard drive would have it's own IP address when you are connected to the router... could it? Also, my service is comcast with dynamic IP address assignments... so it would not stay dry alike... correct?

  Oh, and the external hard drive works wonderful connected directly to my laptop and an XP computer at work... so router maybe not is not talking computer properly the drive... I should have some sort of security "allowances" on this drive until I put it on belkin?

  I'm sorry this is a NOVEL, someone help please? I've been addressed under and turned off for a year... I get very frustrated with this!

  : D

  Try changing the drive letter and y or X. mohanad

• I have some problems when connecting my hub USB for Windows 7.

  Original title: Windows 7 & PnP...

  I have some problems when connecting my USB hub (this is PnP)...  I don't know Don t what the issue with windows 7 and PnP´s, but I ´ve read some info about it on the net saying that peripheral soe Pnp will not work on windows 7... So, what can I do?

  Hello

  1. What is the brand and model of the computer/hub USB?

  2. what happens when you plug the USB hub to the computer?

  3 - is it is not detected?

  4. other USB devices work?

  Response with more information to help you further.

  The hardware which are not compatible with Windows 7 will not work with it. However, almost of hardware and software are compatible with Windows 7.

  Step 1:

  See if the USB hub is compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Step 2: Run the following fix - it:

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?

• I can't connect to my hotmail and windows live reset does not work for now please help

  I can't connect to my hotmail address and reset link does not work... keeps telling me to come back later

  Hello

  Please repost in the correct hotmail forums the link below

  http://windowslivehelp.com/product.aspx?ProductID=1

• Security Server / connection to the server and windows 2003 server roles

  Y at - it no server role recommended I should appy to each of my servers windows 2003 in order to better to run/manage the

  1. security in the DMZ server and

  2. Broker within the network Corp.

  or better, I'll have no windows server role defined on two machines?

  Well, officially, you can use the Security Configuration Wizard to lock your server more far. But I saw that it really breaks things. I would just disable services you need (as always) and trust in your firewall. Of course, only open ports on your firewall required specifically by the Security server. Internet: 80 and 443.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.